Reviews
To repair headlights, many models are available at each size. View detail
A good value at this price.
I bought it for the xs650 bobber project. I liked the retro style. The bobber style makes my bike look great. It works fine, no problems. I used a different bracket that I thought fit better. Be sure to look closely at the image to determine if the included support will work for you. The shell is chrome plated metal.The chrome plating is really high quality, easy installation,I know what all of the wires do because I have a wiring schematic and the plugs are identical in configuration to accept the H4 bulb. I thought about replacing it with an LED bulb, but it doesn't quite fit the bobber philosophy. It's not like cheap Chinese goods, it's really high quality, I definitely recommend it. View detail
Size 5-3/4 suitable for many front tank models. There are high and low lights. and notification light View detail
I'm not buying anymore.
Two weeks after installation, I tried to remove it because it was interfering with my work.
Screw on SIDE is stuck and cannot be removed.
If you are prepared to buy it with the knowledge that you will not be able to remove it, it may be a good price point.
I wouldn't choose it again, though.
View detail
Plating is Beauty, but durability is a problem
[How is it used?
I purchased this bracket to change to a bracket that can be directly attached to the front fork when converting to a front disc.
Was the one you received as per Image?
Plating is more Beauty than expected.
Was the installation difficult?
The fork is sandwiched with rubber to prevent damage to the fork, but the attachment itself is of the sandwiching type, so it can be easily installed without detaching the fork.
How was your experience with it?
I have used it without any defects, but it is easily distorted when force is applied due to interference, etc., so it is not strong enough.
[Included Parts:were they on?
Mounting Screw is included.
[Was there anything that disappointed you?
It is thin Steel, so its strength is weak.
The one made by ▼Posh is made in the same way, so we recommend this less expensive one.
View detail
We will be reverting back to OEM.
When replacing the OEMHeadlight, the Light is too small and all the Wiring that was originally in the OEMLight is now out of the Light.
I asked my favorite motorcycle shop to install it, but they couldn't help me. The handlebar area was too messy.
Design is very Parenthesis, so if you still like it, I recommend this product!
View detail
Small Type conversion!
It is a shape that can be adapted to any spec.
License Plate Light is a little dark ?
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Blinker relocation
Required for Blinker relocation.
I think it's a good product with no problems.
View detail
GOODS 5-3/4 Bates Light Kit
I purchased the headlights of the goods company. It is mounted on the w800 and I am satisfied with its more beautiful appearance. I am satisfied with the change from heavy to light. Go ahead and buy it. Thank you. View detail
Fits: HARLEY-DAVIDSON XR1200, HARLEY-DAVIDSON V-ROD Series 06-11, HARLEY-DAVIDSON Sportster Series XL 04-16, HARLEY-DAVIDSON Softail Series 84-16, HARLEY-DAVIDSON Dyna series 91-16, HARLEY-DAVIDSON FLSTSB, HARLEY-DAVIDSON FLSTSB, HARLEY-DAVIDSON FLSTSC SPRINGER SOFTAIL CLASSIC, HARLEY-DAVIDSON FLSTSE2 CVO, HARLEY-DAVIDSON FXCW ROCKER, HARLEY-DAVIDSON FXCWC ROCKER C, HARLEY-DAVIDSON FXS, HARLEY-DAVIDSON FXSB LOW RIDER, HARLEY-DAVIDSON FXSBSE CVO BREAKOUT, HARLEY-DAVIDSON FXST SOFTAIL STANDARD, HARLEY-DAVIDSON FXSTB NIGHT TRAIN, HARLEY-DAVIDSON FXSTC SOFTAIL CUSTOM, HARLEY-DAVIDSON FXSTD SOFTAIL DEUCE, HARLEY-DAVIDSON FXSTS SPRINGER SOFTAIL, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD
You will not be disappointed - this is a super bright light!
