Reviews
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
Gasket-like… of carburetor's Manifold.
I thought I ordered Exhaust pipe Gasket but I received something different….
I think this is Gasket on the carburetor side…?
I can't even return it, which sucks.
View detail
Poor machining accuracy
I purchased this product to save the trouble of drilling holes for installation, but the pipe diameter is larger than the hole diameter of the OEM parts, and it was not possible for an amateur to install. It seems that special tools and fixtures are required for installation.
In case you are wondering, we tried a universal handlebar made by HURRICANE, but the pipe diameter was appropriate, so it was possible to install it even with amateur work.
View detail
It's tight and one-sided.
The Size is tight, and it gets weirdly one-sided in one run, as shown in the image. View detail
I'm not buying anymore.
Two weeks after installation, I tried to remove it because it was interfering with my work.
Screw on SIDE is stuck and cannot be removed.
If you are prepared to buy it with the knowledge that you will not be able to remove it, it may be a good price point.
I wouldn't choose it again, though.
View detail
Fits: YAMAHA VIRAGO250(XV250), HONDA CB400SS, HONDA FTR223, HONDA GB250 CLUBMAN, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA RENAISSA, YAMAHA SR400, YAMAHA SR500, YAMAHA SRV250, YAMAHA TW200, YAMAHA TW225E, YAMAHA XS650, Others
Defective item
It was defective; one of the two was governor.
It was difficult to install after purchase, so I could not process a return.
View detail
Not for Large people.
I bought it because I was interested in the Bobber style and Chopper taste of yesteryear.
As the name suggests, it is shaped like a tran pet.
good point
Slip-on silencer for easy installation 。
○ Low cost.
A bad point
○Sound quality, bombastic sound.
The sound cracked and the vibration was Large. Therefore, Crack started to appear on the Bracket.
The carburetor setting is too large and easy to miss.
○○ Definitely, the vehicle inspection is NG.
I think it is not to expect sound quality and performance since it is a style-oriented exhaust system, but I thought it would be embarrassing for a young girl or a reasonably large person to put it on.
View detail
Could not be used (MT-25/Brembo P4-40C)
I used it to replace the front brake caliper with a Brembo P4-40C on a MT-25 (2016/ABS no ABS) with a Normal Brake line, but it was too long under the neck and bottomed out. It is very difficult to clean the caliper because of the shavings left by the bolt.
I bought a Banjo bolt 992-03-31SCBK from active in a hurry and was able to get away with it.
I wanted to have information on compatible banjo bolts in the description of Caliper, since the one I bought as an alternative was unusable because Brembo's OEMBO banjo bolt was out of stock.
View detail
Don't ever make a purchase possible!
SSK's product was also Large outlined, but
The only thing I managed to do when I roasted it with a heat gun was to
This can be seared to death and bent in the opposite direction of distortion.
The distortion will return to its original distorted state and the distortion will not be corrected.
Also, the product image looks like Carbon.
The back side was FRP with a dirty finish.
View detail
It's not a product evaluation, it's a construction issue.
I received it today. The only complaint I have about the product is that I can't open the lid. I've been nudging the screw a bit, but it doesn't seem to be loosening. I know you didn't even check it by squeezing it with the power tool like an idiot, but what are you really going to do about it? View detail
The cheap buy.
I bought two and both ran out after about a month.
The tail light is 6W and the wire is thinner than the domestic 5W one, so I wondered if it was Large sturdy. I thought so, but it was not Large sturdy.
I still prefer to use lights made by a proper manufacturer.
View detail
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
Not compatible with YB-1
It is not for YB-1 but probably for YB-1 four. I couldn't use it, but the texture seemed to be adequate.
(Right image is OEM, Left is this product.)
View detail
Fits: YAMAHA TX650, YAMAHA XS650, Others , YAMAHA XS-1, YAMAHA XS650, YAMAHA XS-1
Causes severe oil leakage
After replacement, the oil started to leak heavily. I contacted the manufacturer but no solution. I was told that they would contact me later, but they did not contact me for more than 10 days. I guess they didn't test it by themselves. If you look at other companies' products, you will see that the exclusive Washer is not available in Quantity:It is sold in Set, so I bought that one again and it went away. View detail
goods Throttle Wire
I'm going to stop being a member. View detail
I will not buy it again.
There is no Instruction Manual, so I don't know how to open it.
The product is also full of scratches. I will not return or exchange it because it is too much trouble, but I will not buy it again.
View detail
be of a different diameter
Silver arrived, but because the diameter is Large than the GoldPlating article, when the GoldPlatingBullet Terminal of Male side is inserted, it is loose.
"*There may be changes to the product specifications due to manufacturer reasons. Is this what the warning is about?
Or was the diameter of the Bullet Type Terminal different for the Manufacturer from other Manufacturers before this?
View detail
worst case scenario
I received the product, but the parts I asked for are missing, and they haven't responded to any of my calls, so I'm going to have to make sure I'm delivering it right I want you to do it (?°??°?)
Also, I need a better way to contact you!
View detail
There's no point in buying it
The position of the clasp is Quantity:Pair (for Left and Right) It's not symmetrical, and it's hard to fasten even with CUB's Carrier
The elongation of Rubber is not constant, and there are places where the elongation is low and it is difficult to fasten In some places, it comes off easily
View detail
It does not suit
Why is not it addicted at all! If it is Universal it is a funny story though it is still issuing for SR. Perhaps it was incompatible with Carburetor Vehicles for FI? If so, it should have a description such as for FI! None of that SR is known Unknown ... Is not it Yamaha's SR in the first place? View detail
To Custom around Handlebar
Inspected goods received and confused.
For mounting screws BALI many.
Especially the head of the Minus screw for ThrottleInner rattling prevention is severe, it is difficult to adjust because the tip of the slotted screwdriver does not enter.
Outer's Black Painting is very mottled and it is very suspicious whether it is really a shipping item after inspection work. (We decompose all products on our Manufacturer's website blog - Although there was content to the effect that inspecting is done)
Throttle's backlash is more than expected and unpleasant for ease of use.
I did not expect excessive expectation for Universal Product, but I do not think that it is here and it will not be very disappointing.
It is not inexpensive price range, so it is honestly useless expenses ...
If purchase directly from Manufacturer it may have been possible to consider returning, but after breaking the seal and tampering, I gave up the return.
The gap between the throttle holders after installation was also very wide, not clearly acceptable Level gap.
Based on this reason, I realized that purchasing universal type parts must be done cautiously.
☆ Evaluation is also unavoidably one because there is no 0.
We are sorry for those who like our Manufacturer products, but we will consider Holder made by other Manufacturer products.
View detail
To remove the Handlebar Switch
Buy Left Handlebar Switch for Headlight switching at removal.
I will match on my own vehicle that uses Plating parts frequently, but SwitchBody (Particularly resin portion) And Handlebar fitting parts feel very cheap making.
It is a product that can be installed without difficulty if you understand Wiring. It would be even better if you could prepare a Wiring diagram.
I fixed a commercially available Rubber sheet between Handlebar and Switch mounting parts.
Just ... It also checked the operation and there was not any problem in the operation, but again the cheapness was conspicuous, I did not like it, I was forced to restore it.
Style emphasis If Custom is refreshing around Handlebar, if such a Custom is your favorite item is not it a good product.
As above, if you can refer ...
View detail