Reviews
ตุ๊กตาแฮนgorilla สวยงามเข้ารูป สามารถใส่กลับแฮนได้อย่างพอดี วัสดุเงางามสวยงาม มาพร้อมน้อตแผงคอใส่ได้อย่างพอดี View detail
Appearance will change.
I couldn't do it myself, so I used PitService for the installation.
OEM Casting Sense." I don't like to use the handlebar, but I don't want to drive aggressively, so I replaced only the handlebar. Rear Sets are already installed and the position can be ridden without any problem.
(Not in the product description, but drilling is required.
It was difficult to find the replacement image of only Handlebar with their own Initial Adjuster and Bar End on the Manufacturer's website.
View detail
Great texture
This product provides a 2cm forward and 10 degree downward droop. The aluminum cut-outs are much lighter than those of StockParts, and the front of the vehicle is lighter as well as visually lighter. The aluminum cut-outs are much lighter than those of StockParts, and the front end is lighter in appearance. However, this product is quite difficult to install.
First of all, this is a problem with the body, but the screw that holds the handlebar lock collar is incredibly difficult to remove. It is located in a strange place and cannot be turned with a normal wrench. The Instruction Manual for this product describes it as [Color] I actually ordered and tried to loosen the Screw, but it was completely toothless. The helix was tightened with a terrible, vicious force, and was also hardened with a Bond to lock it in place. I was eventually able to remove it from the underside using a long extension and a very thin box.
Next, since the handlebar is positioned 2 cm forward, the brake hose is not long enough, and an Extension Kit is included to solve this problem. As a result, Brake line air bleed is mandatory. In this regard, it is not considered an easy task for beginners.
Finally, this Handlebar made of solid Aluminum material has a Blinker and Kill switch Quantity:Pair (for Left and Right) The holes are not made to receive the non-slip protrusion attached to the parts of the "Punch". For this reason, it was necessary to align them with Punch and drill the holes for them with Drill.
I called AGRAS directly to inquire about this point, and they told me that they had drilled this hole when they developed the same et cetera products to be attached to Hayabusa et cetera motorcycles. However, they said that the position of the hole had to be slightly changed with each new version of the product, and that this is why the latest products are shipped without the hole. However, there is no mention of this in the instruction manual or in the advertisement. Considering that other parts are developed and produced very product-specific, I thought it should be clearly stated in the instruction manual that this point requires drilling in advance.
Overall, however, the product was satisfactory enough with the Large change Quality product.
View detail
I put it on my New Model GSX1300R HAYABUSA.
I bought it because the OEM Handlebar was too tight for full lock. The width, height, and length of the handlebar have increased by about 1cm, and the form has been improved by the increase in height and length. The full lock roll is easier and the handling is lighter.
I think this is the best product for those who don't want to change from OEM to Large, but want a little more.
View detail
Maximum satisfaction
The quality of the workmanship, the sense of ownership, the satisfaction, makes me smile every time I put the key in the keyhole. View detail
Improved texture by replacement from OEM
There was no dissatisfaction with OEM Bar End, but after seeing the same Bar End used for Postal CUB, it suddenly looks cheap, and exchange
I can't see much of a change, but it's become a one point custom that people can understand.
View detail
Nice Parenthesis. Solid Silver
[How is it used?
For STD Handlebar.
The Separate handle is still easier to ride than the Bar Bundle.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
The size is larger than I expected, but it has a good presence.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
You can feel the Brand AGRAS moderately and get satisfaction for a long time.
View detail
It's a good look.
I wanted to see the Lever Guard on and after a lot of searching I bought the AGRAS one which is a bit rugged and good looking. I love it, and it's a perfect fit for Quantity:I have 1 Set of 2pcs. If one of the Anodized paints discolors or peels off, I will send it out for repainting, while the other Quantity:Set.
The product includes the Guard End, GuardBracket, Bolts for the Guard End, Duracon's Bar End, a car-specific Adapter and M6 Bolts.
My car didn't fit, so I used the Guard End, GuardBracket and Bolts for the Guard End, I didn't like the Duracon Bar End, so I initially used another Bar End and now I'm using the Bar End mirror Bar End. I purchased an adapter for the M6 Bolts because the NORMAL one was compatible with the M6 and I purchased the M6 Bolts considering the length and installed them. I bought the M6 Bolt and installed it.
It's very easy to install, but if you've never removed the NORMAL Bar End, I'd suggest having the Shop remove it once, as the Bolt is quite tight. Also, if you don't use an Adapter for your model of car, it may lightly interfere with the Axel, and it may not come back on its own after you let go of the Axel, so it's a good idea to put in a thin Spacer.
View detail
good product
It weighs about half as much as the OEM.
I don't feel much vibration etc. due to the lighter weight.
The color is gold and the color of the front fork is perfect.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000
AGRAS indeed!
