Reviews
OEM-compatible
Compatible with OEM Parts for easy replacement View detail
One-off sensation, color it to your liking!
I reupholstered the Seat of the last model FI LITTLE CUB.
The Rubber Type is easy to work with and requires no tools, but if you want to make your own chain
I want to reupholster it well, so I chose this one.
Because LITTLE CUB of our house is all penned to Yellow color & Black, it is in the meaning of Coordinates.
Yellow Color Piping & Color:I decided to go with Emboss in Gray.
I was prepared for the delivery time as it was a special made-to-order item, but it arrived in about two weeks.
The instruction manual is written in the package and there is also a video guide.
The guidance was very detailed and reassuring.
1. Remove the Seat from the car body (NutQuantity of 10mm):2pc. (Set)
2. Remove the conventional Kaw (with Slotted screwdriver and Pliers)
3.The fixing of the reupholstering Seat is back and forth→Quantity:Pair (for Left and Right) and stop it with Tucker while pulling on the diagonal.
(You can also use HandTucker, but I used Air Tucker, 10mm wide and 6mm long.
The difficulty of reupholstering Seat in CUB is low.
It's hard to make a mistake the first time if you make a firm decision not to rush into a Wrinkle.
Also, when you remove the leather from the Normal seat, there is a Vinyl sheet sandwiched between the surface of the Sponge
Do not throw this away, use it as is. If the Vinyl is deteriorated or torn, you can use the Vinyl bag as
It would be better to cut or otherwise tuck it in.
Having Vinyl underneath will prevent rainwater from seeping into the Sponge through the seams when it gets wet, or seeping out through the seams when you sit on it.
The work took about 20 minutes to complete.
About color
I thought that BlackEmboss is not white, and I dared to use full EmbossColor!:I went with the Gray color, which I kind of regret.
The actual product is brighter than the Image in the product photo, so it looks a bit dirty.
I should have made a safe Black & Yellow color Piping...
There are some cheap SeatAssy available in Asia, but the Urethane foam is hard.
If you are OK with the STD Shape, you may want to reupholster it because the seating comfort will be different from the OEM.
View detail
It's a strange installation, but you can't go wrong
Seats can get dirty without you even knowing it, or they can be torn up by mischief.
If that's the case, enjoy the New Seat feeling with this product!
The good thing is that you can customize your product from the web.
It's hard to get a finished Image without a photo!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
The seat was torn, so as an emergency measure
The OEM Seat had been torn to pieces by years of deterioration, and we were looking to reupholster it I found this product
The procedure was easier than reupholstering because I just put it on top of the already existing Seat
You will need to hang on to the seat to install it, but if you remove the Seat from the motorcycle body, you will need to remove the seat from the motorcycle body It's not too much trouble if you put it on
The texture of the cover is not worth the price, there is no luxury feeling, but I am not looking for it in the CUB in the first place I'm happy with it
We'll see how it progresses in terms of durability, but the details are pretty solid from what I've put on it There is no atmosphere of easy tearing
View detail
Fits: HONDA BROAD 90 , HONDA CABINA90 , HONDA LEAD90 , HONDA JOKER90
Durability and other factors are yet to be determined
However, I've only driven it for about 4,000km in 20 years, so I may not have an answer for durability
So the rating is now normal
The texture etc... feels good, but I'm not sure that the OEMBelt didn't deteriorate after 20+ years of use Amazing
View detail
Installation is Large funny
The size is perfect so I think that installation is quite difficult unless you grab hang.
That finished product is a good product without Wrinkle.
View detail
Fits: SUZUKI Address V50 (2-stroke), SUZUKI Address V50 (2-stroke)
I can not say it's the best but it's a good feeling ...
The acquaintance's ADDRESS V 50 Seat cover
I changed it..
The Seat cover of GRONDEMENT is a domestic product but the price is affordable so I immediately decided to purchase it (^^) /
I used HandTucker and Cutter Knife for reloading.
