Reviews
Fuse outage replacement
Fuse ran out, so this is a replacement and a spare.
The number of pieces and price are sufficient.
The remainder is kept for spares.
View detail
crimping
This is used for re-crimping due to Cable disconnection from the terminal construction part.
Single Item sales, not too expensive, so it is good for purchasing only the quantity you need.
View detail
Construction
Wiring is missing and used for re-installation.
Single Item sales are inexpensive, so you can buy only the quantity you need.
View detail
exchange
Since there was discoloration and deterioration of the used products as the terminals were reconnected, the Cover was also replaced with a new one while it was being used.
Since it is a Single Item sale, it is good for purchasing only the quantity you need.
View detail
Cover
When the terminals were re-installed due to wire breakage, the cover was deteriorated and discolored, so it was replaced with a new one together with the new cover.
Single Item sales and reasonable prices are good for those who want to purchase only the number of items they need.
View detail
Replace with new one
The Connector used was old and the claw was broken, so it was replaced with a new one.
Single ItemSince it was sold, it was a great help.
View detail
Power Supply Branch
Used for branching and connecting Power Supply Cable.
Single Item sales were helpful because I could buy only the kind I wanted.
View detail
Branch
Used for branching of Power Supply Cable.
Single ItemThey are sold and the price is not that expensive, so it was very helpful.
View detail
exchange
The Connector we were using was discolored and deteriorated, and was hard to detach and attach, so we replaced it.
It is sold as a Single Item, so I was able to purchase only what I needed.
View detail
Plating is Beauty, but durability is a problem
[How is it used?
I purchased this bracket to change to a bracket that can be directly attached to the front fork when converting to a front disc.
Was the one you received as per Image?
Plating is more Beauty than expected.
Was the installation difficult?
The fork is sandwiched with rubber to prevent damage to the fork, but the attachment itself is of the sandwiching type, so it can be easily installed without detaching the fork.
How was your experience with it?
I have used it without any defects, but it is easily distorted when force is applied due to interference, etc., so it is not strong enough.
[Included Parts:were they on?
Mounting Screw is included.
[Was there anything that disappointed you?
It is thin Steel, so its strength is weak.
The one made by ▼Posh is made in the same way, so we recommend this less expensive one.
View detail
Replacement and machining of aged Coupler
We decided to replace the 3-pole coupler on the Speedometer side, which had deteriorated significantly over time. In addition, I decided to take out the necessary wiring directly from the coupler to cancel the intermediate harness of the Shift positionIndicator, which was in the way. Since I had just replaced the 6V MONKEY/GORILLA Main Harness the year before last, the Coupler on the body side was in good condition, so all I needed this time was Female. Quantity:I was going to buy the Set stuff, but I found a product that was just the part I needed.
For the replacement work, the wiring of the old Coupler is cut off at the root, and when the terminals are newly installed, the wiring cut off from the middle harness is added to each terminal, and the quantity is changed from one terminal to the other.:I finished by plugging the terminals into the new Coupler so that the 2pc's Wiring comes out. Now I can connect the Shift positionIndicator directly without interrupting the intermediate Harness, and the Wiring of the Front is a bit Refreshing.
The body texture is not bad, so it can be used normally without any problem.
View detail
I bought as many as I needed.
We decided to replace the 9-pole coupler on the Speedometer side, which had deteriorated significantly over time. Since the coupler on the body side was in good condition, only the female coupler was needed this time. Quantity:I thought about buying a Set item, but I found a product for only the part I needed, so I bought this one. I cut off the wiring of the old coupler at the base, installed the terminals I bought at the same time, and inserted the terminals into the new coupler one by one while checking the color of the remaining wires on the old coupler. The texture of the body is not bad, so unless there is an Accident in the future, it will not have to be replaced until the car is scrapped. View detail
usually
I bought it for the cost and small space. It works fine, and the sound is lovely. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Light Bracket exchange
When I replaced the Blinker, I had to replace the OEM Bracket because it had a hole in it.
The work itself is easy, but the Instruction Manual is not included, so you need to check and replace it by yourself.
When replacing with OEMLight, the Light position is 1cm lower than OEM and 3cm forward
You can't use the Bracket for angle adjustment, so you have to make it yourself or fix it in two places.
Since the space between the Meter and the Light becomes wide, the mounting position of the Meter may be a concern.
View detail
It looks like a nice installation, but…
It seems to be able to be installed as the Title and the quality is good, but the quantity is Quantity:1 Set (Quantity):2pc. I thought it was a "Set" and set the quantity to 1, but what I received was 1pc. I should have looked carefully, but a note would have been helpful. View detail
SilverPlating has arrived.
I received the SilverPlating one, which is different from the product picture.
The finish is good, but the Male terminals I bought with it were GoldPlating, so they are not aligned.
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here. Since the 2. Fork clamp which a 1. fixing position can a
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here.
Since the
2. Fork clamp which a
1. fixing position can adjust easily is slim, the
advantage.
In a jumble, compared with
1.chuckbox, the bore diameter by the side of a too cheap (it is whether it is reasonably priced)
2. Headlight of the
fault with little admiration was M8, and since its own light was M10, it had to be processed by itself.
(Even if it extends, intensity seems to be OK well)
--
-- if the one where a Stay is longer is incidentally turned up, a light can be attached low.
Conversely, high mounted one is possible if it carries out.
If it says by force, I will want you to improve texture more.
.
.
View detail
Although it does not have a problem since the goods themselves are basic things ... A thread part and a connection section rust immediately. It rusted by neglect at the outside of one day... A recommend cannot be carried out to the direction which wan
Although it does not have a problem since the goods themselves are basic things ... A thread part and a connection section rust immediately.
It rusted by neglect at the outside of one day... A recommend cannot be carried out to the direction which wants for rust to dislike and come out [ direction ] and to always maintain a new article state finely.
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Attachment was easy and the circumference of Wright felt it refreshed.
Attachment was easy and the circumference of Wright felt it refreshed. View detail
It is used for 250TR. The size of this level thought just right kana, and purchased. Although I also regard other manufacturers' bates type light as that being right, since it does not enter at all, wiring needs in a headlight processing of the co
It is used for 250TR.
The size of this level thought just right kana, and purchased.
Although I also regard other manufacturers' bates type light as that being right, since it does not enter at all, wiring needs in a headlight processing of the connectors which were in the headlight from the first.
Since it hardly runs night, it does not understand, but since it is not a high wattage specially, either, I think that brightness is common.
The blue lens which shines in the upper part of a main part when a high beam is used is attached.
Since wiring which has come out of the main part is unreserved wiring with a color, I think whether it should cover with a corrugate tube etc.
It is not the elaborate structure, since it is necessary to unite packing and direction of a lens and to bind the cover of an outer circumference tight once it takes a main part into pieces, it is extraordinarily slightly troublesome, but since the thing itself has plated, it is beautiful.
A price also thinks that it is good goods if it does not adhere to brightness since it is handy.
View detail