Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400
Sounds great but loud decel popping
I think this exhaust looks and sounds great, but there is loud popping when shifting gears and decelerating. Any advice on how to fix this? View detail
Fits: HONDA FTR223, HONDA GB250 CLUBMAN, HONDA CB400SS, HONDA MAGNA(V-TWIN MAGNA), KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W400, KAWASAKI VULCAN400, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225E, YAMAHA DRAGSTAR250, YAMAHA VIRAGO250(XV250), YAMAHA SRV250, YAMAHA RENAISSA
unique quality products
I bought this years ago. I love the clean and simple look of the handlebars. I shortened the length a little. I had a little accident. The bracket was broken, I repaired it by welding. That's why it started to rust. I love the way it looks. The mirror is very easy to use, the viewing angle is sufficient. I disassembled the fork for oil change, I will clean the rusty. I will buy another one again for my Xs 650 project. I definitely recommend it. View detail
Throttle Cable tip processing was messy.
I was satisfied with the quality of the product, but the ball on the Throttle Cable attached to the Throttle was poorly machined on the Throttle mounting side, and it did not fit without modification. View detail
There is BALI!
ALCAN handsHand bar with UniversalThrottle Wire Type1.
There was a BALI in the Holder and there were times when the Throttle Wire did not return.
I started to scrape around BALI with File.
Processing is considered necessary.
View detail
Exactly to Fork4.5cm extension!
I saw a post by another reviewer that said it would be a good fit for the price and size, so I took a chance and bought it. The upper part of the boots is fixed with a band, and the lower part fits the size, so no tape or band is needed. There were no drainage holes in the lower part, so I drilled some holes with a solder iron just in case. It has been a month since I installed it and I am satisfied with the Large size without Gap. Now I wonder how long it will last…. View detail
A good value at this price.
I bought it for the xs650 bobber project. I liked the retro style. The bobber style makes my bike look great. It works fine, no problems. I used a different bracket that I thought fit better. Be sure to look closely at the image to determine if the included support will work for you. The shell is chrome plated metal.The chrome plating is really high quality, easy installation,I know what all of the wires do because I have a wiring schematic and the plugs are identical in configuration to accept the H4 bulb. I thought about replacing it with an LED bulb, but it doesn't quite fit the bobber philosophy. It's not like cheap Chinese goods, it's really high quality, I definitely recommend it. View detail
you need this for bobber or cafe racer project
For the Bobber project, we needed parts such as handlebars and headlights. We prefer quality Japanese parts, not cheap parts. Installation is easy. The handlebar fits perfectly. The angles are really good. Handlebar length is sufficient. The engine is xs650, my height is 190cm. Ok. The handlebars are not very comfortable. Long journey is tiring, driving feeling is poor. It added a different coolness to the bike,looking good View detail
Low-profile License Plate Base
[How is it used?
If you have a Fender Eliminator, there is a risk that the License Plate may bend, so we purchased a base plate as reinforcement.
Was the one you received as per Image?
The quality is not bad, but since it is FRP, strength needs to be taken into account to a certain extent.
Was the installation difficult?
It is easy to fix by simply clamping it onto the License Plate.
How was your experience with it?
Quantity:Pair (for Left and Right) The reverse side is attached with Carbon Seat, and the other side is attached with Carbon Seat. [Color] Clear is blown on it so it seems to be easy to clean.
[Was there anything that disappointed you?
It is thinner than you might imagine, so it is likely to be cracked by a Damage that hits it. It is a reinforcement to prevent the License Plate from bending.
View detail
Compared to OEM
The OEM was worn out, so I replaced it with a new Seat, and the pitch is perfect, so no modifications are needed. View detail
I am the one who impremented "for Brembo?
GoodridgeType's thin banjo adapter would not fit under the neck, but EarlsType's banjo adapter may be just right. View detail
Lighter handling.
Changed to Pulley North America.
It was immediately felt that the handling was noticeably lighter compared to the OEM.
I used the attached collar and it looks slightly wider.
Color is a separate adjustment.
View detail
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
At first, I was thinking of using DAYTONA's Ceramic coated Glass Wool in combination with NeoFACTORY's Reasonable Glass Wool, but when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching part. However, when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching section, so I decided that it would be better to use Stainless wool wrapped around the Punching section.
The product I received was smaller than I expected, but when I spread it out, it was long enough to wrap around the Punching part twice, and it was just right. Then, I wrapped NeoFACTORY's ordinary glass wool on top of it, and wrapped needle gold on top of it to fix the Silencer.
I have tried to play the engine, and the sound was not so different from before I changed the contents.
View detail
The pull is quite Large.
This is a very well-made handlebar with beautiful plating.
The Narrow Trucker Bar was a TRACKER-like Position Image.
I used it on a TW200, but it was squeezed to make it Narrow and the position is much more drawn forward.
If that is your preference, it is fine, but if you are too pulled in by the name TRACKER, the Image may be a little different.
I am 180cm tall and when I held Handlebar, I felt like I was standing upright.
It is suitable for those who like to ride Style sitting on the street.
View detail
Used for PositionHazard
The switch of PositionHazardRelay harnessKit was broken due to deterioration, so I replaced it with this one. 3-position switch (ON-OFF-ON) was needed, but it was a little difficult to modify due to the special wiring. It is usable for now, but I wish it had a more sophisticated design. View detail
RearRefreshing
OEM was good, but I took the plunge. The quality and appearance were good. The only thing is that it came with an installation manual, but I didn't understand it very well and finally installed it after looking around for a video on the Net. View detail
quite painful
It was used for VOLTY.
The appearance, including the texture, is very good.
I have not tried other suspensions of this length, so this is subjective, but the impact is still not comparable to OEM and is quite painful even at the softest setting.
However, I think the people who choose this length are mostly concerned with appearance, so I think it is a very good evaluation.
View detail
Used for Smartphone Holder mounting
Used for Smartphone Holder mounting.
Separate handle so it cannot be attached to the handlebar, and the bracket that comes with the Holder can be attached to the Mirror attachment point.
I was going to attach it, but it was too narrow here, so I used it to Offset from the base of Mirror.
I don't think the strength is a problem.
View detail
To change the ride quality
2004ESTRELLA CUSTOM。
I was wearing HURRICANEWide low and liked the styling very much, but I decided to replace it because it has a slightly forward leaning posture and long touring is becoming difficult for me with stiff shoulders.
The handlebar itself is thick and sturdy without any complaints. (NORMAL + 10 cm) 。
In addition, I changed to a Solo seat without Spring, so positioning is easy and comfortable.
The handlebar has a good amount of squeezing and the shape of the handlebar is such that it is not an exaggeration to say that the handlebar is only held by the hand, and the burden on the shoulder is almost Zero.
Long touring is yet to be done, but so far I am happy with the change.
I wish I had Black.
View detail
Not bad
Not bad considering reasonable price. Nice minimal/vintage/classic design. Visibility is not so great . And SR400 high vibration may be a problem since the mirror itself and stem is very light weight. View detail
Required for OEMHarness processing
OEM6V MONKEY/GORILLA Main Harness was used as a coupler when it was processed.
The ease of use is OEM Equivalent Product.
View detail