Reviews
I was able to install it with R80Basic.
I had been looking for a R80GS Basic Pannier Sty on Yahoo! Auctions, but was having trouble finding one, but Webike had it available. After ordering, I was told that I would have to wait a month for it to arrive, but it actually arrived in about two weeks, and I was notified that it had arrived earlier, and I appreciated how quickly it arrived and how polite they were in their communication.
The Pannier stays are black in color and should be easy to install with two or more people. hang temporarily fasten the bolt from the Rear side and temporarily fasten the other bolts as well. The hang is done by temporarily fastening the bolts from the rear side and gradually tightening the bolts more and more.
I have not been able to install the Pannier case because I do not have a BMW OEM Pannier, but I will purchase it again because I have been told that all Side cases made by Hepco & Becker can be installed. It is perfect and I am happy to be able to purchase these additional Cases to enhance my Motorcycle equipment. This makes me look forward to touring more and more in the future.
Overall, we are very satisfied with our purchase of Pannier Sty. The product arrived quickly, was easy to install, and the Pannier case, which is purchased separately, is also very attractive.
View detail
Can be installed as per Instruction Manual
I wanted a RearCase for my FZ1, and when I searched for one, I found either Hepco or GIVI, but GIVI requires a little modification to the cowl, so I chose Hepco, which I was told can be popped on.
The delivery time after placing the order was about a month. This is as advertised, but I think they probably ordered it from Germany.
The Carrier's bar was sticking out of the step ball when it arrived, which was not acceptable, but there was no damage, so I installed it as is.
I don't need Special Tool, but it is surprising that I needed 13mm Spanner. It is a size that is not often used.
The only part that was a bit difficult was removing the pin that holds the Tandem Footpeg. I managed to remove it by making full use of the radio pliers and pliers I had on hand.
The Instruction Manual is only available in English Version and in German, but there is a PDF version of the Manual on the ManufacturerSite, so if you download it and write a translation, you can see the translation (you can see it by typing here, but it's not that difficult). It is not in English version, so I think you can read it as it is.
If you are a beginner, it is better to work with two people. One person could hold the Carrier and one person could tighten the Bolt.
The accuracy of the parts was fine and came on Beauty. There was no particularly bad Gap or Bolt not closing.
As a precaution, when attaching the mounting plate of the Case, there were cases in which the Plate lid would not fit depending on the position of the Bolt, so it is like looking for the position of the Bolt while thinking about how to close the lid.
If the Bolt is not oriented as per the Instruction Manual, the tool will hit the Body, use a Spanner where the Wrench will not fit, etc.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09
Conforming parts indeed!
Product Name
HEPCO & BECKER:Hepco & Becker Top case holder
Item Number
661-4573-0101
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to install a Hepco & Becker Top case on my MT-09.
Was the one you received as per Image?
It was just like the Image. There were more Parts such as screws than I expected.
Was the installation difficult?
I don't think there are any problems with the position of the screws, etc., as they just need to be put back in their original positions. Also, I think it is difficult to position the base of the top case.
How was your experience with it?
I knew it was a guaranteed fit part, so it was a perfect fit. Although it was made overseas, I am glad that I was able to install it without any problems.
[Included Parts:were they on?
Foreign language handling Instruction Manual only.
[Was there anything that disappointed you?
I can't help but notice the high price. I think it can't be helped because it is made overseas.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
(car) being safely installed
The Instruction Manual is in German, so it's a bit odd that it's in Large, but I was able to install it on my 750s1 and it seems to work on the 1100 as well if you read the Instruction Manual. But I think it depends on the year. View detail
One-shot mounting is easy
Easy to install the bag with just a simple screw. View detail
Fits: SUZUKI V-Strom650, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SFV650 Gladius, SUZUKI GSX-S750, SUZUKI GSX-S125, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R125, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600, SUZUKI GSF1250S Bandit
Easy detachment
Attachment to attach Hepco & Becker Tank Bag.
Inside is a Male Base plate to be attached to the Motorcycle Tank, a Female Adapter to be attached to the Bag, Rubber cushioning material to protect the fueling port, and a PlasticCap for when the Bag is not attached.
Installation on the Motorcycle side is as simple as removing the three screws and installing them, and takes less than five minutes if you are familiar with the process.
The process for attaching to the bag side involves drilling a hole in the bag, so the time will vary depending on the item to be attached.
