Reviews
Same Quality as OEM Product
This is the same quality as the OEM Product, installed on an external Seat that uses the OEM Mount base. The position of the holes, etc., are exactly the same as the OEM Product. View detail
It is made the same way as OEM.
It is made the same as the OEM SeatMounting Bracket and was used on an external Seat that uses the OEM Bracket. View detail
Compared to OEM
The OEM was worn out, so I replaced it with a new Seat, and the pitch is perfect, so no modifications are needed. View detail
I am fully satisfied with the product.
I bought and installed it as a Mounting Bracket for my Daytra 70sSurfLightSeat and it is no different than the OEM Parts. View detail
Sr 400
The product is very satisfied, the quality is very good, the delivery is very fast, there are many products I want to buy, and I will definitely help in the future. View detail
Positioning change
ESTRELLA CUSTOM in 2004.
With SeparateSeat, the slightly forward leaning posture was painful and was changed along with Handlebar.
Installation was easy and quick.
The OEM retro feel was drastically reduced, but the footing was a blast.
With no Spring, I was prepared for a sore butt, but it is almost as good as OEM and so far no problems.
I thought it would be plain and tasteless, but this was GOOD.
View detail
Fits: YAMAHA SR400
First experience with Tuck Roll Seat.
Seat is a little stiff, but I think it is ideal for long distances.
The look and feel of the product has changed dramatically, and I am very satisfied with the large size.
View detail
Different from Image for my Motorcycle.
I had a hard time deciding between the various Seats, but I bought this one, which is a bit cheaper.
As a result, it was not the ideal Image for my Motorcycle, so I installed it once & ran it but replaced it immediately.
Also, I think the balance is somewhat bad because there is a gap of about 1 to 2 cm between the tank and the tank.
I think the leather and comfort is not so bad, so it depends on the person's MotorcycleCustom Image, etc.? I guess it depends on the person's MotorcycleCustom Image.
View detail
On a 5-inch Seat.
One of the few Seats that can be pontooned onto a Type 5.
It is nice that there is no gap between the OEMTank and the OEMTank.
Seat is stiffer than OEMSeat and has better footing.
The heels of both feet are sticky.
Installation was easy.
I also expect Seat to be durable.
View detail
It was easy.
I put it on Seat's Accent.
It is not something that works, but it is a little Retro.
View detail
Good to F-Two.
I had installed the OEM Lowdown Seat by transferring the parts from the Normal seat for now.
However, the SeatMounting Bracket was a little distorted because the Normal seat had been used for quite a long time, and there was a little gap between the front end of Seat and Tank.
This SeatMounting Bracket is cheaper than OEM parts and there is no problem about the installation, no more gap between Seat and Tank.
View detail
It may look like it, but it's not Cushionable.
The OEM seat is included with the seat and you can use the OEM Tandem seat brackets. The screw holes are exactly the same.
The quality of the seat itself is as good as OEM. The quality of the seat itself is the same as OEM, I don't think it is more luxurious. The OEM seat is much softer and more comfortable. The OEM seat is much more soft and comfortable. I thought that Tandem would be more comfortable than OEM because it is double seat, but if it is this hard on driver side, OEM might be more comfortable. (I'll Tandem it soon and see what I think)
View detail
high quality
It's the best Design ever made for SR!
The brown leather tone is not cheap and matches the classical design.
It is easy to install and even a beginner can replace the OEMSeat in about 5 minutes.
As for the ride quality, I had the impression that it was surprisingly hard.
Compared to OEMSeat, it has less cushioning, so the vibration is transmitted directly to the body. But I don't mind it because I think SR is like that.
It was not a cheap purchase, but I was able to get as close as possible to my ideal SR, so I am satisfied with the Large variant.
View detail
Refresh the part you can see, but don't care much about!
Because the OEM Product is discontinued, I purchased it.
Size measured. 28mm in width and 3.5mm in thickness
It was
OEM Product is 26mm wide and 4.1mm thick
The thickness of the belt is becoming thinner, and of course, it needs to be adjusted to the original for processing.
View detail
i'm here for chic
I was not satisfied with the mounting method of the Saddle seat, so I tried several companies, but this product was the best I'm very happy with it, although I don't have the spring, so I can't say that it's comfortable It is
The price seems to be too high for Parts Structure
View detail
Seat does not fit 2015 SR400. Shocking customer service. Messages are not responded to and import excise duty vert costly. The quality of the product was poor and I could have got a better seat from eBay that correctly fitted for half the price. I Will no
Seat does not fit 2015 SR400. Shocking customer service. Messages are not responded to and import excise duty vert costly. The quality of the product was poor and I could have got a better seat from eBay that correctly fitted for half the price. I Will not buy from here again and do not recommend the product or the site. View detail
If you aim for Cafe-style ...
The making is solid and proportionate. The size and shape of Seat also match W800.
Just because it was for W 650, if you think that you can attach it, you must change the position of BodySeat lock under Seat to Large.
If you install Bracket well by yourself it will also take Seat Locks without problems.
I put out the color for painting.
It feels a bit stretched but it is a good feel Seat Cowl ★ It is 4 ★.
View detail
I think that it is the best for using a Chopper by a Bolt on.If it combines with the Rear-fender Tank of GOODS, a Line having no Frame processing and beautiful can be taken out.But [ for the first time ] it has equipped easily.
I think that it is the best for using a Chopper by a Bolt on.If it combines with the Rear-fender Tank of GOODS, a Line having no Frame processing and beautiful can be taken out.But [ for the first time ] it has equipped easily. View detail