Reviews
Not as noticeable as one might think.
There is no change in fee rings before and after installation.
However, the rigidity of the Fork has definitely increased,
It is for Circuit.
I installed it with the look On Lee, but it is not as good as I thought it would be.
It was not noticeable.
I wish it were a little cheaper.
View detail
Tsukuba 2000
I felt that the front suspension was more solid, and I could feel the change from the Breaking to the Corner entrance. This is just my impression. I think it is worth a try. View detail
I installed the one for GSX125 on my NINJA150RR.
Material and design are very good. I feel that the operability is much more stable after the break-in from Brake.... I think it's just my opinion.... I will try to run with it and see how it goes........ View detail
I feel more than the Brushbo effect!
I thought it was basically a dress-up effect, but when I installed it and ran with it (In my opinion) I feel that the rigidity has been increased. I think that the stiffness of the wall has been increased. Rigidity Up I am running with the Image that I did. Recommendation. View detail
Improved rigidity
The front fork is soft, so I installed it on my car. I am satisfied that it is stronger against crosswinds, etc. View detail
Great construction! But expensive!
The size and clarity are well made, and the installation is no problem at all.
Also, I feel that the rigidity of the firmly has been strengthened and the flexibility of the corner ring has been lost. If you are a leisurely touring main, you may not need it so much.
View detail
Material:AluminumFork top bolt
The OEM top cap is shaped to collect rainwater &garbage, so I was considering purchasing an Initial Adjuster when I found this product. Silver anodized for a modest appearance. (I ended up stripping it anodized and hanging it buffing. lol) The first time I saw a new product, I was surprised to see it. I am happy with the inexpensive, rainwater&garbage free, and looks great.
O-rings are not included.
View detail
I used it with NSR50 Front fork installation on DAX.
When the front brake of DAX is changed to DISC, it is the same as the front brake of NSR50.
I used the front fork but the length is 40mm shorter than OEM.
I purchased this product, installed it, and assembled the Front area.
I use it conveniently because it can be used for Setting such as changing the amount of protrusion.
The finish is beautiful and strong enough to recommend it.
View detail
Improved rigidity
Front suspension itself is hard, but it's not stiff enough because it's upright.
There was a case that only the front part of the car slid before the rear part of the car slid due to the loss of ground contact.
I compromised with this because I think I could buy several inverted or Body with One-off.
In fact, I feel it's well worth the price.
View detail
sinkage
It reduces the sinking of the suspension, or should I say it reduces it, and increases the straight-line stability and the feeling of rising Cornering.
I don't think there is much difference between the two, so don't get your hopes up too high!
The texture is good, so the appearance is improved rather than the performance is improved.
View detail
I think there is a difference.
At first I installed it just for looks.
But when I installed it, I think it's doing a pretty good job.
I think it's easy to install, but I think it's better if you have Instruction Manual such as Bolt's Tightening Torque.
View detail
Oil leak
I installed it on my GSX250R
Anodized color can be changed to blue to match the body of the car
Accuracy and fitment are no problem, but..
After about half a year of use, I discovered that Oil had accumulated in the adjustment section of the Top
Tank and Cowl also had Reddish Oil on them
I wasn't making frequent adjustments, but when Fork was compressed more vigorously than Seal's ORing It was leaking out to
After disassembling, we found no damage or cracks in the ORing, so the accuracy of the ORing groove was inaccurate or the size It is unclear if the ORing was fitted with a different ORing that
I ended up switching to Posh's Adjuster and riding it; Posh shows no sign of leaking after two years There is no
View detail
Function is sufficient, Cospa evil
I bought it at the Sale price, but the original price is too high
I wanted it to be sold separately.
(Because we used Thrust bearing, because we used our own color)
I am satisfied with the function as Initial Adjuster
The adjustment width of Adjuster is 15 mm or more and it is enough
I wish it was a shape that could be adjusted Knob
I will adjust it with Coin driver
Get on board, ride 1G '= 36 mm (30% of Front forkStroke) Adjusted to
From here, I will shake Initial and go looking at the ride taste
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA APE TypeD, HONDA XR100MOTARD
The price is - - -
For extension of APEFork
Since the scale is waving, the protrusion amount can be visually confirmed
Add Punch to Initial Adjuster for grasping rotation speed
It is not that I made Large, but even though it is individually wrapped it is cut over Mountain etc. Attachment and cleaning before installation is essential
Anyway, if this price is high, I want a little more built-in
View detail
There is a possibility of trouble depending on the application
We extended this Fork for the previous term and used this product to change to the late stage that can protrude. The appearance was also beautifully beveled, there was a feeling of luxury.