I installed it on their product ROYSTAR and it took about 30 minutes from positioning to drilling and installation.
It is recommended to start from the Motorcycle side Plate and check the installation position before modifying the Bag side.
View detail
Easy to use and install
Even when the side case is not attached, the silhouette is less noticeable.
I like the fact that it doesn't break down.
Installation requires only basic tools such as a Spanner and takes less than 30 minutes, even if you are not particularly skilled.
If available, it can be installed.
View detail
It is easy to install., Now you can install the top case and touring is safe!
The price is a little bit high, but it is the only option if you want to install a Large capacity Top case. View detail
Fits: SUZUKI V-Strom650, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SFV650 Gladius, SUZUKI GSX-S750, SUZUKI GSX-S125, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R125, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600, SUZUKI GSF1250S Bandit
good
It's easy to install, and I recommend it because it's specific to your car model and easy to use. View detail
A strong ally for solo travelers
The Tandem seat is a replacement for the Carrier, but I think it will be a strong ally for those who go solo camping. I loaded the Enduris Tan Drum bag Size XL on top of this extended plate and attached a SoftSaddle Bag to it for camping. I used a locking strap and a bar to prevent the Saddle Bag from getting caught in the bag, and I think the bag was very stable. View detail
Fits: TRIUMPH Street Twin, TRIUMPH Speed Twin 900, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100 Black, TRIUMPH Bonneville T100
Can be used with KIJIMA's Side bag support
[How is it used?
I am using it with BONNEVILLE t120. The fixed Box is not installed, and it uses it as Rear rack which puts Bag etc.
It can be installed at the same time as KIJIMA's side bag support, and both are tightened to the screw holes on the top of suspension.
Was the one you received as per Image?
Matte texture is nice.
Was the installation difficult?
The instruction manual was written in English version and German, so I could not read most of it, but it was illustrated and there were few parts, so it was easy to install with basic tools.
If you have the standard Grab Bar, you'll probably have to replace it, so your situation may be a little different.
How was your experience with it?
When I put the bag on the Rear Sets, my back hit the bag and I couldn't concentrate on riding, but this problem was solved when I started using this holder.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
It is not a problem of the product itself, but I have a Helmet holder for KIJIMA BONNEVILLE t100 on Seat frame, and it interferes with it. If it had been a type that attaches to the Grab Bar Bracket for the t120, I might have been able to relocate it.
Because it was inevitable, I adjusted the diameter by winding the Vinyl type around the Pipe of this Holder, and decided to relocate it.
View detail
It's a bit pricey, but I would recommend it.
I finally bought it.
It looks like it was ordered from Germany and it arrived about 3 weeks after I ordered it.
The installation was done by looking at the German and English version of Copy's Manual. I had to look at the unclear picture of WhiteBlack to make a hole in it, but I managed it.
As you would expect from an expensive product, it seemed to be well made.
I used to have a Daytona Carrier before I put this on, and it was a very good product, but if I skipped washing the car or something, it got pretty rusty and looked shabby.
I'm going to be careful with this next one.
It's divided into 3 parts and assembled by Bolt, but when I hit it, the position is a little bit different and I had to tighten up to fit it, but that's probably how it is.
It also bonds to the bolts where the license plate will be attached, which significantly reduces the vibration shake of the rear fender and license plate.
After the installation, the rigidity around the rearRear Fender is clearly increased and it is extremely firm and secure, because SR400 has a large vibration.
There are quite a lot of drainage holes in each Pipe so that they are not noticeable. Is it to prevent the corrosion from inside? I think it is better to seal the holes to prevent corrosion, but I don't know how to do that.
There is a bar between the Top Carrier part and Seat. (Pannier) I only use it when I want to stand the Center Stand with it on. I don't have anywhere else to hang my hands, so this is very useful.
Well, but I think I'd be complaining if it wasn't there. I'm not sure if this is a good idea.
View detail
It's just a steel plate, for people who use Speed Rack.
