Reviews
Plating is Beauty, but durability is a problem
[How is it used?
I purchased this bracket to change to a bracket that can be directly attached to the front fork when converting to a front disc.
Was the one you received as per Image?
Plating is more Beauty than expected.
Was the installation difficult?
The fork is sandwiched with rubber to prevent damage to the fork, but the attachment itself is of the sandwiching type, so it can be easily installed without detaching the fork.
How was your experience with it?
I have used it without any defects, but it is easily distorted when force is applied due to interference, etc., so it is not strong enough.
[Included Parts:were they on?
Mounting Screw is included.
[Was there anything that disappointed you?
It is thin Steel, so its strength is weak.
The one made by ▼Posh is made in the same way, so we recommend this less expensive one.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Light Bracket exchange
When I replaced the Blinker, I had to replace the OEM Bracket because it had a hole in it.
The work itself is easy, but the Instruction Manual is not included, so you need to check and replace it by yourself.
When replacing with OEMLight, the Light position is 1cm lower than OEM and 3cm forward
You can't use the Bracket for angle adjustment, so you have to make it yourself or fix it in two places.
Since the space between the Meter and the Light becomes wide, the mounting position of the Meter may be a concern.
View detail
It looks like a nice installation, but…
It seems to be able to be installed as the Title and the quality is good, but the quantity is Quantity:1 Set (Quantity):2pc. I thought it was a "Set" and set the quantity to 1, but what I received was 1pc. I should have looked carefully, but a note would have been helpful. View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here. Since the 2. Fork clamp which a 1. fixing position can a
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here.
Since the
2. Fork clamp which a
1. fixing position can adjust easily is slim, the
advantage.
In a jumble, compared with
1.chuckbox, the bore diameter by the side of a too cheap (it is whether it is reasonably priced)
2. Headlight of the
fault with little admiration was M8, and since its own light was M10, it had to be processed by itself.
(Even if it extends, intensity seems to be OK well)
--
-- if the one where a Stay is longer is incidentally turned up, a light can be attached low.
Conversely, high mounted one is possible if it carries out.
If it says by force, I will want you to improve texture more.
.
.
View detail
Although it does not have a problem since the goods themselves are basic things ... A thread part and a connection section rust immediately. It rusted by neglect at the outside of one day... A recommend cannot be carried out to the direction which wan
Although it does not have a problem since the goods themselves are basic things ... A thread part and a connection section rust immediately.
It rusted by neglect at the outside of one day... A recommend cannot be carried out to the direction which wants for rust to dislike and come out [ direction ] and to always maintain a new article state finely.
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Attachment was easy and the circumference of Wright felt it refreshed.
Attachment was easy and the circumference of Wright felt it refreshed. View detail
It is used for 250TR. The size of this level thought just right kana, and purchased. Although I also regard other manufacturers' bates type light as that being right, since it does not enter at all, wiring needs in a headlight processing of the co
It is used for 250TR.
The size of this level thought just right kana, and purchased.
Although I also regard other manufacturers' bates type light as that being right, since it does not enter at all, wiring needs in a headlight processing of the connectors which were in the headlight from the first.
Since it hardly runs night, it does not understand, but since it is not a high wattage specially, either, I think that brightness is common.
The blue lens which shines in the upper part of a main part when a high beam is used is attached.
Since wiring which has come out of the main part is unreserved wiring with a color, I think whether it should cover with a corrugate tube etc.
It is not the elaborate structure, since it is necessary to unite packing and direction of a lens and to bind the cover of an outer circumference tight once it takes a main part into pieces, it is extraordinarily slightly troublesome, but since the thing itself has plated, it is beautiful.
A price also thinks that it is good goods if it does not adhere to brightness since it is handy.
View detail