Reviews
Not as noticeable as one might think.
There is no change in fee rings before and after installation.
However, the rigidity of the Fork has definitely increased,
It is for Circuit.
I installed it with the look On Lee, but it is not as good as I thought it would be.
It was not noticeable.
I wish it were a little cheaper.
View detail
For the price...
It contains only a simple assembly diagram.
The bracket of the brake switch was deformed. A pity...
Shift lot, but it's cheesy.
I think the Cut-out process in Aluminum is Beauty.
View detail
Oil leak
I installed it on my GSX250R
Anodized color can be changed to blue to match the body of the car
Accuracy and fitment are no problem, but..
After about half a year of use, I discovered that Oil had accumulated in the adjustment section of the Top
Tank and Cowl also had Reddish Oil on them
I wasn't making frequent adjustments, but when Fork was compressed more vigorously than Seal's ORing It was leaking out to
After disassembling, we found no damage or cracks in the ORing, so the accuracy of the ORing groove was inaccurate or the size It is unclear if the ORing was fitted with a different ORing that
I ended up switching to Posh's Adjuster and riding it; Posh shows no sign of leaking after two years There is no
View detail
Function is sufficient, Cospa evil
I bought it at the Sale price, but the original price is too high
I wanted it to be sold separately.
(Because we used Thrust bearing, because we used our own color)
I am satisfied with the function as Initial Adjuster
The adjustment width of Adjuster is 15 mm or more and it is enough
I wish it was a shape that could be adjusted Knob
I will adjust it with Coin driver
Get on board, ride 1G '= 36 mm (30% of Front forkStroke) Adjusted to
From here, I will shake Initial and go looking at the ride taste
View detail
- - - Bimmy
Originally this product was released in conformity with L2 ~ L6, and I was inquiring conformity with L7
I have contacted that I did Minor change for L7 and purchased it.
However - - -
When I looked at the product that I received, it was a bit different from product photo for L2 ~ L6.
To fix Front STD's Chain AdjusterStopperBolt - It was changed to use Nut.
As a result of the inquiry, the initial Spec. It is said that Adjuster part of Rear may be damaged,
It is not for the reason that it is for L7 Spec. It was a change..
This increases the effort to adjust honest chains.
Also, the mounting position of the Stand plate is inside, from the shape of Chain Adjuster
J-TRIP's "VPlate receiving for durability" Can not be used as it is.
I got the DURACON Plate. So I shaved that Plate..
I used Chain Adjuster and Endurance Plate of GILLES TOOLING at K5,
After examining it, I made it and lost it. - - -
Same etc. Although this product is LIGHTECH and this product, for L7 of LIGHTECH, Stand plate does not arrive and it is out of the candidate,
I chose this AGRAS.
To be honest, I did not go as many as I expected. I'm sorry - - -.
View detail
It looks good, the function is okay
Since it is normal STANDSpool, because it will break at the time of falling, it is possible to attach durable Hook which can be attached to Swingarm without processing and Slider can also be attached, so purchase.
It is a good point to choose how many colors your looks like.
Since it is contained kindly when you open it kindly comes up from the beginning, I think whether to loosen Bolt and Adjust function to check whether it is Smooth. I once rose and reassembled it.
It is just an Adjust function, but Quantity : Pair (for Left and Right) There is a difference in the movement a little, Right is loose and there is a play (Perhaps this is normal?) On the other hand Left was cramped or a bit nervous. Rose made it a little better, but it does not change Left is astringent.
As a disappointment point, it is troublesome to adjust.
OEM is easier and at least it can not be done like GILLES TOOLING a bit more easily ... Although it may be familiar, it seems that it is difficult to produce precision a bit.
Also, although it's like a durable hook is attached and you want to use it, you can not use J-TRIP durable STAND piece because it interferes with Adjuster.
This is a serious situation AGRAS
Mr. AGRAS (^ ^; I am thinking that J-TRIP's piece that is the most share in Japan does not fit in Japan.
Since it can not be helped, I attached a piece to the reverse side and handled countermeasures by cutting a corner of the STAND's gold tool a little with Grinder (Lol)
AGRAS was basically somewhat regrettable just because I thought that every part was basically considerably high but I thought that AGRAS was made exactly not only for it but also exactly
Well, since it has just started selling, it may be improved in the future
View detail
Fits: HONDA MONKEY, HONDA NSR80, HONDA NSR50
It purchased in order to divert NSR system Front axle part to KSR. KSR -- a pure Fork has about 665 mm in overall length, about 615 mm (except for Adjuster die length) in overall length of the second-half system Fork of NSR, and about about 50-mm diff
It purchased in order to divert NSR system Front axle part to KSR.
KSR -- a pure Fork has about 665 mm in overall length, about 615 mm (except for Adjuster die length) in overall length of the second-half system Fork of NSR, and about about 50-mm difference (the photograph left -- KSR110 -- pure -- the right -- NSF100 -- it is pure).
On condition that it was with the
Adjuster, when the extended Kit was looked for, the AGRAS (35 mm) and the KITACO (45 mm) were found (if it searches, it may be in others).
Whichever it used, it was insufficient for the Fork length of KSR, but since I was going to use it for KSR-2 (KSR-2 is pure and there is pushing out of about 14 mm), the AGRAS regarded me as exactly good and I bought an AGRAS.
Since die length is different fairly if a NSR system Fork is diverted to
KSR110, I consider that it is better to look for other extended Kits.
When it was the
Catalogue, the color of the Adjuster portion was a Silver, but actual goods were Golds.
Since a price increases no less than 1.5 times compared with the thing of the
KITACO, the direction of a KITACO is a Recommendation if interference of an Adjuster, a Handle, etc. does not seem to have a problem.
View detail