Reviews
Fits: Others microS, Others RhombusS, Others Bullet Atto
Kellerman OEM Product
Since Kellerman's Blinker is small, I thought it would be better to put it out at least a little bit.
I plan to install another one and take it outside when I add a Bikini cowl or something in the future.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Kellerman OEM Product
Purchased to install Kellerman's Blinker.
I was able to install it without any problems.
View detail
Fits: Others
Installed on a MONKEY125!
Installed on a MONKEY125!
Refreshing night visibility improvement and Rear area! ^_^
Since we had a hard time with our own Bracket and Wiring for installation, we recommend that you ask someone who is familiar with Custom to help you.
View detail
Fits: HARLEY-DAVIDSON
Not available for XL1200C SPORTSTER 1200.
Not available for XL1200C SPORTSTER 1200.
The Blinker itself can be installed, but the XL1200C SPORTSTER 1200 is a Quantity:Pair (for Left and Right) The position of the Blinker is also different from that of the Mirror in the Quantity:Pair (for Left and Right) Asymmetry.
If you are a Kellerman, you want to make it look and feel Large.
View detail
indicator
Blinker It's good. It is bright. And it's expensive. View detail
Kellerman
Kellerman Nice but expensive Bright but expensive View detail
Not as bright as the Atto 3 in 1
I opted for the vertical mount/tinted Attos to place on top of my rear fender. These are NOT as bright as the non tinted 3 in 1 Attos. The photos I've attached doesn't really show this, you'll have to take my word for it. If I had the option, I would have chosen non tinted version. Don't get me wrong, these are still very bright for their tiny size. View detail
Fits: Others RhombusS, Others Bullet Atto, Others microS
Does the job for me
I bought these to fit Kellerman Atto front blinkers and rear brake light on my JB03 Monkey 125 and they work a treat. I only wish these came inside the box of Attos. View detail
Smallest!
Wiring is quite thin and makes me uneasy, but I was able to install it without any problems.
I used to extend it with an Extension (sold separately).
It is so Compact that it makes me wonder if oncoming traffic is even aware of the Blinker.
I like the design, but to be honest, it made me uneasy, so I put it back.
View detail
Wiring
Wiring is very thin. If you work carefully, there is no problem, but you should not overdo it. View detail
To make the Blinker less noticeable
From the moment you decide to buy a new Motorcycle, before you decide on a model.
I was thinking of installing this Blinker.
I wanted the lights to be as small or bright as possible.
I found this Blinker on Harley's Custom video and was told that it was vehicle inspection compliant.
Without hesitation, I decided to install it on my next Motorcycle.
The one attached to the Front is, of course, the one with Blinker function only.
The 2021 RnineT has a Blinker that is also LED.
The person in charge of the Dealer said it was a waste of time.
And where to install it.
Shall I put it on with Bracket on the Front fork?"
Shall I put it under Lever in Handlebar?"
I've wondered about a lot of things.
For now, we installed it in the safe location where the Blinker was originally located.
Lens color is [Color] I'm wearing Clear's.
In fact, if it also serves as a Blackout, Lens color is [Color] Smoke would have been better, though.
Lens color. [Color] I missed that there was also a Smoke one.
However, it is small enough that it is not noticeable at all, so I am fully satisfied.
Rear was also replaced, but Rear has a control light function.
It is a bit expensive, but satisfying enough.
View detail
Fits: HONDA CBR1000RR Fireblade, HONDA CRF1000L Africa Twin
Clean flowing Blinker
CBR1000RR (sc77) This is a must-see for those who have installed a sequential blinker on their
I tried various resistors and other things, but finally arrived at this product.
The Blinker now flows beautifully.
View detail
Small, yet easy to see
It is very small, but the light intensity is sufficient and the visibility is good.
The quality of the product is the worst (it breaks within six months), and the distributor is very reluctant to reject the product despite the failure of the blinker, an important safety component for public road driving. I hope they will do more.
View detail
Even though it's extremely small, it's a blast of light. No wonder this is so popular.
The reason I purchased and installed the
? My Motorcycle (JC92 GROM) Tanax Side bag GT installed on
Bag's fit feeling is good, but it seems to be out of security standard because of the visibility from diagonally behind.