As expected of AGRAS The product is good, but the price is also very good
The Mirror and Blinker will be gone, so please drive on public roads with security parts I moved Mirror to Bar End and Blinker to Position I moved Mirror to Bar End and Blinker to Position
View detail
Looks great The OEMs are heavier in weight
I regretted that I chose gold for the color, because it looks like a small monk It is OK if you get used to it, and it stands out I guess The removal was already suffered a lot with the replacement of the rubber, so I was able to replace it immediately The original OEM parts are full of Wound due to the repetition of stalling It will not become a Balancer I am very satisfied with the change in appearance The texture is very good I am satisfied with it View detail
Excellent quality!
Hi you all, This product is of the highest quality and finish, its fits and works great. I would highly recommend this product to anyone who is in need of a good setup. Very Nice fitment with using honda nice forks. Good information about the item and shipment. Very fast production time even though it states a month it only took me two weeks. i highely recommend this item. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Outstanding Agras Kit
Wanted this Agras top triple to replace the terrible double Hayabusa triple clamp / control top plate setup . This certainly does that nicely , but I did not use the well crafted clipons included in the kit for this particular Busa ,so cannot comment on clearance etc . I would of gladly purchased a bottom triple clamp also if Agras actually made one , but this is unavailable . The entire Agras kit is beautifully machined , and once fitted with titanium fasteners , weighs in at under 650 grams . View detail
Light weight + Dress-up
I purchased it mainly for weight reduction, but it also becomes Dress-up.
Aluminum Bolt & Nut is used for parts where strength is not necessary, Titanium Bolt & Nut is used for parts where strength is necessary.
View detail
Is good
Spacer to 5mm Up and Same height as standard. Spacer is Quantity : 1pc. One by one. Either way I would like you to lower the price.
As a product, it is very good. Although it was 5 mm, the attitude of the ride changed pretty well, making driving easier. OEM Rubber Bush's feeling of guyaguna disappears and the rigidity increases. The vibration increased slightly, and the Mirror will be somewhat blurred at around 6 thousand rotations.
View detail
The best
Installation was completed immediately.
Installation is easy, only tightening.
Impression is quite different at Custom of One point. Price is best if it is a bit cheaper. Overall, I purchased it and I am satisfied with Large.
View detail
22. Mandatory for installation with 2 mm HANDLEBAR, luxurious making
Handlebar I'd like to wear by all means 22. Because it was a thing with 2 mm diameter, I purchased AGRAS's Handlebar Post.
【What made you decide the purchase?】
Handlebar I wanted to wear was 22. It was 2 mm in diameter and Meter Bracket was also attached. Because MT-09's exclusive Handlebar Post was real product only.
Also, since it was possible to Anodize other colors in Color custom order.
【How was it actually used?】
There is only total Cut-out and it looks luxurious.
I had a Color custom order at +3,000 yen and had it Black Anodized so it looked tightened again.
【Mounting was difficult?】
When removing the OEM Post, Nut on the key cylinder side could not be removed at all, so I brought it to the Motorcycle shop after all and asked for installation including the attachment and detachment of the Top Bridge.
It is because of the car body side making, so I can not do anything.
【Please tell me the installation point and hang】
Same as above
[Is there anything I was disappointed about?]
Meter Bracket is not a Type that is sandwiched between Clamp like Washer, I wanted to fix it to either Post upper or lower.
I want to make a little bit of Meter Bracket moving every time Handlebar is removed.
Also Bolt attached to Aluminum's Post was Material : I was concerned about Stainless Steel.
I am afraid of the corrosion of heterogeneous Gold genus so I applied a Thread compound when mating.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought that it would be easy to buy if it was a bit cheaper.
However, since texture is also high, Color custom order can also be done so I think that this is a reasonable price.
【Have you compared items?】
MT-09 exclusive use 22. Post which can fit 2mm Handlebar is real only and so we could not compare.
[Others]
It is a thing that is not necessary at all if it is OEM or an outside Taper Bar! If you want to wear a Type Handlebar that is not released in Taper Bar, I think that you can put it in the candidate.
View detail
Match the color to your favorite car.
It is a pretty huge Bar End. OEM's Black is also cool but I felt it was quite flashy to exchange. Since Red is in the color of my favorite car I matched with the feeling of paint and I liked it very much. The Dress-up effect is outstanding (^^)
As a function, exchange by yourself, Bre etc etc. There is no problem of the !!
View detail
22. 2mm Handlebar necessities for installation
MT-09 has a Handlebar diameter of 28, 6 mm and Handlebar has few options, so purchase to install 22, 2 mm Handlebar
I am tremendously shining off AGRAS (Lol)
Installation was surprisingly troublesome and I could not turn on until I removed the Top Bridge
View detail
Since it was stained with the crack, it changed. the Gun meta as a car body with same color! the Design of details, and weight and form -- an AGRAS is smart very too in which! attachment is possible only by 6 angle Wrench!
Since it was stained with the crack, it changed.
the Gun meta as a car body with same color! the Design of
details, and weight and form -- an AGRAS is smart very too in which!
attachment is possible only by 6 angle Wrench!
View detail