Reviews
Fits: KAWASAKI KSR-1, KAWASAKI KSR-2
Securely sewn even for small motorcycles
[How is it used?
I got a used spare Seat for a KSR-II that I have owned for many years, but I was looking for a replacement fabric because the Seat Cover had cracks, probably due to poor storage conditions.
I was unable to find Seat fabric in the same color scheme as the last model, so I searched Webike and found it for sale at GRONDEMENT, so I purchased it.
How did you like it?
It is probably a higher quality fabric than OEM Product.
Color as a seat:Gray outer skin part is Dimple processed and gripped firmlyQuantity:Seat fabric is very easy to stretch, not a flimsy article of 1pc. fabric, but firmly Draping in front and back.
The price at the time of purchase was 6,820 yen, which was relatively expensive compared to NTB's Seat for SEROW250. Convincing Prices or perhaps I should say This is a low price for this quality." The product was so good that we could feel that it was a good product.
The fabric is thicker yet softer and may be more durable than the OEM Seat Cover.
How did it compare to other products?
To be honest, the only other product on the lineup other than GRONDEMENT's was a black fabric surface, and at this point, GRONDEMENT was the only choice for me.
[Points to note]
Since this product is three-dimensionally sewn for KSR, it is an easy job compared to Universal Product's Seat Cover. In fact, it may be more troublesome to remove the old Seat Cover, which is how easy it was to apply this product.
First, fix the front and rear of the Seat slightly loose, and then set the Quantity:Pair (for Left and Right) When pasting the "One Side", it should be pasted along the "Seat sponge" without wrinkles so that the "One Side" will not be pulled too much.
Other items that would be helpful
The deciding factor in the purchase
The shape is three-dimensionally sewn for KSR and the color scheme Pattern is the same as the final KSR-II model.
The price is never too high. High The price is exquisite, which cannot be said to be the case.
[How is it used?
The city driving is Main, but it has almost become Display these days as it is getting old and is stored in a Large cutout.
I would like to own it as long as possible.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. and Instruction Manual for simplified application is available in Quantity:Set
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Please continue Lineup as long as GRONDEMENT continues.
View detail
Fits: HONDA GIORNO CREA , HONDA GYRO X Late model (TD01-2100001-) Late model, HONDA GYRO CANOPY (TC50-P|V|Y|2|3|4), HONDA giro up (tb50-y) later model, HONDA giro up (tb50-4) later model, HONDA LIVE DIO-ZX YB, HONDA LIVE DIO-ZX YC, HONDA LIVE DIO-ZX YD, HONDA LIVE DIO-ZX 3J, HONDA LIVE DIO-ZX 5J
very good belt for dio 35 zx
very cool belt for the price, I'm happy with the purchase,
my moped accelerates very well and the top speed has increased
I advise you to buy
-------------------------------------------------- -------- A very cool belt for the price, I am pleased with the purchase, my moped accelerates very well, and the maximum speed increased I Advise You to Buy Powered by Google Translator
View detail
What is JAPAN Kek,.
Too big. It's too loose and loose and not at all comfortable. There is a fold over at the bottom so there is too much left over that you can't pull it all the way out. This is unusable. View detail
OEM-compatible
Compatible with OEM Parts for easy replacement View detail
original
I bought it because I remember the combination of black body and red seat of CBR400F and NS250F in 1980's. It has changed to an impactful and novel image. I am satisfied with it. View detail
Fits: SUZUKI ADDRESS V100 [ADDRESS] CE11A, SUZUKI ADDRESS V100 [ADDRESS] CE13A, SUZUKI ADDRESS V100 [ADDRESS] CE11A, SUZUKI ADDRESS V100 [ADDRESS] CE13A
Very nice sport kit
everything is super
I liked everything, I will order more
dynamics was added to the scooter, the maximum speed increased ------------------------------------ ---------------- Everything is super I liked everything, I will order more The dynamics added to the scooter, the maximum speed increased Powered by Google Translator
View detail
Fits: HONDA SPACY125 [SPACEY], SUZUKI ADDRESSV125 [ADDRESS] g, HONDA SPACY125 [SPACEY], SUZUKI ADDRESSV125 [ADDRESS] g
Rumble 20x15 16 gram rollerblades
I have a 2022 honda adv 150 US version that came with 20 gram rollers stock. I settled with 16 grams as it fits my riding style of descent take off without sacrificing top end. View detail
Fits: HONDA SPACY125 [SPACEY], SUZUKI ADDRESSV125 [ADDRESS] g, HONDA SPACY125 [SPACEY], SUZUKI ADDRESSV125 [ADDRESS] g
16 grams
Bought these cause of the quality and price. Shipped super fast from japan. Installed it on my 2022 honda adv and it made the pick up quicker. View detail
10 days to arrive
Purchased as a protective cover for a new seat.
