Reviews
22. 2mm Handlebar necessities for installation
MT-09 has a Handlebar diameter of 28, 6 mm and Handlebar has few options, so purchase to install 22, 2 mm Handlebar
I am tremendously shining off AGRAS (Lol)
Installation was surprisingly troublesome and I could not turn on until I removed the Top Bridge
View detail
There is a lie in the manual ??
As expected it looks like AGRAS and its looks are also very good.
The Handle position also became a forward tilted posture similar to CB 1300, and the long distance Two became less tired easily.
Although it is installation, the distance with Cowl is Spit with 10 mm Spacer. Also, cars without ABS need to replace Brake hose.
In manuals there is no need to handle Throttle Wire, but it will interfere with Cowl even without Spacer.
Although troublesome work increases, the product itself is very satisfied!
View detail
Insurance when falling down
I also attached the Yamaha OEM's Side Slider, but purchasing as it is lonely that there is no Slider in the front one.
It is necessary to remove Bolt which fixes Engine during installation. I tried to install it myself, but I decided to lose Bolt so I asked for a go-around Motorcycle shop.
It cost 1,000 yen worth, but it can not be helped.
Insurance when it falls from past experience.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Painted to fit the body image.
I like the shape, but because the color was Silver, I painted Black to match the car body color.
I exchanged for other Manufacturer items, but eventually I am settled on this.
View detail
Does not it feel gloom if it is prepared?
At the time of falling experience in the past FFork bottom part of Damage unexpectedly got Large so if prepared it would be sad when I purchased it. For mounting Axle Shaft Penetrating temporarily disassembled DURACON part removed One Side and Axle Shaft just rebuild it through a bar (M6 Cap BoltSpec. ) Easy installation (About 30 seconds).
Personally like the place that looks tightened for Black. I do not want to take care as much as possible.
View detail
In case of emergency
Because the Starter cover is well overflowing, I purchased it because it was sometimes impossible to restart if falling down → being broken.
I feel satisfied with the feeling of Dress-up than I imagined when I installed it.
It is only looks that you will be satisfied, so you do not want to be as effective as this product.
View detail
Practical and Parenthesis nice ~
While choosing AGRAS to Guard the stone splash of Radiator etc. Stainless and AGRAS Logo stand out and Parenthesis is nice.
I am also solidly making it, it seems to firmly Guard me. Although care is Large strange (^_^;)
View detail
Dress-up effect is high
I tried purchasing for Dress-up and Motorcycle protection at falling.
Since it is not falling, I do not know the effect as Protector, but I am satisfied with the fact that the Dress-up effect is high due to the Race ish shape and vivid Blue color.
Also, although I have not tried it, I feel like I can lift it with VHook's STAND.
View detail
Measures against standstill
For me MT-07 was high in Seat high and I was worried about the feet, so I attached this part at the very beginning after car delivery.
Since installation is only removing Bolt fixing engine and changing it, even if you work slowly it completed in about 10 minutes.
Because it is with Logo, there is also a sense of luxury, I think that I have matched Design of MT-07.
I installed the Slider so I became easier mentally, but do not want to get indebted to Slider.
View detail
I expect to expect performance.
I was attracted to the appearance and purchased.
I was in stock in June but I came in middle of May.
The real thing looks cooler than the picture It was as I thought.
I also seem to be able to expect performance with firmness.
Well, I will drive to not demonstrate its performance.
View detail
Amulet
This time, I installed it myself a word Cowl drilling Large change. Manufacturer also felt kind if there was something like a paperboard.
But I think that it is safe to attach because the position of the installation is an effective place when standing gobble something.
Shopetc. Those who are asked to please some Cowl hole Gap please forgive me (Lol)
View detail
Well
O-ring uses OEM.
Installation was hard at first with the tool being hard.
Once removed, once again, next time,
I was also tightened by hand.
Is it a problem of accuracy, if the Screw Department is a bit
It may be scraped into the inside - - - Thinking
I am a little uneasy..
I like it and it looks like One point Accent.
View detail
Simple is well suited
I purchased Black with Logo.
Translation (Please enter here Instruction Manual, I think that installation does not have a problem with individual Level if care is taken with One Side each time using Torque wrench.
