Reviews
dirt prevention
The fabric is Polyester.
It is not lined, so it is not expected to be waterproof like Tarpaulins fabric.
The cover area covers the front and four sides of the bag. Due to its structure, the back of the bag can be covered only slightly.
It is a special product, so the fit to the bag is good. There is no worry that it will come off while driving.
Older types could be identified top and bottom by looking at the Logo, but the current product has no Logo printed on it, so it is necessary to check the position of the drainage hole.
The quality and texture is neither good nor bad.
View detail
Fits: Others Hepco & Becker Side case Explorer/Journey/Junior/Gobi
Securely mounted.
Firmly and Pannier can be worn.
However, I think the price is too high.
View detail
The product is good, but the accuracy is not good enough.
The product itself seems firmly and sturdy and gives a sense of security, but we had the following problems in installing it.
When installing the new machine, even the screw holes were painted, so it was necessary to make a tap.
・Quantity:Pair (for Left and Right) The holes in the Parts connecting the Holder of the Bracket were not aligned with the Screw holes in the Bracket and needed to be corrected.
The mounting holes of the parts to which the blinker is attached are small, and the rubber part of the blinker is deformed, so it was necessary to widen the holes with a file.
Wiring had to be extended because the Blinker would have to be moved.
I asked PRO to install it for me.
Since it is quite expensive, I was expecting a good degree of accuracy.
View detail
Fits: SUZUKI V-Strom 800 DE
I installed it.
[How is it used?
DL1000 V-STROM800DE Black I installed it in the
Quantity:Pair (for Left and Right) Side case of the
Was the one you received as per Image?
The black color matches the Motorcycle color.
Was the installation difficult?
Installation was easy even by myself, but there was a little hang (order? I had to make a large cut.) I was able to install it easily by myself, but a little bit of hang (order? fit?) was too much.
An assembly Instruction Manual is included, but there are no instructions.
If you only looked at the diagrams in order, you had to start over.
The completed mold must be imaged and installed.
How was your experience with it?
The tight fit between the Frame and Case on the Motorcycle is not good.
From the back, the Right Side looks good, but the Left Side is very tight.
I am using this Manufacturer's stuff for the first time,
I couldn't figure out how to attach Frame and Case since it is not mentioned.
The topCase is compatible with the topCase. If a large topCase is attached, the lid of the attached case will not open.
With 45LtopCase, the Limit lid and the lid opened.
[Included Parts:were they on?
The minimum amount of screws, nuts, and washers required for installation were included.
Washers are not marked with a distinction, so we had to combine them by looking at Screw size and drawings.
Maybe a little puzzle.
Tools are not included and must be prepared by yourself.
[Was there anything that disappointed you?
As I mentioned earlier, the Left Side is difficult to fit.
It is fixed with a fixing component after it is pushed sizzling into the Frame.
View detail
Fits: Others Carrying Exclusive Bracket "C-BOW" by model
More solid than I expected, but not as much capacity as I expected.
I knew this from the beginning, so it's not a problem, but the capacity is low. 。 The construction is more solid than expected and the waterproof performance seems to be good (although it has not been used in the rain yet).
I had been using the same Hepco Junior hard case and was very happy with it, but due to my advancing age, I wanted to reduce the weight of my car as much as possible, so I ended up with this soft pannier. 。 I am satisfied with the lightness of the product.
The design is quite good, and it is not unstable like ordinary sorting side bags, so it can be used with peace of mind.
View detail
Adequate functionality but difficult to install
The bag is attached to the bag by inserting the Velcro belt through the D-can originally sewn on the bag.
However, the belt is thicker than the D-can, making it difficult to install, even though it is an OEM product.
It is Stress because you have to remove the phone bag once to put the phone in and out.
The size is large enough to accommodate an iPhone 13 with a case, but not large enough for a larger phone.
View detail
Installation
Since it was replaced by a Fender Eliminator, installation was a problem:the bracket of the Fender Eliminator had to be modified, so a suitable tool would be required.
Normal fenders are easy to install.
View detail
Fits: BMW F650, BMW F650ST, APRILIA RS 660, KAWASAKI Z125, MOTOGUZZI V100 Mandello S, TRIUMPH Daytona 675, TRIUMPH Rocket III, TRIUMPH Rocket III Roadster, BMW G310GS, KAWASAKI Ninja 125, BMW G310GS, BMW G310R, KAWASAKI Ninja 250, KAWASAKI Z300, KAWASAKI Z125, TRIUMPH Tiger900 Rally Pro, TRIUMPH Tiger900GT, TRIUMPH Tiger900GT Pro, TRIUMPH Tiger955i, TRIUMPH Trident660
So bad
Mounted on Trident660
The refueling cap interferes with the bracket, making refueling impossible...
It's a shame because the Bag's Hold feel and easy installation was good...
View detail
It's convenient but not enough capacity?
I purchased this for a vehicle that cannot use the Magnet style Tank Bag.
By replacing the ring on the tank cap with a special one, you can connect with one touch.
The One-touch mechanism seems to be solid, so there seems to be no need to worry about it falling off.
The design of the case is also stylish and does not lose its shape.
The only thing that is a little disappointing is that the bottom is raised for the quick rock mechanism and not flat, so the load capacity is not as large as it looks.
Since this is a pricey product, I think you should carefully consider whether the capacity is sufficient for your intended use.
View detail
I'm disappointed.
It's a shame because you have to make a hole in the Tank Bag itself to use it.
Handling Instruction Manual was very difficult because there was no translation (please enter here).
View detail
Fits: YAMAHA XSR700 Xtribute, YAMAHA XSR700
It's easy to put on … but
I bought it to put the Hard case on, but when I put the Case on it, it hits the Blinker.
I ordered the A Touch Move Kit, sold separately.
I'm an overseas PartsManufacturer, so I guess that's about it.
View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Convenient Rack
Today's sports type motorbikes can be difficult to use a seat bag There is
It helps in such a situation
However, some manufacturers may not be able to get the fixed belts to fit, or the length may be too long It may require
Other than that, I have no real complaints, just not an affordable price, but it's convenient
View detail