I bought it together with their Speed Rack to solve the load capacity of my s750. The big seat bag can be used of course, and it is convenient to put the L-shaped bracket which I bought at Home center on the Bolt and put the side bag through the harness of the side bag. I feel that it is high that it is nearly 10,000, but how is it... View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB300R, HONDA CB300R
Dramatically increases the load capacity of the CBR650R
CBR650 with short Rear Sets and SeatBack that does not allow the Large Threshold to be used HolderBody is an item that increases the payload of the CB650R Because it is firm and firm, and there is also a Lock Function, there is no rattle In addition, the Back that can be used has a soft case that is hard to affect the feeling of driving, rainproof You can choose from Hard case, Leather style case that would fit CB650R, etc The case doesn't stick out too far to the side It's hard to affect it when you're running You can remove the Case when you don't need it and run with it off, and it's U-shaped like a bow when it's off, so it's not noticeable Or, on the contrary, is it fashionable? This is a good choice for Tourers View detail
Fits: YAMAHA Tracer 900, YAMAHA Tracer 900 GT
Expensive but useful
Side case, a bracket for installing the Ovid When you don't use the side case, it looks like the picture, and it is very easy to put on and off It's good because it's not too noticeable
I was hesitant to buy it because of its high price, but with the SCENE used for Touring, it was easy to put on and take off I think Merit is a good choice for Large, as it locks with a key to reduce the risk of theft It is
View detail
This makes the camping bag large and sturdy
I installed the Rear carrier extension plate on my GSX-S750 It is very well made by Hepco & Becker I installed Seat bag or Boston bag directly to Seat and went to touring and so on I used to have a carrier, but my luggage got dislodged while driving and I had to tie it back on the way I was looking for a good carrier, but I found a Seat at Hepco & Becker I found a Carrier that I can remove and install and ordered it right away This Plate is available in two types of Large size, NORMAL and Small Large also means Small It's not a big, but it's a NORMAL large threshold
Seat bag and camping bag (50L) are not so different from each other I installed it, and it fit in Balance well Side bag is also good I'm happy with the C-BOW Type and it's well put together
View detail
I'm a worried Kit
This is the front and rear adjustment kit and it is marked as one set This side bag is labeled Quantity:Pair (for Left and Right) Separate and Quantity:Pair (for Left and Right) There are two ways to purchase this product:One set and Quantity:Pair (for Left and Right) At first I ordered two because I thought I needed two, but when I asked about it, I was told that it was only one and that it was Large and strong One is Canceled When I opened the package, I found out that it was Quantity:Pair (for Left and Right) I was relieved to see that there were four of them in the box As I thought, without this kid, Rear's Blinker would have been a hidden Blinker in Bag The flashing was hard to understand and I couldn't drive safely It was the right decision to buy this kid View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Urban G/S, BMW RnineT
I like Orthodox.
I do not want to have any luggage in my body as much as I can, but with tool loading and accommodation Touringetc. I want to do.
Carrier like breaking the design of Motorcycle has a bit of resistance, for those who.
This MODEL is an Orthodox PipeDesign and it makes a relatively clean impression.
By attaching Carrier, the feeling of RnineT's clarity is slightly lost, but I do not feel such a strong discomfort.
Tandem seat on Saddle Bagetc. When attached, the feeling of cramping was improved.
However, since the attached fixed Screw is a hexagonal Screw that looks somewhat cheesy, I wanted to stick to Torx.
Also, those who are planning to change Seat to something other than OEM may interfere, so be careful.
View detail
Fits: TRIUMPH Tiger Explorer 1200XRX, TRIUMPH Tiger Explorer 1200XR, TRIUMPH Tiger Explorer 1200XC, TRIUMPH Tiger Explorer 1200XCX, TRIUMPH Tiger Explorer 1200
Installation of Tailback OK
UniversalTop Case Holder (Carrier) I installed "Easy Rack" Black. It will be used in place of Hepco & Becker's Aluminum Rack.
Until now I used Aluminum Rack in the vertical positioning guide. Although there was no problem such as precision and strength of the product, the installation of the Tailback felt inconvenient because it was not able to install well because of the positioning guide standing vertically.
This product is a product that folds Guide increases flexibility in attaching Tailback and can be installed in your favorite position. When not using Top case, Rearreshing around Rear made it possible to fold. It is popular also from friends.
I think that it's strength as it can be folded, but it is nothing different from Aluminum Rack.
Mounting the top case securely - You can fix it.
Hepco & Becker is something that is only said to be strictly healthy.
Regarding the evaluation, I think that the price is generally higher than other Manufacturer. ☆ It is a place I would like to do, but I made four ☆ with the sense of security of the product.
View detail