Reviews
Change the look
The best part that change the look of bike, sporty and cafe racer style, easy install by your self. Everyone stop me in road to ask about motorcycle model and the beauty look View detail
Bless R under cowl
About quality and texture Hard and strudy plastic. Not very heavy on weight. Not painted. Have to wrap it in vinyl sticker or spray with paint. About the feeling of use No increase in noise from gear changing. Covers the the side view of the catalyzer. Exposed only the manifold and the muffler. Products to buy together Use only on stock exhaust. Not sure will it fit after market full system exhaust kit. Difficulty of installation Fits just right with the front header in contact with the cowl. No issue when fitting with the brackets provided. Heat sheets with adhesive are provided. Takes a while to cut and shape the interior but no issues. Maybe around 30 minutes Cost performance and comparison with other products Price is average around the same as other unpainted products available. But still worth it. About shipping and packaging Big box shipping is expected with syroform sheets covered. Any concerns, cautions, or advice when purchasing Definitely need to wrap with vinyl or paint as the product outlook is not presentable with white sanded patches seen on it with unpainted version. You may wanna consider buying the painted version. As for there's one area which is closely in contact with the front on the manifold, it's not sure the heat for long period with burn down the plastic or sticking to the manifold. Fingers crossed. So far with no issues yet seen. View detail
Very satisfied.
It fits well and looks great, like a genuine product!
There is a slight interference with the manifold on the right side, so it is inconvenient to widen the gap with the included washer. It would be better if this part was corrected during the manufacturing stage and shipped.
Also, there was a slight defect in the paint, but since I purchased it overseas, it was cumbersome to exchange, so I'm just going to use it.
-------------------------------------------------- -------- It fits well and cool like a genuine product! The right mani folds are slightly interfered with, so there is a hassle to open the intervals with the enclosed washer. In addition, there was a slightly bad painting surface, but it was cumbersome to buy overseas. Powered by Google Translator
View detail
Fit akro headers?
About quality and texture About the feeling of use Nice painted finish. Would have prefered satin black. About Design Fits around the Akrapovic headers nicely. A bit close on exit as pictured, the akra headers exit a bit higher, still 8mm gap. R77 slipon is clear of cowl About Size Chart The right hand rear fixing nut needs grease on a ring spanner and long fingers. Cost performance and comparison with other products Sleek design, should cut through the air nicely. About shipping and packaging Came undamaged. Any concerns, cautions, or advice when purchasing Scratches easily but to be expected. View detail
Perfect!!!
Order the undercowl to paint it Matt black. Fit and finish is superb. All parts like nuts and bolts are there, even a manual how to mount. Fits perfect, looks perfect View detail
Buy Clear Finish Carbon Products
I bought a carbon product and had no problem installing it by myself. The carbon finish and installation are perfect, but there is a slight interference with the manifold and there is a burning smell while driving. It seems that the cowl needs to be changed a little. I am willing to purchase other products in the future. ------------------------------------------------------------ -------- I bought a carbon product and it was hard to install it alone. The carbon finish or mounting is perfect, but there are some manifolds and interference, which makes the smell of burning while driving. After flavoring, other products are also willing to buy. Powered by Google Translator View detail
Material:Recommended for those who want Carbon
OEM Material:The silver color of the aluminum was not quite right, and I thought about painting it black, but I decided to keep the OEM parts as they were and searched for other brand products in black, and this was the only one I could find.
Material:Carbon is indeed light, but OEMMaterial:Compared to Aluminum, the Bolt retention of the One Side 2 points is undeniably squishy.:Is this what Carbon is like?
Material originally:I didn't want to install Carbon, but Material:As for me who wanted a Black type even if it is Plastic, I could have tried to find parts of other color VERSION of the same car model. I regret it a little.
Material:I can recommend it to those who want to install Carbon. (It is expensive, but........)
View detail
비싼가 격이 지만 그만큼 큰 만족 / Expensive, but not so satisfying
I was looking for an undercover that covers the back, and I liked the design the most, so I bought this product.
It's not a brand I've heard of often like Overlaying, Magical Racing, and A-Tech.
In fact, I was a little hesitant to purchase it, but fortunately, I am very satisfied with the result.
It covers the genuine exhaust pipe well and fits well without any problem even though it is a handmade carbon undercover.
Depending on the condition of the vehicle, it is necessary to adjust the gap to some extent with a washer, but
There were no major difficulties in installing it.
It would be cumbersome to have to unconditionally remove the under cowl when changing the oil in the future.
Delivery took only a week as it was a weekend.
If the product is in stock, it seems to arrive in 4-5 days.
