Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF300 Rally, HONDA CRF250 L, HONDA CRF300 L
Travel to Motorcycle
This is the items needed to install a Hepco&Becker bag. The Instruction Manual is a mess, with pictures, but I couldn't understand it from the pictures. The text is a translation (not "please type here", so let's reopen it).
There are some problems after installation. First, you can't open the Case with the on-board tool, it hits the bracket. The OEM helmet lock does not work, the helmet hits the bracket and does not fit in the lock.
View detail
Satisfied with the use of the extra tank batts.
The tank bag is old enough that it is not necessary to install a top case, and the RearCarrier can be attached to it. View detail
Parts in the image is missing 1pc.
I am satisfied with the product. The contents are different from the picture, but that can't be helped because it is an overseas product. But View detail
HEPCO & BECKER Hepco & Becker C-BOW forward/reverse transfer
Thanks to this product, the Side Back no longer interferes.
I was able to replace it with a Fuenderless Kit.
View detail
Hepco&Becker C-BOW
Installation is very easy and can be done by anyone with tools! No special modifications are required! View detail
C-Bow
[How is it used?
For Touring
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
it's simple
How was your experience with it?
Only driven once, but not bad.
[Included Parts:were they on?
Washers, screws, etc. for installation are enclosed, and they are used to fix the unit in place.
[Was there anything that disappointed you?
Not sure yet, but so far none.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Urban G/S, BMW RnineT
You can't put a Top case on it, okay?
When touring in Tandem, the two C-BOWSoftPannier are not enough for cargo space, so we decided to install a Carrier.
Like Nine Tee. It's all about looks. I don't think it's tactless for a motorcycle, but it already has a C-BOW, so I decided not to bother with it.
The Pillion Bar was installed at the time of purchase, so it was installed as an exchange for the Pillion Bar.
Viewed from the side, the top surface of the OEMSeat and the horns match, so there is not much discomfort or foreign body sensation.
The Tandem is also Large sturdy enough for Tandem use, as it leaves a small portion for Passenger to grab even when loaded with luggage.
Incidentally, as stated in the Title, the Manual states that the Top case cannot be installed.
Are dedicated products OK? The most Large load capacity is 5 kg.
The installation manual is translated into both German and English versions (no "Please enter here").
View detail
Can be installed in SMART
I bought this for long touring.
Installation is easy, but it is designed to be installed on a normal fender, so some modification is required if an external Fender Eliminator Kit is installed.
I was worried because I saw on this site that the Fender Eliminator Kit of Active requires a large width modification on the Fender Eliminator Kit side, but since ours was a YOSHIMURA kit, it was only a small modification.
The feeling of use is that it can be installed tightly, so there is no anxiety even when driving at high speeds or swinging around on mountain passes.
Also, I am glad that the bag is matched to the car even when it is installed, and it does not destroy the forme of the car body in a large size.
View detail
Both functionality and design
I decided to install the Bracket on my EJ11AGSX1300R HAYABUSA because I already had a Side Back for the C-bow and also to improve the load capacity. I think that the Bracket is good enough not to spoil the RearDesign, but it may not be recommended for those who especially care about the flowing design of the GSX1300R HAYABUSA. View detail
Rather than making your own.
When I installed C-BOW and StreetCase on my BMW R nineT, the bag interferes with the legs of the Tandem rider, and I can only hang my heels on the Tandem Footpeg.
I was thinking of making my own with aluminum blocketc., but WebikePoint seemed to cover half of the case, so I bought it.
There are no problems with installation. Depending on the direction of installation, it can be moved forward or backward.
With the STREETCase installed, the interference with the Tandem rider's legs is almost gone, and I can now put my feet on the footpegs.
However, in the case of the Ninety, when the Case is installed, the safety standards for the position of the Blinker will not apply. "Visible from anywhere within a range of 20 degrees inward and 80 degrees outward of the winker." So, I will have to relocate the rear blinker.... (No problem if Case is not installed).
View detail
Improved load capacity of the REBEL 1100
When I don't use the side bag, I want to use the seat bag because the bracket is in the way or doesn't look good. It has many slits, so it is easy to use according to what you load, and it is sturdy, so it will not bend easily. The disadvantage is that it is a little expensive. By the way, it was possible to attach a side bag if I devised it. View detail
It's a Universal Product. (Polish & nabla; Polish)
I bought and installed it to extend the load capacity of the OEMRear Carrier for my off-road motorcycle, KLX230 ^^.