? We have to do something.
? to the existing RWIN ca. Expansion. So, if I install NumberMount Bracket's LEDWINCA, it will meet the safety standard.
? Okay, let's do it.
So I installed it.
I had a lot of trouble installing the product in question, but I am now able to return it to the Motorcycle and have added the Large variant.
Just…Considering that I'll eventually be carrying RCarrier and Top case, Bullet Atto DF (including all tail lights, brake lights and direction indicator lights) I think that it was perfect in the safety side if I had made it to
Well, I was able to bring it back to the present, so I have no complaints.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
For compatibility with UniversalLicense Plate Holder.
I bought this to combine Bullet Atto with KIJIMA Bracket.
The joint surface is Ribbed to prevent slippage and is a good product.
View detail
I knew it, Kellerman.
It looks neat and the light level is fine. 。 There are various parts for installation, so you can put it anywhere you want. 。 I've become a high flasher, but I think I'll leave it as is for now... View detail
Fits: Others microRhombus/micro1000
BlinkerBody is expensive, so it's great that Repair Parts is affordable!
The Kellerman MicroSeries is honestly cool, and the vibration isolation with RubberBolt is sturdy and well thought out, but...
If you accidentally tighten this anti-vibration with RubberArm with the included flange nut too tightly, it will not come off without destroying it when you remove it.
Destroyed.
We recommend you to replace the Nut with a Nylon resin Nut so that you don't cry when it doesn't come off.
View detail
Small but bright!
I've been curious about these Blinkers since I took delivery of my Dyna street Bob.
Both Rear and Front had a sense of existence and were in the way, so I found this Blinker that I saw in an article sometime ago.
Is it a Japanese Vehicle Inspection Correspondence? There were many points that I was concerned about, but I was surprised when I put it on.
It was well-lit and many people were passing through the car inspection.
It was not easy to install because of the drilling of the mounting position, but I was 100 points satisfied after the installation.
I'm glad I bought it
View detail
Fits: Others
dazzlingly bright
I was interested in it, so I bought it.
It's a good price for a single tablet, so I was rather worried.
I'm using KIJIMA's NanoSeries blinker.
As for the brightness, I think KIJIMA is a little brighter.
But at night, when a motorcycle with a Kellerman attached to it is waiting at a traffic light in front of you, you can't see it.
It's so bright that I don't like it.
When I installed the KIJIMA, I had a hard time because the wiring was too thin.
Kellerman had some thickness and didn't have any difficulty.
Where do you put it, in terms of size? It's like...
When you light it up, it makes a strong statement.
If you're wondering what kind of brightness you need, don't hesitate.
I hope you will purchase it.
View detail
If the body and the screw part are ball joint, it is full marks.
The SS series Full Cowl Motorcycle is very difficult to find the right place to install it when considering the vehicle inspection (position, visibility, etc.). Even though the body is small and stylish, I didn't want to use unattractive brackets or adapters. The Normal blinker mirror which is already hard to see and is in the way was made into the Bar end mirror, and the KIJIMALED Blinker was made into the OEMMirror mounting hole.:It is the 959 Panigale that I had set up (I rejected the thin blinker made overseas by NRC because it doesn't pass the inspection and the visibility is bad), but I still felt dissatisfied with the shape and the largeness of the blinker and challenged the direct mounting of the Cowl of Kellerman! There is no flat surface that can be installed facing straight ahead in the range that conforms to the vehicle inspection.
So I decided to use the bolt hole (5mm diameter) at the junction of the upper cowl and the side cowl, but since the length of the bolt part of the Blinker Body is not enough, I had the 15mm extension adapter of the Option processed and somehow managed to install it. So I got the optional 15mm extension adapter and installed it somehow. It protrudes a little from the cowl and faces inward a little, but it seems to be no problem for visibility. For the time being, I will ride with this for a while, and if I find a better way or position, I will change it. Well, it's something that no one but the owner will know unless you tell them, but that's the nature of custom lovers.
When the Blinker became small and stylish, I wanted to change the Bar end mirror to something a little more small.
I think that the installation is relatively easy because there are various mounting adapters with the option. I think it is a product that can be recommended.
View detail