Reviews
Defective products are mixed in.
There are about 3 defective products out of 10.
Tail and Brake are mixed in with each other.
The unit price is low, so the rating is 2.
View detail
Matte Black is also a nice touch.
The Blinker that I used before is a Plating type. The Blinker that I used before is a Plating type thing and I liked it because it is Harley with a lot of Plating parts, but because Rust has increased, it is a change to Matte Black. It is a good feeling. View detail
Badly built and dark.
I installed a Yamaha TDR80 with 12V electrical system.
When I applied force to install it, the LED installation board part caved in and spun around in the middle of the Valve, damaging it.
The parts are only connected with a Glue gun, so it will come off with a slight force.
Fortunately, there was no wire breakage, so I was able to repair the part by putting it back in position and fixing it with instant glue.
It's bright, but honestly, it's dark.
The original Xenon sphere seems brighter.
The LEDs all light up, so it doesn't seem to be a defective product.
The power consumption is low, as you would expect, and there is no flickering with all the lights on as the Blinker blinks.
I plan to use it until I replace it with another high light one.
View detail
Fits: YAMAHA tricker, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650, KAWASAKI W400, KAWASAKI W650, YAMAHA SR400, YAMAHA SR500, YAMAHA XS650
Mounted on Kawasaki w800
I bought it to mount a bateslight on Kawasaki w800. The mounting difficulty is very easy and the light can be repositioned back and forth. There is no problem with the use, but there is some movement when the force is applied. View detail
Sufficient performance
I bought it as an OEM replacement.
It seems to be slightly brighter than the OEM.
It's been two years since the replacement and it's working fine.
Each part is well finished and can be replaced in Smooth.
View detail
It's not very flashy.
It's not as flashy as other recent LED bulbs, but it's the most stable and superior in terms of function and performance, and it's not fashionable, but it doesn't interfere with night driving. View detail
It's broken
After six months of use, the body has finished splitting in two from the mounting area
I changed to LED in order to avoid running out of bulbs, but I didn't expect the body to be broken
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Good product
It is not possible to install the separate handle without using the OEM Light Bracket It's not possible, so I decided to replace it
I want to use the type which is held by 4 pipes So I looked at various manufacturers' products, but they were more expensive than I expected
Personally, the finish is secondary to the cost of the product So I bought this one
About the product
It's the same color as the product image "The Color of THE Stainless Steel It's like
Personally, I'm a zero because it gives off an austere vibe
Parts accuracy is not a problem
As for the finish, the Band part is a little Bali?
It's not enough to cut your finger off
The most noticeable Pipe part is not scratched etc
By the way, there is no Instruction Manual
I'm fitting the OEM headlights and I haven't had any problems installing them
Good purchase
View detail
CostValue Good
? Off tail lamp is turned into LED by cutting off well on off-road
? Easy to install, light intensity is usually a little darker than the valve (About 20% reduction?) Is it acceptable?.
? It is a good choice whether to reduce the risk of ball depletion in off-road running, the gentleness to the battery with reduced power consumption.
View detail
nice parts!!
GOODS Pipe Light Bracket good price.. Attachment was easy and the circumference of Wright felt it refreshed. nice parts! View detail
Easy to install and easy to adjust
I bought this to install clip on hadle bar. Very easy to install. Very easy to adjust height. It was little hard to understand the instruction. View detail
Price is high but goods are good
Because I can install both 6 Bolt car and 12 Bolt car, I bought it for Yamaha For-Gel 50 but VOGEL can not be used because it is an exchange, so I used it for Yamaha SEROW 225. View detail
Size feeling exactly
Spec from Early Tail Lamp attached since we gave up 250 TR. Change.
Originally Frame processed, Bolt was stopped, so purchase this product of same Pitch, use only Tail lamp and Stay. (In my case it is different from normal way of installation. )
It is Kit which can be easily attached if it is Frame of NORMAL.
Size feeling is comfortable and I am satisfied.
View detail
Nice look, nice build
Easy to install, fits well on a Yamaha SR400, can be mounted in 2 ways (long brackets above or underneath) so you can position the headlight low or high depending on the position of your speedo. View detail
I do not have ChicaChica and I do not eat electricity.
Although it is to be said that, anyone can easily exchange.
When Idling, unstable brightness like OEM goes up and down and the brightness is more than enough.
From now on, it is LED.
View detail
Required brightness and power saving
Purchased for 6 VDAX Tail lamp with unstable power generation. Headlight got brighter on the surface after replacing ♪ The making itself is a bit sloppy, but it is not a problem in function. It's easy to install just replace the existing Lamp. View detail
It's quite solid.
Spec. I bought it to process and install UniversalTail by change. It is Reasonable, but it is quite thick plate thick. It is hard to process but it is sturdy. The paint is also Powder ?. It is like a strong paint film View detail
Blackout
Parts of ESTRELLA purchased in second hand purchase to make Blackout. It is cheap and the shape is cute with Small Type. The only difficulty is that there is no Grounding Wire, so if you can not get Body ground at the base of Blinker, you have to open the inside and add the Grounding Wire. It's a little troublesome..
View detail
Fits: Others SR400:SR500:250TR:ESTRELLA:GRASS TRACKER:W400:W650:TW:GB250:XS650 etc.
Motorcycle to Compact
You can move Blinker's position to the center of Motorcycle, it becomes Compact and it looks better. It is very simple as it is in design to hide Blinker harness. View detail
To change headlight
Change of Headlight is very easy. It is perfect for my taste as it can be mounted at a lower position. Because the paint is unlikely to peel off, Motorcycle is dirty, so only Bracket will float and it will look lol Cost performance High. View detail