Reviews
Fits: HONDA CB223S, HONDA CB400SS, HONDA FTR223, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, KAWASAKI ESTRELLA, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI VOLTY, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA SR400, YAMAHA SR500, HONDA REBELUp half-wheel* with AMALThrottle
Changed from a bifurcated Wire type for independent Carburetor
I bought a battered 900SS (900SL) and am Restore.
The FCR Carburetor Body is used for the carburetor, but it is not a two-cylinder one, which is often used in car-specific kits, but independent for the front and rear cylinders.
(Independent Carburetor is designated because the radical Camshaft has teamed up with)
For Independent Carburetor, generally comes with a Car Model Kit Throttle Wire branched in the middle." is commonly used.
It is normal to have two branches and four wire ends because they are used for the open and closed sides, respectively.
That's how I used to do it.
To be precise, the Reverse Side was removed because of the poor Throttle Fee Ring, and only the Open Side was used by maintaining the smoothness with frequent maintenance.
The fee ring has been improved considerably since it is only on the open side, but there is still a branch joint in the middle of the ring, and it lacks directness.
To overcome this, we prepared this Wire to pull each Carburetor to Direct.
Wire itself is quite normal, nothing special to say.
If anything, the middle Joint is Material:I'm glad it's Stainless Steel, because I don't have to worry about Rust.
However, there is a bad part, the molding shape of Thailand is a little rough...
Of course, it is not unusable, and there is nothing wrong with using it as it is, but it is not a problem to use the bean-jam-filled wafers. (Monaka) I am concerned about the raised areas of the mesh that were formed by the matching process.
Since the thailand part may rotate slightly at the beginning of opening or just before full opening, the round thailand part will improve the fee ring at the very small opening angle.
I used File to round it out before I used it.
Even if the fee rings are not affected, the thailand coils without any snagging are easier to maintain.
Also, there is no coated tube inside the Outer tube.
It is a Wire configuration with no features whatsoever, consisting of Spiral Tubes made of the old-fashioned Gold genus.
So the first lubrication is a Large thing.
Without oil, the feel will be rough, and with high viscosity oil, it will be sluggish.
On an FCR Carburetor Body with the Reverse Side removed like mine, it is fatal and life-threatening not to be able to spackle back.
This is not limited to this Wire, but try it often before lubricating with the best Oil.
View detail
Processed to VM38.
I bought this for a YamahaXV750E with two VM38Carburetors.
Quantity since it is a 2-stack:I bought 2pc
I once bought a 2-sided Cable for another car model, but it was not long enough and the Piece of the 2-sided part was not enough φ38Carburetor could not be opened.
The VMcarburetor is a type that directly pulls up the throttle valve, so the wire stopper is a traditional gourd shape.
There are some available, such as for SUPER CUB, but I was concerned because the lengths do not match and they seem to be very poor.
Surprisingly, I could not find one for Large size vehicles, and after much searching, I found that GOODS sells one for SR400 and purchased it.
They said it was forφ38Carburetor, but it is only for AMAL364TypeThrottle holder, so it needed Outer processing.
In my case, I have a two-stack, so Tommaselli's Quantity:2pc pull Throttle is used.
It is a pull×2Type instead of a pull/reverse, which is a bit unusual in modern times.
The Inner cable was not long enough at all, so we cut the Outer by 7cm.
The Crimp in the end section was also ported.
Thailandco used Active's products, but since Screw alone seemed to fall out, Solder was poured to fix it in place.
I was able to install it successfully, and since it can be adjusted in the middle of Cable, it can be tuned out.
View detail
goods Throttle Wire
I'm going to stop being a member. View detail
Fits: HONDA CB223S, HONDA CB400SS, HONDA FTR223, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, KAWASAKI ESTRELLA, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI VOLTY, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA SR400, YAMAHA SR500, HONDA REBELUp half-wheel* with AMALThrottle
To AMALThrottle
Especially neither possible nor impossible. There is nothing like an ordinary Throttle Wire, but without this it is not possible to install the AMAL Throttle so purchase. View detail
Fits: HONDA CB223S, HONDA CB400SS, HONDA FTR223, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, KAWASAKI ESTRELLA, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI VOLTY, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA SR400, YAMAHA SR500, HONDA REBELUp half-wheel* with AMALThrottle
Did you buy AMALHolder?
Since I bought AMALHolder, I purchased a private wire automatically.
Separate handleCR is attached to Carburetor. It is also 900 long but I dare buy 1000 and put out much in front of the car. I am committed.
Anyway it looks like a bicycle Wire and old poi!
View detail
Fits: SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy
It purchased in order to plan compatibility with a pure thing, but the thing of 100-mm Long reached the house. Please purchase after considering firmly the direction which considers purchase.
It purchased in order to plan compatibility with a pure thing, but the thing of
100-mm Long reached the house.
Please purchase after considering firmly the direction which considers
purchase.
View detail
Fits: SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy
Since some picked a quarrel and admiration was felt, it exchanged, but in purchasing a Throttle wire, a authentic positive thing and what has the same die length were expected, but the thing of a 100-mm Long reached the house. Although attachment
Since some picked a quarrel and admiration was felt, it exchanged, but in purchasing a Throttle wire, a
authentic positive thing and what has the same die length were expected, but the thing of a 100-mm Long reached the house.
Although
attachment was able to be especially made satisfactory, since only a few floats and is carried out, it is slightly regrettable.
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
since it stopped arriving with Up-Handle wearing if pure -- -- this product was purchased. It may be cheap. It may be long. Although there is no Dress-up effect in particular of appearance up, since this die length can equip with most Han
since it stopped arriving with Up-Handle wearing if pure --
-- this product was purchased.
It may be cheap.
It may be long.
Although there is no Dress-up effect in particular of
appearance up, since this die length can equip with most Handles with
, it is satisfactory.
View detail
Fits: KAWASAKI ESTRELLA, KAWASAKI W650, KAWASAKI W400, KAWASAKI 250TR, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CB400SS, HONDA CB223S, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI VOLTY, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA SR400, YAMAHA SR500, HONDA REBELUp half-wheel* with AMALThrottle
if a price is considered -- such もん -- it is -- it is the touch ... You are a Parts indispensable to utter old touch. Aren't you good well by a Design as if it copied the historical character?
if a price is considered -- such もん -- it is -- it is the touch ...
You are a Parts indispensable to utter old touch. Aren't you good well by a Design as if it copied the historical character?
View detail
Fits: SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy
[ -- the Webike Monitor ] -- it can use satisfactorily. Appearance does not change at all, either!
[ -- the Webike Monitor ]
-- it can use satisfactorily.
Appearance does not change at all, either!
View detail
Fits: SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy
[ -- the Webike Monitor ] -- it is a match at a price too. It compares that it is pure and there is no changing place.
[ -- the Webike Monitor ]
-- it is a match at a price too.
It compares that it is pure and there is no changing place.
View detail
It is used for a steed. It exchanged together on the occasion of handle exchange. If it gets used although attachment may suffer troubles just for a moment, it is easy. There is also no problem in use.
It is used for a steed.
It exchanged together on the occasion of handle exchange.
If it gets used although attachment may suffer troubles just for a moment, it is easy.
There is also no problem in use.
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods.
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods. View detail