Reviews
Fits: Others microS, Others RhombusS, Others Bullet Atto
Kellerman OEM Product
Since Kellerman's Blinker is small, I thought it would be better to put it out at least a little bit.
I plan to install another one and take it outside when I add a Bikini cowl or something in the future.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Kellerman OEM Product
Purchased to install Kellerman's Blinker.
I was able to install it without any problems.
View detail
Not as bright as the Atto 3 in 1
I opted for the vertical mount/tinted Attos to place on top of my rear fender. These are NOT as bright as the non tinted 3 in 1 Attos. The photos I've attached doesn't really show this, you'll have to take my word for it. If I had the option, I would have chosen non tinted version. Don't get me wrong, these are still very bright for their tiny size. View detail
Wiring
Wiring is very thin. If you work carefully, there is no problem, but you should not overdo it. View detail
Small but bright!
I've been curious about these Blinkers since I took delivery of my Dyna street Bob.
Both Rear and Front had a sense of existence and were in the way, so I found this Blinker that I saw in an article sometime ago.
Is it a Japanese Vehicle Inspection Correspondence? There were many points that I was concerned about, but I was surprised when I put it on.
It was well-lit and many people were passing through the car inspection.
It was not easy to install because of the drilling of the mounting position, but I was 100 points satisfied after the installation.
I'm glad I bought it
View detail
If the body and the screw part are ball joint, it is full marks.
The SS series Full Cowl Motorcycle is very difficult to find the right place to install it when considering the vehicle inspection (position, visibility, etc.). Even though the body is small and stylish, I didn't want to use unattractive brackets or adapters. The Normal blinker mirror which is already hard to see and is in the way was made into the Bar end mirror, and the KIJIMALED Blinker was made into the OEMMirror mounting hole.:It is the 959 Panigale that I had set up (I rejected the thin blinker made overseas by NRC because it doesn't pass the inspection and the visibility is bad), but I still felt dissatisfied with the shape and the largeness of the blinker and challenged the direct mounting of the Cowl of Kellerman! There is no flat surface that can be installed facing straight ahead in the range that conforms to the vehicle inspection.
So I decided to use the bolt hole (5mm diameter) at the junction of the upper cowl and the side cowl, but since the length of the bolt part of the Blinker Body is not enough, I had the 15mm extension adapter of the Option processed and somehow managed to install it. So I got the optional 15mm extension adapter and installed it somehow. It protrudes a little from the cowl and faces inward a little, but it seems to be no problem for visibility. For the time being, I will ride with this for a while, and if I find a better way or position, I will change it. Well, it's something that no one but the owner will know unless you tell them, but that's the nature of custom lovers.
When the Blinker became small and stylish, I wanted to change the Bar end mirror to something a little more small.
I think that the installation is relatively easy because there are various mounting adapters with the option. I think it is a product that can be recommended.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Good accuracy and texture. It was very useful.
I wanted to mount Barrett's Atoe directly on Cowl, but the length of the screw part was not long enough and I gave up. So I used this Adapter by shaving off the black part and extending the screw length by 5mm.
This is a great product and I am very happy with it. If there is such a thing - it is a product that can reach the itch of the User. In my case, I used it as a processing Base, but when it comes to make from scratch, I will give up.
I wasn't going to use it at first either, but I thought maybe it would be nice to have, so I bought it at the same time as the BlinkerBody.
It's not an expensive part, so if you don't plan to install Barrett Ato, you might as well buy it.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Good accuracy and texture. It was very useful.
I wanted to mount Barrett's Atoe directly on Cowl, but the length of Screw part was not long enough, so I modified the Screw part of this Adapter (extended the Screw mountain by 5mm to the black part) and used it.
It is indeed a dedicated Option part. There is no sense of discomfort when connected. If only there was something like this! I became the processing Base, but if I were to make it from scratch, I would have given up. If you use it, you will feel the gratitude of many times of the price.
At first I wasn't going to use it either, but I thought it might be nice to have, so I bought it at the same time as the BlinkerBody.
View detail
It's called the world's smallest blinker, so it's a pretty small blinker!
The world's smallest blinker, and it complies with vehicle inspections (EMark) So, it's a pretty small piece of work, and it's very high in light!
It's installed and looks Refreshingly different
The construction is also solid with the Aluminum Body
View detail