Reviews
The installation was a little Large weird!
I bought it because I like the way it looks.
I first replaced only the top bridge cover, but I wanted to replace the handlebar as well, so I later added the handlebar as well.
I'm very satisfied with the product!
The Bolt has a Screw Lock, so it's a little weird to remove the OEM first time.
Changing the Position makes it easier! but a slight change in position does not make it easier! (Lol) The brake hose interferes with the Meter area, although it was stated that it is OK to install.
View detail
It depends on how you view the fact that the Position does not change to Large width.
I couldn't find any photos of the Black Anodized Aluminum version on the ManufacturerHP, etc., so I'll expose them for your reference.
[Functional aspects.
At the grip end position, the bar is lowered by about 1 pc.
The hanging angle will make hang-off a little easier, but will it be worth the price?
To put it bluntly, I would like to lower the angle of attack and squeeze it even more.
Other than the angle, the NORMAL sturdy-looking Casting IronHandlebar is unusually heavy, so
There is a Merit that can be significantly lightened by changing to an Aluminum Handlebar.
Finish, color
The finish of the thing itself is good.
I chose Black Anodized Aluminum because I don't like the customized look.
If you don't know it, you may think it is STD Handlebar. It looks cool.
Anodized will fade more or less over time, so I think it will eventually color Gap.
Installation
I know many people are concerned about this, but it requires drilling. However, since it is aluminum, it is surprisingly easy.
Replacing the Universal iron bar handle is much more troublesome. The procedure is as follows
1) Remove the clutch side grips and clean the remaining bond with a scraper or parked grips.
2) Loosen the screws on the Left Switch Box and ClutchHolder.
3) Remove the Handlebar from the Top Bridge and pull out the ClutchHolder and Switch Box.
4) New handlebar is temporarily attached, and the switch box is positioned.
5) Measure the distance of the hole from the end side of the old Handlebar, drill a 5φ hole at the same distance, and install the Handlebar.
6) The Brake Side is basically the same work, but the Brake Side is easier because you don't have to remove the grip rubber.
Switch box is not something you touch all the time while driving, so you don't have to be nervous about the hole drilling position.
One thing to note about the work is that Gixxer has a strange structure with a non-split ClutchHolder, so the glue is glued to the Grip.
If there is any left, it will get stuck and be very hard to pull out. 1) I recommend cleaning it with Beauty instead of lying on the floor (self-discipline).
View detail
Blue or Silver…
While I understood that Silver was safe, I thought that it would match the body color and bought Blue. It is not bad, but it was good if it was a little darker Blue. It was Silver after all …. View detail
It is only for CBR25RR, so it is fixed firmly and the design is good!
[How is it used?
This is for fixing the cowl when the Mirror is removed during Circuit driving.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Installation is easy
However, the hexagonal size of the Hexagon Socket and Bolt of Mirror attached to the car body is 5mm, but the hexagonal size of the Hexagon Socket and Bolt for fixing Mirror Canceller is 4mm, so I have to carry two different size tools. I have to carry two different size tools.
How was your experience with it?
I am very happy with the design and the installation.
[Included Parts:were they on?
The product consists of a Mirror CancellerPlate and a Hexagon Socket and Bolt for fixing the Mirror CancellerPlate, but there is a Vinyl type attached to the screw to prevent the Hexagon Socket and Bolt from coming off the Plate. By attaching the Vinyl type to the Bolt part of the Hexagon Socket Bolt that holds the Mirror in place, you can prevent the Bolt from being lost when the Mirror is removed.
[Was there anything that disappointed you?
The size of Hexagon Socket and Bolt for fixing Mirror Canceller was 4mm.
I wish it was the same as the size 5mm of Hexagon Socket and Bolt for MirrorBody.
View detail
There is a sense of quality
To be honest, I can only tell the difference in appearance at Level, but compared to OEM, it gives a much higher quality feel. View detail
To One point custom
Large is almost the same as the OEM Bar End.
It is lighter than OEM, so vibration on the highway seems to have increased a bit.
The color matches with the front fork, so it's a one point custom recommendation!
View detail
Fits: SUZUKI SV650, SUZUKI GLADIUS650400, SUZUKI GSX250R, SUZUKI GSX-S125, SUZUKI GSX-R125
The design of Agras doesn't have to be said
I don't know about the front design and process, but the roughness on the back makes me feel that it's a nut with more than 200 +RMB. I don't think it should be like Agras. It's not the normal price of point exchange. It's definitely not recommended! View detail
cool
i like it , it very fitted with my MT.. stability control is good. and i wont feel back pain for long journey. and also good looking to. View detail
Shining self-satisfaction
Center nut is tasteless, I replaced it.
Clearly I am satisfied with my self.
I like the good compatibility with the gold parts that are colored in the places of R6.
View detail
To change the Handlebar position
【What made you decide the purchase?】
Strangely I felt dissatisfied with the Handle position of GSX-S which I did not care well with Upright and decided to exchange the Top bridge although it was slightly expensive.
The top bridge of AGRAS seemed to be able to move the clamp back and forth about 10 mm, and thought to lower Position forward by exchanging it with Handlebar.
【How was it actually used?】
The amount of movement was 10 mm, but at the moment I straddled, I was able to get a feeling different from usual.
Whether it could be naturally forwarded more than OEMPosition, I came to be more comfortable than anything else.
The GSX-S1000F is close to the screen position, interference can not be avoided depending on the Handle position, so it is necessary to exactly change the Position while securing the Clearance, but Driven's Carbon Handlebar, AGRAS's Top bridge (Advance by 10 mm) If it's Position barely there is Clearance.