Bright light good looking the only beef I got is the 2 cent garbage plug adapter that you have to modify to make work. Not cool for the amount of money for this headlight. put this light on my xr1200 and it is amazing! Had to install an inline dimmer switch from goods Designs for riding on the street - knocks it down to 20% - which works well on the street and uses the stock high/low beam switch. Kick it up to 100% and it is ridiculous! First the negatives. The light is heavy. It adds a noticeable weight to the front end. It makes the steering feel hard and sluggish. It affects the balance and feel of the chassis. The positive. It’s plug and play. Very easy to install. It is of high quality! It’s very bright. It might be just fine if you were willing to ride enough and get used to it. View detail
Used for Smartphone Holder mounting
Used for Smartphone Holder mounting.
Separate handle so it cannot be attached to the handlebar, and the bracket that comes with the Holder can be attached to the Mirror attachment point.
I was going to attach it, but it was too narrow here, so I used it to Offset from the base of Mirror.
I don't think the strength is a problem.
View detail
It's not a product evaluation, it's a construction issue.
I received it today. The only complaint I have about the product is that I can't open the lid. I've been nudging the screw a bit, but it doesn't seem to be loosening. I know you didn't even check it by squeezing it with the power tool like an idiot, but what are you really going to do about it? View detail
The cheap buy.
I bought two and both ran out after about a month.
The tail light is 6W and the wire is thinner than the domestic 5W one, so I wondered if it was Large sturdy. I thought so, but it was not Large sturdy.
I still prefer to use lights made by a proper manufacturer.
View detail
Fits: YAMAHA tricker, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650
It's perfect for the YB125SP.
I was looking for a Center mountLight Bracket for YB125SP, and I found it.
I was able to install the Normal fork without any modification.
View detail
Costa, good light!
The Shovel's low beam stopped working, so I replaced it with this Headlight Bulb.
Shovel has a lot of vibration, so I thought that might be the cause.
HeadlightBody is using Other Brand Product.
It was slightly slimmer than the existing Valve.
It is good to stock two or three of them because it is cosy.
It doesn't reduce vibration, so I'll keep it in my Tool Bag.
The image is of an existing Valve.
View detail
Looks cool!
[How is it used?
I bought it because I wanted to make the headlight of 250TR Small and low.
Was the one you received as per Image?
The size of the headlight was smaller than I expected, but I'm satisfied with it compared to the OEM.
Headlight itself is probably Universal Product of for H4 Bulb. It was the one that I saw in Yaok etc. occasionally.
Car Model Exclusive BracketThis was a product that was also sold as a Single Item from the same GOODS.
Was the installation difficult?
Installation is easy as long as you can remove the OEM Headlight and Meter and the Bracket that holds them together.
Because some Cable and Wire went through OEMHeadlight Bracket, I felt it was troublesome, but it is not that Large strange because only Brake hose went through outside.
Because I have to remove Bracket. At the same time, it is necessary to consider the installation of Meter and Front Blinker.
How was your experience with it?
The headlight cover does not have a hole to stow the wiring, so you need to think about how to handle the wiring.
I've bundled myself into Frame in a miscellaneous way for once. I'd like to Refreshing this place too if I get motivated.
[Included Parts:were they on?
HeadlightBody and Bracket Only.
[Was there anything that disappointed you?
I wish I could have handled Wiring.
There is no Instruction Manual
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Light Bracket exchange
When I replaced the Blinker, I had to replace the OEM Bracket because it had a hole in it.
The work itself is easy, but the Instruction Manual is not included, so you need to check and replace it by yourself.
When replacing with OEMLight, the Light position is 1cm lower than OEM and 3cm forward
You can't use the Bracket for angle adjustment, so you have to make it yourself or fix it in two places.
Since the space between the Meter and the Light becomes wide, the mounting position of the Meter may be a concern.
View detail
Think about the overall Balance.
I bought this for the balance of the vehicle. I installed it with a little rearrangement because the seat of Bolt which tightens it hangs on the part of the radius. I am satisfied with the position as I wanted. View detail
textured good feeling
I bought a similar product before but the texture was not good. I liked this consumption because of the texture. View detail
It looks like a nice installation, but…
It seems to be able to be installed as the Title and the quality is good, but the quantity is Quantity:1 Set (Quantity):2pc. I thought it was a "Set" and set the quantity to 1, but what I received was 1pc. I should have looked carefully, but a note would have been helpful. View detail