Was the one you received as per Image?
It was of higher quality than I had imagined.
[How did you feel about the Fit?
Is it made in Limit or might it need a hang to cover it?
Thanks to that, Seat closes Smoothly.
Please judge the extra skin from the picture.
How was your experience with it?
No different than OEMSeat.
[Was there anything that disappointed you?
I thought it would be a cheap Cover made of thin Sponge and covered with synthetic leather that would make it hard to close the Seat. I thought it would be difficult to close the Seat, so I was disappointed in a good way.
How did it compare to other products?
I like the fact that it's only a synthetic leather Seat.
The others had thin sponges or something in them, which changed the seating comfort a lot, and
I had some difficulty closing Seat with Oversized.
The deciding factor in the purchase
It was a domestic product.
【Included Parts:presence or absence】.
None
[Notes]
I had 10 days to get it in my hands.
Are Minor car models made-to-order?
[Opinions and requests to Manufacturer
Thank you for handling such an old model as AF24TACT!
Very good product!
Durability is tested here w
View detail
Uk 110
Great deal for services and spares, there is no Suzuki dealer in the town we're I live so this is great I hope this helps it has everything you need and more View detail
Uk 110
I just written a review for this in another part of this site, this kit is the best value I have found as there is no Suzuki dealer near me hope that helps View detail
Color change
The surface of the off-road vehicle was easily wrinkled at the curve that rises from the buttocks to the top of the tank, and I managed to stretch it in front of the warm air heater while sweating and mobilizing both hands and feet.
There is some Wrinkle, but it is good.
View detail
GRONDEMENT JAPAN Drive V Belt STD Type
Purchased this belt when replacing the belt on my ADDRESS V100. I decided to use GRONDEMENT's V Belt this time because it is made in Japan, the price, and the availability, etc.
The replacement itself should be no problem for those familiar with Scooter maintenance.
I will verify the durability etc. from now on, but after the replacement, the test run was smooth at the start and acceleration etc. were no problem.
New Belt needs to be broken in. Do not open the throttle to full throttle immediately after replacement, but drive gently until you have covered a distance of 50 to 100 kilometers.
View detail
Fits: HONDA ZOOMER [Zoomer] AF58, HONDA ZOOMER [Zoomer] AF58
I call it the thickness of appearance and think that a feeling of weight is an existing muffler. If it is four strikes truly in the sound of a heavy low rather than calling it loud sound. Good point thickness is pleasing above all. Since there
I call it the thickness of appearance and think that a feeling of weight is an existing muffler.
If it is four strikes truly in the sound of a heavy low rather than calling it loud sound.
Good point thickness is pleasing above all.
Since there is also no contact with the road surface in a curve although the long wheel base is carried out, management of an exhaust pipe is safe.
If OK since the clearance between a hose and an exhaust pipe also has those [ enough ] who consider clear-ization of a radiator hose.
He is also KEIFAKU and he plans to make it SUKESUKE.
a bad point -- especially, nothing.
In the case of muffler exchange, the set of a main jet also carries out the recommend of the purchase simultaneously.
Since the filter is also changed, naturally he is required.
It is also one of the pleasure to issue setting by oneself.
View detail
Fits: YAMAHA Cygnus X125SR, YAMAHA Bewith125, YAMAHA BWS125, YAMAHA CYGNUS X125SR
You want to do Cancellation, but you're deliberately making it difficult to understand how to do it, aren't you? Huh?
I just want to cancel the cancellation. You son of a bitch. View detail
Safe domestic production
I expect durability because it is made in Japan. I'll use this again next time. View detail
One-off sensation, color it to your liking!
I reupholstered the Seat of the last model FI LITTLE CUB.
The Rubber Type is easy to work with and requires no tools, but if you want to make your own chain
I want to reupholster it well, so I chose this one.
