Reviews
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
Not compatible with YB-1
It is not for YB-1 but probably for YB-1 four. I couldn't use it, but the texture seemed to be adequate.
(Right image is OEM, Left is this product.)
View detail
Priceworthy accuracy, rare and excellent design
This is an EMGO product from Taiwan, which is famous for its Re-Product.
The M6 ShoulderBolt for lever fixation is a rare DomeHead type that understands the old car lovers.
There are two things I am not happy about.
1. The position of the fulcrum hole of the brake lever is slightly off, so it does not fit into the holder exactly when the brake is returned. (Tolerance is acceptable and there is no functional problem)
2. Cable AdjustingBolt and Holder are hard due to inaccurate screw cutting, and need to be adjusted with M8Tap and Dice. (After correction, it turns smoothly.)
Still, I am very satisfied with the overall product and would buy it again if I need it.
View detail
The price is cheap.
The price is cheap, so I bought it for Spare of Wiring.
The price is cheap and you can order from 1pc.
The listing photo and description are Gold, though.
I'll give it up because it's cheap, but I wanted the Gold color.
View detail
Costa, good light!
The Shovel's low beam stopped working, so I replaced it with this Headlight Bulb.
Shovel has a lot of vibration, so I thought that might be the cause.
HeadlightBody is using Other Brand Product.
It was slightly slimmer than the existing Valve.
It is good to stock two or three of them because it is cosy.
It doesn't reduce vibration, so I'll keep it in my Tool Bag.
The image is of an existing Valve.
View detail
Wiring, Re-Crimping
Wiring (Disconnection) It is old and I bought it for re-assembly. The price is reasonable and good. I thought this was the one I wanted because it was Gold in the picture. When I received it and saw it, it was a silver one.
It's inexpensive, crimpy, and if it connects properly, there's no problem.
View detail
Replace because it's getting tired
I bought this type to replace the Power Filter which was installed when I bought the car. The intake air seems to have improved. View detail
goods Throttle Wire
I'm going to stop being a member. View detail
Change from Straight Type
Straight type was installed when I bought the car, but it was contacting with the frame and wiring, so I changed to this Taper type. View detail
Defective products are mixed in.
There are about 3 defective products out of 10.
Tail and Brake are mixed in with each other.
The unit price is low, so the rating is 2.
View detail
be of a different diameter
Silver arrived, but because the diameter is Large than the GoldPlating article, when the GoldPlatingBullet Terminal of Male side is inserted, it is loose.
"*There may be changes to the product specifications due to manufacturer reasons. Is this what the warning is about?
Or was the diameter of the Bullet Type Terminal different for the Manufacturer from other Manufacturers before this?
View detail
SilverPlating has arrived.
I received the SilverPlating one, which is different from the product picture.
The finish is good, but the Male terminals I bought with it were GoldPlating, so they are not aligned.
View detail
Convenient to sell by 1pc. unit
The ability to buy by the 1pc. unit is revolutionary, and it's convenient to buy as much as you need.
The packaging is also easy to handle as there is no extra paper Tag or Stapler.
It's also nice to pull out and have a moderate Click feel.
GoldPlating seems to have good conductivity.
View detail
Badly built and dark.
I installed a Yamaha TDR80 with 12V electrical system.
When I applied force to install it, the LED installation board part caved in and spun around in the middle of the Valve, damaging it.
The parts are only connected with a Glue gun, so it will come off with a slight force.
Fortunately, there was no wire breakage, so I was able to repair the part by putting it back in position and fixing it with instant glue.
It's bright, but honestly, it's dark.
The original Xenon sphere seems brighter.
The LEDs all light up, so it doesn't seem to be a defective product.
The power consumption is low, as you would expect, and there is no flickering with all the lights on as the Blinker blinks.
I plan to use it until I replace it with another high light one.
View detail
Sufficient performance
I bought it as an OEM replacement.
It seems to be slightly brighter than the OEM.
It's been two years since the replacement and it's working fine.
Each part is well finished and can be replaced in Smooth.
View detail
It's not very flashy.
It's not as flashy as other recent LED bulbs, but it's the most stable and superior in terms of function and performance, and it's not fashionable, but it doesn't interfere with night driving. View detail
Available from 1pc
I'm satisfied with Large because I can buy only the parts I need for the parts I rarely use
The terminal and the coupler were not softer than OEM parts because they were new It's also securely installed
It was more than enough
View detail
GOOD
I used it on Honda's MAGNA50
The Brake lever and Holder on the Right Side are connected to the SPTakegawa Since I changed to Standard Type, I changed the Clutch Side as well
OldHondaStyleLever of GOODS is, as the product name suggests, an old-fashioned Honda type
It's a Standard that couldn't be better
Both the Holder and Lever were matte black
Brake lever and Holder of SPTakegawa have Luster and Black color So it's a bit of a failure lol
Well, I think it will shine if you polish it up, and that's exactly what the Brake lever has been doing from the beginning with GOODS' I should have bought an OldHondaStyleLever
The cable adjuster is probably made by Brass
I'm sure that Holder and Lever, which Mr. Minimoto sells, are also Cable The adjuster was made by Brass, so maybe, just maybe, lol
However, the mirror mount of the Minimoto's products is M8, so I don't want to do it this time We're here
The brake lever of SPTakegawa was M10, so I used this one to match it I chose
In addition, the Thai part of Cable is a Large type, so you can use it as I think MONKEYOEM's Cable, for example, is too loose
Buy a Clutch Cable for an external Lever such as SPTakegawa
Accuracy and texture are both good
I don't know how long it will last since I just put it on, but it's a rickety OEM that's been rattling around for a good 10 years It feels better than Product
View detail
It's broken
After six months of use, the body has finished splitting in two from the mounting area
I changed to LED in order to avoid running out of bulbs, but I didn't expect the body to be broken
View detail
What you need
A part that many people will need during each Holder replacement that the company sells
Seems like it could be sold by more manufacturers
The product itself fit into the hole with no problems
View detail
Good
My light box wire is damage, so I cut that and ember this terminal, now the light box is repaired and can be use. It is good condition and perfect. View detail