I do not want to take much care of Slider's original function, but it is a part that matches well with the car body without breaking the design of MT-07 while Simple at low price.
View detail
I feel better than OEM
【good point】
- The sense of unity with the car body increased during acceleration. At the time of OEM footpeg, I was curious that the seating position shifted before the slipple every time I got over the step on the road surface, but it was improved considerably. It seems that it was successful that the seating position of Seat also moved backwards as footpeg lowered backward and upward.
- Footpeg is hard to hit the calves.
【Imaichi points】
- Since the seated position is shifted backwards, the forward leaning posture becomes a bit tighter.
- Since footpeg is not Foldable, it hurts when hitting a leg.
- There is no assembly instruction manual. (There is a structural diagram of the part)
【Summary】
I feel that the texture is also very high, Position is also coming so I was glad to replace it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI KATANA, KAWASAKI ZX-25R, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI GLADIUS650400, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SV650S, SUZUKI SV400, SUZUKI SV1000S, SUZUKI GSX250R, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is functional
In doing ChainMaintenance, I was looking for Stand Hook.
I decided on this product on condition that there is trust, which is functional priority rather than appearance priority.
It is easy to install, and it is thought that V letter Hook will not interfere with Swingarm if you attach the included Color.
I will make the price as it is, but it looks pretty, but I am very happy.
View detail
AGRAS REARSETS GEN 2 HAYABUSA . VERY SIMPLE AND BEAUTIFUL DESIGN . I DID CHANGE OVER FOOTRESTS , TO LONGER LENGTH ITEMS AND FITTED OUT WITH ALL TITANIUM HARWARE . WOULD OF RATED THEM 5 STARS , BUT HAD TO PAY EXTRA TO BLACK ANNODIZE . WEBIKE HANDLED THIS
AGRAS REARSETS GEN 2 HAYABUSA . VERY SIMPLE AND BEAUTIFUL DESIGN . I DID CHANGE OVER FOOTRESTS , TO LONGER LENGTH ITEMS AND FITTED OUT WITH ALL TITANIUM HARWARE . WOULD OF RATED THEM 5 STARS , BUT HAD TO PAY EXTRA TO BLACK ANNODIZE . WEBIKE HANDLED THIS REQUEST FOR ME , AND CANNOT FAULT THE SERVICE FROM YOU GUYS . View detail
Attached for Circuit Debut
I installed it for Circuit Debut this summer.
The price is cheap compared to other products, but there is no cheesy feeling and the appearance is good.
However, compared with OEMBar End, it is lighter and I feel that the vibration transmitted to the Handlebar has increased. There is no problem because it is just not anxious.
Installation will be completed in about 15 minutes. OEM's Bar End is detachable with 12 mm Hex.
I do not want to know the protection performance of Lever Guard, but I thought it was for insurance only and wore it.
View detail
Fits: DUCATI ST4, DUCATI ST2, DUCATI MONSTER900, DUCATI 916, DUCATI 900SS, DUCATI 888, DUCATI 851
It looks nice
OEM is Gray 's PlasticCover, and I could not say that Parenthesis is good for flattery, but Refreshing and Parenthesis has improved.
Installation was also easy with Bolt-on.
View detail
It made it look better than radiator being naked! I'm getting a radiator side cover also. It would look better with this!
It made it look better than radiator being naked! I'm getting a radiator side cover also. It would look better with this! View detail
Fits: DUCATI Panigale , HONDA CB1100, HONDA CB1300 SF, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA NSF100, HONDA XR100MOTARD, HONDA APE 100 TypeD, HONDA APE 50, HONDA DAX, HONDA MONKEY, KAWASAKI ER-4n, KAWASAKI W800, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z900RS
luxury.
Previously I was installing the Other Company Product There is no high-class feeling
I did not like it at all
I found this and purchased it.
However, because I purchased 30 mm it did not suit NINJA 1000.
NINJA 1000 is 20 mm so make no mistake.
The first 30 mm is A friend riding the ZrX 1200 DAEG bought it for me.
Impression attached from NORMAL than the previous Other Company Product It looks better..
View detail