I chose this Length to place the Handlebar Clamp position on the Top Bridge, but when I got a shared Rider on board the test ride, the symptoms of loosening Handlebar occurred. Because I did not occur on my test ride, I did not understand the cause at first, but Cap was loose and happening.
No matter how much the top bridge was tightened again, it did not resolve and it was solved, only the Right Side's Fork was solved by the method of exchanging it entirely with NSR mini's Fork, so One Side wasted. It is better to consider buying according to the intended use taking into consideration that there is a Rider that causes Trouble that Handlebar will move only when Clamping Handlebar to Cap part.
I will add that there is no problem unless you set Separate Handlebar Set to Cap.
Speaking of luxury, if you have a Screw hole in the Top part or if an Air breeder is attached, you will be able to use it more in terms of performance, so that you can easily add Oil and air pressure Cancellation of extension..
View detail
As expected
Purchase to increase the setting width of Ninja 400R.
I am satisfied with the result as expected.
○ Package Contents
- Body, exclusive Color pipe, Instruction Manual.
○ Attention on installation
- O-ring is not attached to the product, so you need to divert 0 Ring attached to OEMCap or purchase separately. I think that Oil will squirt as it is mounted.
- When screwing Body into Fork, Adjuster turns round and round together.
So please check firmly the number of revolutions of Adjuster after installation and re-set.
Other, quality seems very good. Although it is not in the photograph of Catalog, there is a decoration of a fashionable patch and there is a high class feeling.
View detail
The view is the best!
Changing the Initial of Rear suspension from the feeling of lack of Stroke at rising (Harder) Did. It was inequitable to change Rear alone, so we bought the Front so that we can adjust it Initially.
It was a lot of choices because of many choices, but with price, build, and comes with a dedicated Color you can adjust both directions Plus minus (Although it was unnecessary as a result) It was the best decisive factor.
* Those of other companies need Initial only for exchange, and there are many things that can not be set to Normal setting.
Exchange was done by floating FWheel in the following way. Put GEAR in 1st gear and place ConcreteBlock next to the rear wheel so that it does not move. Then hang the Belt on the Top Bridge and pull it up to float the FWheel (The photo shows what RWheel floated in the same way). * Loosen the Cap, the final tightening was done with both-wheel grounding. I think that Risk is a large method, so I think that it is better to obediently leave it to PRO.
Change Initial after replacement (Harder) By doing so, I am satisfied that various frustrations I felt were solved, but I also wanted Damper adjustment. Basically, it is ideal for Rear to replace Shock and Front to incorporate DamperKit, but if it is not possible to put Cost on it, is not it a good option. Also, rather than multiplying OEMOption's Cap thousands of dollars, Adjuster with the best adjustment is also recommended, with adjustment function.
View detail
The Agaras front stabiliser is a high quality product which fitted perfectly to my bike . It functions as it should keeping the front end tracking better over bumps in corners. The product is very well made and looks good on the bike. Comes complete wi
The Agaras front stabiliser is a high quality product which fitted perfectly to my bike . It functions as it should keeping the front end tracking better over bumps in corners. The product is very well made and looks good on the bike. Comes complete with all mounting hardware and is simple to install. View detail
Beautifully made product. It is a perfect fit on my bike had it helps to stablize the front forks on rough roads and agressive riding. I would highly recommend this percision made fork stablizer.
Beautifully made product. It is a perfect fit on my bike had it helps to stablize the front forks on rough roads and agressive riding. I would highly recommend this percision made fork stablizer. View detail
The Front Stubby for CB1100 is put on the market from several companies. It is the smartness of extraction processing that I chose the product of the AGRAS. In the stage which is using only honesty and a public road, rigidity does not say that the uphil
The Front Stubby for CB1100 is put on the market from several companies. It is the smartness of extraction processing that I chose the product of the AGRAS. In the stage which is using only honesty and a public road, rigidity does not say that the uphill riding taste changes very just because it attached the Stubby. But custom-made 感 does not return to whom, either. In the meaning said so, it purchased by appearance serious consideration this time. An Aluminum begins to shave delivered goods, and they are admiration full loads and it is carrying out dust. A wearing feeling is also perfect and the lightness of an Aluminum is also wonderful conjointly. I think that it is one article to which the custom-made heart is satisfied. View detail