The finish is pretty good and I am satisfied with the completion after the replacement (^u^)
View detail
It is the second purchase ♪
In the Seat replacement of the last time I used ALBA's BluePiping recliner Seat cover, but Piping's synthetic leather faded away without a year.
In the last time I chose BluePiping of GRONDEMENT.
Piping felt a little cheesy with Vinyl, but it lasted over a year and a half.
I wonder whether Piping's fading will be limited to some extent by any material.
Then, along with that, please select the Seat cover of GRONDEMENT again!
A little expensive, but EmbossSpec. I made it to
It is the third time for rewinding, and it ends 30 minutes or less ♪
EmbossSpec. It feels good to have Custom feeling ♪
View detail
Fits: YAMAHA Cygnus X [Taiwan 5th term]., YAMAHA Cygnus X [Taiwan 5th term].
Exchange once every 10,000 kilos
I do not understand driving system exchange of Scooter very well.
Even if you know what to replace, like Oil, it is a consumable item ....
If this All in One set, there is one replacement part and it is convenient. There is no need to think about combinations in particular.
View detail
Tight
It's tight, so if you can slowly cover it while stretching it entirely, it's Exactly. There seems to be some wrinkles, but it seems to get familiar with time. My fingers hurt while working. Once you bend it, it will not move so it's redone. View detail
Fits: SUZUKI ADDRESSV100 [ADDRESS] (AE11), SUZUKI ADDRESSV100 [ADDRESS] (AE11)
For V100 for Repair
I bought it. In fact I think OEM is the best, but there is no problem right now. It's kind of a light feeling. Just a bit "BALI" It is delicious that there is, it is OK.. View detail
It is Drive-belt exchange of V125. distance also exceeded 40,000 km, it came out of it, and the Belt was also a Crack Crack. It decided at domestic production and a price. die-length width -- it was the same in it being [ both ] pure. There is merely
It is Drive-belt exchange of V125. distance also exceeded 40,000 km, it came out of it, and the Belt was also a Crack Crack. It decided at domestic production and a price. die-length width -- it was the same in it being [ both ] pure. There is merely no mark of a direction of rotation. A Manufacturer stamp is well made into the oneself side generally. Since it was the touch same by every Manufacturer, it did so. The Grease up also of simultaneous exchange and the Clutch is carried out, they also attach a Weight roller, and a new article does not have sound, either and is good touch. It is especially smooth and there is also no problem. Or [ that it was the star 5 when there was a rotation mark ]? View detail
since it amounted to 15000 km, to serve also as a Maintenance, it still tames, since it is inside, it does not understand well, but structure is good here at purchase and domestic production -- it can do -- it is .After is expected from durability.
since it amounted to 15000 km, to serve also as a Maintenance, it still tames, since it is inside, it does not understand well, but structure is good here at purchase and domestic production -- it can do -- it is .After
is expected from durability.
View detail
Fits: SUZUKI SKYWAVE250 [SKYWAVE]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS].
[Webike Monitor] Since the Slide piece had only this Manufacturer external, he bought it. They are ordinarily good goods.
[Webike Monitor] Since the
Slide piece had only this Manufacturer external, he bought it.
They are ordinarily good goods.
View detail
Fits: HONDA DIO 4st AF62, HONDA DIO 4st AF68, HONDA TODAY AF61, HONDA TODAY AF67
Since it was running 8000 KM, it purchased to today AF61. Since it says that it is domestic, I think that durability can be trusted. Although it was some, it was wider than the pure thing. however, to attachment, it is satisfactory -- it is .
Since it was running 8000 KM, it purchased to today AF61.
Since it says that it is domestic, I think that durability can be trusted.
Although it was some, it was wider than the pure thing.
however, to attachment, it is satisfactory -- it is .
the run after attachment is also satisfactory at all -- it is .
Moreover, I think that the goods here may be sufficient as how which it is scrupulous and the belt for AF61 twists by Webike since it is the cheapest here.
View detail