Reviews
The beauty is that no drilling is required.
I bought it just in case. The quality of the Bracket is high, and I would be happy if the price were lower. View detail
Easy installation with 8Millimeter long socket wrench
The car stalled at the start of the left turn from a stop, and although it lost its balance and held on, it was a bit of a slow start, and after the Adrenaline explosion, the car was easily lifted from the ground and various body checks were performed at a nearby parking lot. Damage was limited to a small scrape on the cowl and exhaust system and a fracture on the leftfootpeg, coupled with the effects of the AGRAS racing slider.
For now, Slider is going to be lightly adjusted and reused.
GSX1300R HAYABUSAOwners should definitely consider this Slider!
View detail
No exterior processing is very good!
Installation was done by RB at the store of purchase.
Looking at the manual, it seems that it is not a difficult process as long as the exterior can be removed beautifully.
When I checked the finished product, there was no problem because of the cushion material even if it was touched a little while there were individual differences, and the owner only has to show his/her technique not to be choked.
Well, I don't know about cospa, I don't know.
View detail
It was installed beautifully.
I bought it because I was afraid of standing up, and I mainly just want to remove the Cowl, but the installation was done by RB ….
I am happy that I was able to install it without any modification, but I wonder how much protection it actually provides. But I wonder how much it can actually protect me.
View detail
Good design and practicality
I had it installed when I took delivery of my car.
It has a sense of quality and solidity.
I think it is thick enough to protect the Case. I have not actually tipped it over, so I am just guessing.
I think the design is also good. I was very confused between YOSHIMURA and Red, but I could have chosen Red, but I had to wait for 3 weeks, so I chose Gold which was in stock.
The GSX1300R HAYABUSA is impossible to bank this far.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
As a Slider?
Purchased as Stand Hook.
The product does not look that large in the photo, but my first impression was that it was larger than I expected.
It is named Slider, but there is no expectation other than Stand Hook for GSX1300R HAYABUSA.
The key is that it is easy to use as a Stand Hook.
Used in Dynamoto's STAND. Solid.
View detail
unconcernedly
Sliders from other manufacturers are very typical, but this one is so subtle that I myself don't even notice that I have installed it.
Frame Sliders are installed for the sake of mental health, and there is nothing worse than having to deal with a nuisance.
So, I'm not making it to Ate, just to ease my mind.
View detail
I am satisfied with the ease of installation and the appearance of the product.
I am satisfied with the appearance and the Fit feeling when installed.
I have not fallen over, so I do not know the effect.
View detail
No need to drill holes in cowl
Largest Merit requires no drilling in cowl
Also, the design is beautiful and doesn't look too different.
I will put it on just in case.
I don't want to try as much as possible to see if it works.
View detail
Great
I am glad I put it on! I feel safe. View detail
If the price is low enough
It looks really cool. I hope more Reasonable products from other brands will be released in the future, like the Type 2 GSX1300R HAYABUSA. View detail
Acts as a Guard. Fade resistant
It is a Stand Hook of a fairly Large size.
The color purchased is Gold; it is a somewhat bright Gold color as shown in the product image and has not faded in the 4 years I have had it on. The weather resistance is quite high.
It functions well as a Stand Hook, and the large size makes it easy to hang.
It also functions as a guard in the event of a fall. In fact, it also works as a guard in the event of a large fall, and a large down type exhaust system was able to survive with only a small scratch.
I was afraid that the Swing Arm side of the support would bend, but the material itself is soft and the large size makes it firm and secure. "Spinning away." The Swing Arm side did not bend.
I used to use MORIWAKI's product, but the catch on the Swing Arm side bent even after a light fall (after that, I replaced the Swing Arm and started using this product).
I can recommend it because it stands out rather prominently due to its large size and color, and it is inexpensive as well.
View detail
It helped me right away.
The GSXR1000R 2022 was installed at the time of purchase of a new car, and the unfamiliar handling of the Separate handle caused it to fall over immediately upon delivery.
When back, STAND was caught by the foot and ba tan on the other side.
The Exhaust System and footpeg were scratched but Cowl, Mirror, Handlebar, etc. were intact.
I would give it 5 stars because it was suddenly useful (laughs).
Repair Parts is another good thing about this product.
View detail
Fallen cannibals
This part protects the engine in case of a fall, and I think it looks good as a parenthesis. View detail
Fallen cannibals
The price is double that of the same racing slider, but we chose this product because there is no need to drill holes in the curl, and because some people have had their frames bent when they fall over when directly attached to a frame, although this is a different type of car.
The product is easy to install, but it takes some skill to remove and install the curl.
View detail
Funnel Type, so Parenthesis is good!
I think the price is high for what it is, but I like the look of the Funnel Type!
It is easy to install., to One point!
Happy with the results!
View detail
Requires T30 Torque for installation
The texture is quintessential AGRAS, it's Beauty and especially effective when standing up (I just hope I don't have to take care of this Slider). The only thing to do is to remove the OEM TorqueT30 and put on the supplied Bolt. But it's still expensive… View detail
Fallen cannibals
There are various sliders available from various companies to protect the Pulsar Cover side of NINJA, but I decided to purchase AGRAS's slider because it looks Parenthesis and it was reasonably priced.
I will drive safely so as not to be indebted to this.
View detail
AGRASSlider
It is good for installation without Cowling's modification. View detail
It looks great?
We purchased it because we also wanted Accent for the front wheel of our Motorcycle.
To be honest, I put it on just for looks, but I am satisfied with the Large size, and I have added a cap to the gold POSH bolt for the M6 bolt for installation.
It is also a recommendation for those who want to add an "Accent" to their Motorcycle.
View detail