Reviews
easy to ride
It is recommended for people who are quite Handlebar Up Type and have difficulty leaning forward, etc.
However, the handlebar is unexpectedly narrowed down, so there may be some differences in taste.
View detail
Mounted on D-TRACKER-X
MX Type? Low is installed on D-TRACKER-X.
We considered Zeta and Renthal, but decided on this one because of the price.
Details below, but generally satisfied. If it bends, I may Repeat it.
[How is it used?
Used for city driving + day touring after installation.
Was the one you received as per Image?
Color:I bought Titanium and it looks more Silver-like than I expected.
Was the installation difficult?
This was my first handlebar replacement, but I don't think there was any particular difficulty dependent on the handlebar. I had to put it on and off several times for positioning and drilling, so it might have been easier if it had a memory like Zeta's.
How was your experience with it?
The height of the Position is not that different from the OEM in terms of experience. The width is obviously wider. I am wondering if I should cut it because it is hard to pass through in the city.
I feel that the vibration is reduced as advertised by Manufacturer. (Is there an effect of the Grip that was replaced at the same time?)
[Included Parts:were they on?
Brace was there from the beginning, but Bolt was loose, so I tightened it.
[Was there anything that disappointed you?
There is a seal around the throttle side, and I wondered if I should use it as it is. I thought that I should use it as it is, but it was obvious that the movement of the throttle tube became smoother after removing the seal, so I thought it was the right decision to remove it.
I thought it would be better if it was easier to peel off the glue as it left a residue after peeling off.
View detail
Anodized age fading…
This Handlebar is aluminum and lightweight.
Very good salt for touring, such as height, aperture, etc.
But due to the nature of Anodized, it will fade…
Red in particular becomes White-ish and seems to deteriorate at a faster rate.
I've been using it for many years and have no complaints about the Position, but it faded
I was in a tight Koku Pit in the
This is an exchange to Middle Bar at Fana TEC.
There was almost no change in Position and no discomfort at all from Hardy (laughs).
View detail
Used in FTR223
[How is it used?
Used on FTR223.
Applications:City driving, Touring, Circuit driving
Replacement from OEMHandlebar, used for about a year.
Was the one you received as per Image?
It's just like the image, there were a few different types but the height was just right.
Was the installation difficult?
There are many parts that need to be removed, such as the handlebar body, switches, throttle, etc. It will take some time, but if you have the enthusiasm to replace the handlebar, there will be no problem.
If you want to drill a hole for the switch attachment and trim the width of the handlebar, you will need a power tool and a thread saw, which will increase the difficulty.
There is no need to extend the Clutch Cable or Throttle Wire. They can be used as is. (Shorter than the OEMHandlebar, so it can be pimped.)
How was your experience with it?
Since I did not have a dirt driving application at that time, I wanted a RoadHandlebar that was narrower and lower in height, and this product was exactly that.
The position was comfortable and I didn't get tired while touring.
The Handlebar vibration was minimal, and the stiffness of the Handlebar was moderately good.
At the time, I didn't feel any inconvenience because I didn't have a charging port or a smartphone holder attached to the Handlebar, but if I do, I think the space will be a little insufficient.
I needed a wider handlebar for the Motard race on my FTR223, so I replaced it with an Extreme bar from the same manufacturer, which is no longer available.
The wide Handlebar is much easier to use in Dirt.
For those who don't feel comfortable with the wide OEM handlebar of the FTR223, Recommendation.
[Included Parts:were they on?
Handlebar Brace
[Was there anything that disappointed you?
None in particular
Point and hang of installation
Describe the hang of the switch box attachment, not the HandlebarBody.
Positioning for the Switch box (Anti-rotation) There is a projection for
If you want to use it for secure positioning, you need to drill a hole in the HandlebarBody. If you don't drill a hole in the handlebar body, it won't physically attach.
So, if you want to install the switch box without drilling holes, you can scrape off the protrusions on the switch box.
In that case, use the Switch boxMounting Bolt (Screw) It is important to tighten the screws as tightly as possible to prevent the switch box from rotating.
I've had to scrape off the protrusions in previous Handlebar replacements, but the Switch box spins slightly and I didn't feel any problems there.
In the case of hole drilling
Electric Drill
Drill (Φ5 or Φ6)
Jig for drilling
Cle 556 (substitute for cutting oil)
It is safe to work with the
If you do not have a drilling jig, you can use the
Hammer
Punch
Make an indentation in the hole with a punch to prevent the drill from escaping.
Then I concentrated on drilling.
View detail
It's a little different than I expected, but I'm glad I switched.
[How is it used?
The Z900 has a wide handlebar with a small aperture, which I felt was a little too far and low for my size.
Was the one you received as per Image?
I bought the Gun meta, but the color is Blueish and doesn't look like Gun meta.
Also, when I looked at it side by side with the OEM before installation, it didn't look much different and was a little different from my expectations.
Was the installation difficult?
There is nothing particularly difficult, but it is troublesome to replace the Grip, and it is necessary to open the hole to fit the protrusion of the Switch box's stopper with the Drill, so it may be a little Large strange if you do not have an electric Drill.
The cables and hoses were fine as OEM.
How was your experience with it?
The height and distance of the Handlebar did not change as much as I expected from the NORMAL, but the width has been narrowed to the Large width from the OEM and the aperture has been added, so the Grip position is closer to the body and easier to ride. Clearance with the Tank is not a problem even if it is cut to full lock.
The aluminum bar is lighter than the steel bar. I did not feel it.
In general, I'm happy with the bike and it's more fun to ride.
[Included Parts:were they on?