This time, there is a lot of luggage to bring because of the training camp license P-RAN, and it is installed to load TANAX Moto fizzCampingSeatBack2 stably.
Contents are Plate for loading expansion. (480mm×280mm trapezoidal, bending process available) ×Quantity:1pc.、Filister head screw M6×20mm×4、Baby washer 6.4×18mm×4、Self lock nuts M6×4、Washer6.4×4、Holding shackle×4、Carriage bolt M6×16×4、Embiem Hepco&Becker 30mm×Quantity:1pc.
All installation manuals are in English version.
It is relatively easy to install, and I understand it somehow, but the Japanese version is attached in Webi treatment. (Polish 3) |4 stars because boo! ( ・∇・)
For the installation of the OEMRear Carrier on the KLX230, the supplied M6×20mm is not long enough, and you will need to purchase four M6×40mm×at your local Hommensen.
After installing the bike, I went for a test run while shopping, and even with the SeatBack and luggage on board, the bike behaved very well without any gaps.
View detail
Even a Large Bag won't tilt!
I was worried that there were too many parts that protruded from the rack when I put my new Tanax MiddleField Seat Bag on the Hepco & Becker Speed Rack that I have been using for a long time, so I added this product to it.
Unfortunately, the hook holes in the four corners of the extended plate are not compatible with the Belt that comes with the Seat bag, which is sold separately from Tanax. "Center Fixing Belt and fixed the buckles of the diagonal to each other so that they are X-shaped behind the Speed Rack Body.
It doesn't hang out of the seat bag with full of luggage. I can run without worrying about my luggage while driving.
View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
It's a pity that Rear Sets and One-touch can't be used for conversion.
It was even tougher than I thought it would be.
For that price, couldn't they have used the same mechanism to fix the Normal seat?
I couldn't find anything else, so I didn't have a choice.
It's very secure (it's a bolt stopper, of course) and can carry a large bag.
View detail
I'm satisfied
I installed it on MT09
C-BowBracket and Y's Gear's OEMRear Carrier co-tightening If you install the Hard case Ovid, there is no space to turn the key, and the removal of the key is smooth It is not possible When I installed this product and moved it up 30mm, it created a space to turn the key, and I was able to turn the key to install it Removal and BoxOpening is now much easier
View detail
I feel good without the bag
It arrived 3 days earlier than scheduled It arrived 3 days earlier than scheduled The instructions were all in horizontal letters, but I was able to see the pictures and install it It took me about an hour to complete the installation of the Boomerang I think Hepco & Becker are well made and well organized without the Bag I just thought it would look better if the Nut-related material was black But if the material of Plating is Black, it will look even better I think View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Although not quite what you'd expect
The YOUTUBE video shows how to install the One-touch seat in place of the Tandem seat It was introduced as if it could be done, but as for R1, it was Bolt tightening
I think it can't be helped because there is a Key lock in the seat itself, but I still have to do something I wanted it
Although there are some minor complaints about the included Seal material being cheap, the quality itself is unquestionable
The ability to add a space for a bag to the R1, which has no loading space, is still very attractive! It is
View detail
Generally good
I thought that if I left the Holder on, it would be conspicuous and I would lose my Refreshing view I was
Thanks to the powder coating, it doesn't stand out and is quite good
However, it was a pity that the screws are the same color (silver color) as the screws It's a bit of a hassle, but I painted them
View detail
Ideal for long touring with KTM RC 8
Anyway, it is a bad Motorcycle, so it is indispensable for staying tour. Tank Bag can not be attached with any magnetic force and also helps bad fuel economy It is almost not used from the troublesome at the time of refueling. Monokey base is attached to this product and TREKKER of GIVI is loaded. Easy to install and dismount Two is used for RearBag of PowerParts for day trip Two. Although there were almost no options for other products, they are satisfied with both convenience and Design. The difficulty is the price - - - - - , I would like to buy if it is a more reasonable price. View detail
Fits: BMW F800GS, BMW F650GS Twin, BMW F700GS
When attaching, the attached Spacer was used, but die length was not able to attach short about 7 mm. Be careful.
When attaching, the attached Spacer was used, but die length was not able to attach short about 7 mm.
Be careful.
View detail