Black ___ ___ ___ 1 ___ ___ 1 ___ ___ 0.
【Was it difficult to install? (Hard parts case)】
You can remove Handlebar, Stem, Fork and others related to Top bridge by removing the part, but if you remove Fork Clamp Bolt, Fork will be twisted and Top bridge will be difficult to remove, so it is better to apply Front's MaintenanceSTAND It seems easy.
Also, the Guard of Cable is fixed to the back of the top bridge, and it is a little troublesome work in case you have to remove them or do something.
Since the Clamp position of Fork top is the same as OEM, the protrusion amount does not change.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Just removing the Handlebar from the Clamp this time worked as it was without removing the Brake master and the Clutch lever, but they were going to rage Large a lot and it hindered work.
Because it may even create new scratches, it may be more efficient to work with the Handlebar completely removed if possible.
[Is there anything I was disappointed about?]
When this item is ordered, a different item has been sent due to incompetence of Manufacturer.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like not only Silver anodized but also Black Anodized as a normal Lineup.
【Have you compared items?】
None.
View detail
Manufacturer for unification
I liked the product made by AGRAS and bought it for unity..
Although the shape is also good, since it is Aluminum, it is lighter than OEM so it can not absorb vibration, and also because of the characteristic Anodized, I will also fade.
View detail
There is a lie in the manual ??
As expected it looks like AGRAS and its looks are also very good.
The Handle position also became a forward tilted posture similar to CB 1300, and the long distance Two became less tired easily.
Although it is installation, the distance with Cowl is Spit with 10 mm Spacer. Also, cars without ABS need to replace Brake hose.
In manuals there is no need to handle Throttle Wire, but it will interfere with Cowl even without Spacer.
Although troublesome work increases, the product itself is very satisfied!
View detail
Attached for Circuit Debut
I installed it for Circuit Debut this summer.
The price is cheap compared to other products, but there is no cheesy feeling and the appearance is good.
However, compared with OEMBar End, it is lighter and I feel that the vibration transmitted to the Handlebar has increased. There is no problem because it is just not anxious.
Installation will be completed in about 15 minutes. OEM's Bar End is detachable with 12 mm Hex.
I do not want to know the protection performance of Lever Guard, but I thought it was for insurance only and wore it.
View detail
Very high quality finishing product from Agras. This bar end is easy to install and reduce the vibration from the handle bar.
Very high quality finishing product from Agras. This bar end is easy to install and reduce the vibration from the handle bar. View detail
Since it is light as a Weight which purchased the Gold of a Handle brace and the same color, it is regrettable, but it is touch very much good for the Accent of the circumference of a Handle which was almost uninfluential to the run.
Since it is light as a Weight which purchased the Gold of a Handle brace and the same color, it is regrettable, but it is touch very much good for the Accent of the circumference of a Handle which was almost uninfluential to the run. View detail
Since the pure Bar end had deleted by the fall, it purchased to exchange. Although a weight saving is carried out slightly, and the car body of a Cowl of ours is as blue as whether it is a category of a Dress-up parts, since the Suspensi
Since the pure Bar end had deleted by the fall, it purchased to exchange.
Although a weight saving is carried out slightly, and the car body of a Cowl of ours is as blue as whether it is a category of a Dress-up parts, since the Suspension is a Gold, the
Bar end also chooses a Gold.
The
Matching thinks good kana [ Matching ] with it being individual.
View detail
It is the completion of work. The Bolt is attached and cling with a hezagonal wrench.
It is the completion of work. The Bolt is attached and cling with a hezagonal wrench. View detail
The Triple tree of the wish was purchased. Since that of ♪ Tough from which the Tp fastened two and 3 bundles became a conclusive factor in the Under is a Type although it wavered with the thing of the other company, an AGRAS is oneself liking most. The
The Triple tree of the wish was purchased.
Since that of ♪ Tough from which the Tp fastened two and 3 bundles became a conclusive factor in the Under is a Type although it wavered with the thing of the other company, an AGRAS is oneself liking most.
The first difference from the
NORMAL is lightness.
This can also make a Handle lock common, if cheap tricks are played after surprised ♪ just for a moment.
View detail
Considering [ which chose the Red according to other Partses ] a price, structure is beautiful, and pleasing at it.It is a saying pear if the neighborhood which took about two weeks to delivery of goods becomes early for a while after placing an order for
Considering [ which chose the Red according to other Partses ] a price, structure is beautiful, and pleasing at it.It is a saying pear if the neighborhood which took about two weeks to delivery of goods becomes early for a while after placing an order for whether color selection arranged. View detail
It purchased purely for the Dress-up up. those who are applied to this since it is a lump of an Aluminum as seen -- -- it will strike and shudder at the high quality. Although it was goods which are faultless in Design as themselves, since pur
It purchased purely for the Dress-up up.
those who are applied to this since it is a lump of an Aluminum as
seen --
-- it will strike and shudder at the high quality.
Although it was goods which are faultless in Design as themselves, since pure lay was also quite light, vibration of a Handle increased, and did not bear and go out, but became Stock going. [
]
The appearance should refer to the left of a photograph to
thickness.
That which has formed
right into the general-purpose Bar end was used widely after that using the Replacement bar end adapter (a photograph is a product made from ZETA) which each company is taking out.
-- Since it was too high, it is regrettable...
-- although the Impression of [ here ] is not carried out, please refer to it.
View detail