Material:Aluminum Brace bar is included, but I removed it because Z900 can't be installed because Meter unit is in the way.
[Was there anything that disappointed you?
The height and closeness of the Handlebar did not change much, but if I want more change, I will have to replace the Cable and Hose.
I'm very happy with this product.
View detail
A little more forward
It originally came with the Motorcycle, although I don't know the OEM so I can't compare Position is not bad If I wanted to, I would have preferred it a little closer to the front Also, I think the texture is good
I'm considering replacing it because of the recent noticeable Wound and Dullness In addition, when it came to my hand, there was no anti-vibration measures such as Weight in Handlebar I suffered from numbness in my hands for a while Without
View detail
Very good
i use it on my gsx1400 and the Handlebar width makes it easy to use it on big bikes It can be handled
This is the third time I've purchased this as the pull is set up to be good
View detail
It is a good Handlebar
Exchange as OEMHandlebar was bent.
The same shape as AX-1 OEM ? Since it is Size, install it without problems.
Handlebar Guard can also be installed, good color and texture.
View detail
I do not match it.
It was too wide..
I made a little cut at the edge, but it became imaichi like balance.
It was still worse that the original width was wide.
It is my selection mistake.
The product itself is solid.
However, as the finish of the surface was shiny paint, I felt a feeling of mildness.
View detail
Used with KSR 110
I used it by exchange of Handlebar of KSR 110.
The texture is very good.
I was riding this for a while for a while but I wanted to raise Position a bit more, so I tweaked it with Bar rise kit.
After that we will verify the durability of Anodized.
View detail
Good
Thinking that it is close in dimension to Handlebar I was looking for, purchased this time. Compared with Large hand maker property in terms of price, it is cheaper. As the withdrawal is Large, when attaching the Handlebar Guard you need to extend the mounting bracket. It is a difficult point to have few color choices, but there are circumstances of Large people there. View detail
Unhappy with OEMHandlebar
I replaced because I was dissatisfied with the texture and height of OEMHandlebar. Drilling is necessary and it takes time and effort, but as you can see, the height does not change much, but it has become easier to ride because there is a stop. Because it has Handlebar Brace there is also Custom feeling. It is a time-consuming task, but if you want to improve Position or change the atmosphere around Handlebar, it is Recommendation.
View detail
Since the Grip position was too high if normal, it exchanges. The degree was good inclining forward as a result of . If a Step is not simply changed into a Back step, either, it is some, but there is an odd feeling of hand and foot. The on
Since the Grip position was too high if normal, it exchanges.
The degree was good inclining forward as a result of
.
If a Step is not simply changed into a Back step, either, it is
some, but there is an odd feeling of hand and foot.
The one where Handle width is a little narrower is liking individually after
.
It is due to cut to
Konnai.
View detail
Although different colors was used till the other day, the same goods were again used by the fall. Handle width and height are moderate.
Although different colors was used till the other day, the same goods were again used by the fall.
Handle width and height are moderate.
View detail
Since it is broad since an authentic positive one is a Trucker handle, and it could not ride easily, it changed it. It became a SMART and management also became good. However, Wires Since it is [ Brake hose ] long, management worsens. I changed all.
Since it is broad since an authentic positive one is a Trucker handle, and it could not ride easily, it changed it. It became a SMART and management also became good. However, Wires Since it is [ Brake hose ] long, management worsens. I changed all. View detail
Since it did not go off-roading by WR-X, this Handle whose width is narrower than a NORMAL was used. By the Beauty, appearance also tended to vacate a hole, was actually attached, and width also became good exactly. What was necessary was just
Since it did not go off-roading by WR-X, this Handle whose width is narrower than a NORMAL was used.
By the Beauty,
appearance also tended to vacate a hole, was actually attached, and width also became good exactly.
What was necessary was just to have bought it from the beginning here, there being many small cracks or paint application separating easily, although there was much cheaper Handle.
View detail
It is lightweight and moderate height.
It is lightweight and moderate height. View detail
Cling to XR250. If a pure Handlebar and form are looking for what different [ seldom ], it be elaborate that it was a handy price. A thing [ the pure Handlebar / photograph / ]. Even if it actually uses, a feeling of a physical disord
Cling to XR250.
If a
pure Handlebar and form are looking for what different [ seldom ], it be elaborate that it was a handy price.
A thing [ the pure Handlebar / photograph /
].
Even if it actually uses, a feeling of a physical disorder is not at all.
We do not recommend it to those who expect size change conversely.
It is a Recommendation to the direction of liking [ near form ] pure to the last.
The Gold in which the
color also has an opinion.
since it
is what is conspicuous and goes into its field of view -- custom-made one -- in the bottom, admiration goes up (^_^;)
View detail
The Intermediate was stuck to the GRASS TRACKER BIGBOY. The place which extended the hand automatically has a Handle and operativity and a degree of comfort became markedly good. Durability is unsatisfactory, although the texture of the Aluminu
The Intermediate was stuck to the GRASS TRACKER BIGBOY.
The place which extended the hand automatically has a Handle and operativity and a degree of comfort became markedly good.
Durability is unsatisfactory, although the texture of the
Aluminum is also good and we can recommend it to you.
Although it was a fall with a
speed of about 20 km, the Handle has bent.
It is better to seldom expect, although the Brace bar for improving
rigidity is also attached.
View detail
[Webike Monitor] It has attached with the APE 100. The Gold was very beautiful and the circumference of a Handle became gay. Dramatically satisfied.
[Webike Monitor] It has attached with the
APE 100.
The
Gold was very beautiful and the circumference of a Handle became gay.
Dramatically satisfied.
View detail