Because LITTLE CUB of our house is all penned to Yellow color & Black, it is in the meaning of Coordinates.
Yellow Color Piping & Color:I decided to go with Emboss in Gray.
I was prepared for the delivery time as it was a special made-to-order item, but it arrived in about two weeks.
The instruction manual is written in the package and there is also a video guide.
The guidance was very detailed and reassuring.
1. Remove the Seat from the car body (NutQuantity of 10mm):2pc. (Set)
2. Remove the conventional Kaw (with Slotted screwdriver and Pliers)
3.The fixing of the reupholstering Seat is back and forth→Quantity:Pair (for Left and Right) and stop it with Tucker while pulling on the diagonal.
(You can also use HandTucker, but I used Air Tucker, 10mm wide and 6mm long.
The difficulty of reupholstering Seat in CUB is low.
It's hard to make a mistake the first time if you make a firm decision not to rush into a Wrinkle.
Also, when you remove the leather from the Normal seat, there is a Vinyl sheet sandwiched between the surface of the Sponge
Do not throw this away, use it as is. If the Vinyl is deteriorated or torn, you can use the Vinyl bag as
It would be better to cut or otherwise tuck it in.
Having Vinyl underneath will prevent rainwater from seeping into the Sponge through the seams when it gets wet, or seeping out through the seams when you sit on it.
The work took about 20 minutes to complete.
About color
I thought that BlackEmboss is not white, and I dared to use full EmbossColor!:I went with the Gray color, which I kind of regret.
The actual product is brighter than the Image in the product photo, so it looks a bit dirty.
I should have made a safe Black & Yellow color Piping...
There are some cheap SeatAssy available in Asia, but the Urethane foam is hard.
If you are OK with the STD Shape, you may want to reupholster it because the seating comfort will be different from the OEM.
View detail
It's a strange installation, but you can't go wrong
Seats can get dirty without you even knowing it, or they can be torn up by mischief.
If that's the case, enjoy the New Seat feeling with this product!
The good thing is that you can customize your product from the web.
It's hard to get a finished Image without a photo!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
The seat was torn, so as an emergency measure
The OEM Seat had been torn to pieces by years of deterioration, and we were looking to reupholster it I found this product
The procedure was easier than reupholstering because I just put it on top of the already existing Seat
You will need to hang on to the seat to install it, but if you remove the Seat from the motorcycle body, you will need to remove the seat from the motorcycle body It's not too much trouble if you put it on
The texture of the cover is not worth the price, there is no luxury feeling, but I am not looking for it in the CUB in the first place I'm happy with it
We'll see how it progresses in terms of durability, but the details are pretty solid from what I've put on it There is no atmosphere of easy tearing
View detail
Fits: YAMAHA AXIS50 [AXIS] [3VP]., YAMAHA JOG [JOG] [3KJ], YAMAHA JOG [JOG] [3YJ], YAMAHA JOG90 [JOG] [3WF]., YAMAHA VINO [5AU]., YAMAHA Super JOG-Z [JOG] [3YK]., YAMAHA Super JOG-ZR [JOG] [3YK]., YAMAHA GEAR [GEAR] 4KN, YAMAHA GEAR [GEAR] UA03J, YAMAHA JOG [JOG] APRIO 4LV, YAMAHA JOG [JOG] APRIO 4JP, YAMAHA AXIS50 [AXIS] [3VP]., YAMAHA JOG [JOG] [3KJ], YAMAHA JOG [JOG] [3YJ], YAMAHA JOG90 [JOG] [3WF]., YAMAHA VINO [5AU]., YAMAHA Super JOG-Z [JOG] [3YK]., YAMAHA Super JOG-ZR [JOG] [3YK]., YAMAHA GEAR [GEAR] 4KN, YAMAHA GEAR [GEAR] UA03J
Compatible with OEM
It was used on a Yamaha 2-stroke ScooterHorizontal Type vehicle
When the Pulley is removed, the Slide Piece comes off easily from the Ramp Plate If it is past its useful life
I bought this Slide Piece, which is less expensive, although the OEM is safe to replace it
I don't know how durable they are, as I just installed them, but I had to put a lot of pressure on them to get them on I think you can expect it
I'd like to report back to you after the fact how long it will last
View detail