In the future, I think we will be paying close attention to the products of this brand. ------------------------------------------------------------ -------- It is a product that I bought the most because I liked the design while looking for an undercover that wrapped up to the back.
There was some, but fortunately, the conclusion is very satisfying.
Sensing the exhaust pipes of genuine, even though it is a carbon -made carbon undercover of handmade, the fitting is good without any problems.
Washer in the state of the vehicle should be cleared to some extent, but there was no difficulty in installing.
It's cumbersome to remove the undercarls when you replace the oil.
Delivery took just a week on weekends.
If you have stocks, it seems to arrive in 4-5 days.
I think this brand product will be noticed in the future. Powered by Google Translator
View detail
Changes the look!
This is changed the look of my bike so much. Instructions are easy and it comes unpainted. I ended up painting (rattle can) gloss black and it worked out. No issues...and works with after market exhaust systems as well. View detail
Beautiful
Fitted first time without any hassle, and it looks beautiful. Weighs about 1/3rd of the originals weight so that is a bonus. View detail
provides more cooling
I installed the part on my XJR 1300 Bj 2000, so it fits. it should provide more cooling. It does (minimally), but you shouldn't expect miracles from it. I ordered the unpainted version. I think the price for the painted version is too expensive. -------------------------------------------------- -------- I installed the part on my XJR 1300 BJ 2000, it fits too. It should ensure more cooling. It also does it (minimal), but miracles should not be expected. I ordered the unpainted version. I find the price for the painted version too expensive. View detail
Disappointing quality!
I ordered it in a black gel coat finish which you would expect to arrive unblemished. When it arrived the black gel coat had been sanded through all around the edges exposing the fibreglass. One of the mounting points looks to have had an internal repair which has left a huge amount of resin built up around one side of the hole stopping you from being able to tighten the nut up squarely, if you tightened it it would break the mounting point. Required hours of messing about to make it fit nicely and then has to be painted. Wish I could post more than one photo. View detail
Feel the passion
This seat cover is beautiful! I really love it, it really gives the CB1100 a sporty look. I can now say to my girlfriend that I cannot take her to run her errands now because I can't fit her on my motorcycle, now she has to get her own motorcycle. The quality of the build is exceptional and the design looks perfect, another quality product from Japan! Highly recommended. View detail
I'm happy with the way it looks
Fender in frustration with the OEM's long Rear Fender and Light mounting portion of the pedestal I was torn between Eliminator and Short fender and the look of Short fender I decided
It looks better
One complaint I have is that unlike the OEM, the position of the holes and the color is not as good as the OEM
View detail
The build is satisfactory, but the paint Level is low
The design is Simple and I personally feel that I am happy with my choice
The accuracy of the mounting holes was high and there were no problems
You won't even feel the Floppy while driving and it is well built
It's a shame [Color] Clear paint quality
Some poor pre-treatment or too thick a coat of paint, or a few hazing marks are visible
When you install it, it is a visible part and noticeable
Also, there is a bad skin and Garbage bite in some parts, and there is a mark that seems to have been applied to a hanging jig or something It was
It takes more than a month to deliver [Color] I wanted to have it fixed and delivered if it was going to cost 10,000 yen more to add a clear paint job
Because of my profession, I can paint it myself [Color] I'm glad it was a ClearUnpainting product
When I contacted them in advance, they replied that Unpainting products are not supported at the moment, so I had no choice
Please remove the listing of Unpainting products on the Site
I've modified and repainted it and I'm not asking for a return or exchange, but I urge you to tell the manufacturer what you posted
View detail
Bless R'S rear fender
Good product simple assembly, you have to disassemble the glove box under the saddle to disconnect the plug of the rear light. Apart from a few small strokes of Lima to the holes in the headlight support, everything matched perfectly. Perfect packaging. Delivery time in line with Economy about three weeks. Watch out for customs fees around 60.- CHF Thanks Good product, simple assembly, you need to disassemble the drawer to hold objects under the saddle to disconnect the rear headlight pin. Apart from a few small strokes of Lima to the holes of the beacon support everything matched perfectly. Perfect packaging. Delivery time online with Economy about three weeks. Watch out for customs fees around 60.- CHF Thank you translated by Google Translator View detail
Bless R'S rear fender
Excellent product, the only drawback I had to file a bit the holes of the headlight support because they are not perfectly aligned. Shipping and delivery on time. Ok packaging. Great product, the only drawback I had to file a little the holes of the headlight support because they are not perfectly aligned. Shipping and delivery on time. Packing Ok. translated by Google Translator View detail