Reviews
Same Quality as OEM Product
This is the same quality as the OEM Product, installed on an external Seat that uses the OEM Mount base. The position of the holes, etc., are exactly the same as the OEM Product. View detail
It is made the same way as OEM.
It is made the same as the OEM SeatMounting Bracket and was used on an external Seat that uses the OEM Bracket. View detail
Low-profile License Plate Base
[How is it used?
If you have a Fender Eliminator, there is a risk that the License Plate may bend, so we purchased a base plate as reinforcement.
Was the one you received as per Image?
The quality is not bad, but since it is FRP, strength needs to be taken into account to a certain extent.
Was the installation difficult?
It is easy to fix by simply clamping it onto the License Plate.
How was your experience with it?
Quantity:Pair (for Left and Right) The reverse side is attached with Carbon Seat, and the other side is attached with Carbon Seat. [Color] Clear is blown on it so it seems to be easy to clean.
[Was there anything that disappointed you?
It is thinner than you might imagine, so it is likely to be cracked by a Damage that hits it. It is a reinforcement to prevent the License Plate from bending.
View detail
Compared to OEM
The OEM was worn out, so I replaced it with a new Seat, and the pitch is perfect, so no modifications are needed. View detail
I am fully satisfied with the product.
I bought and installed it as a Mounting Bracket for my Daytra 70sSurfLightSeat and it is no different than the OEM Parts. View detail
Appearance Carbon
Quantity over FRP:Carbon board with 1pc.
Still, it serves well as a License Plate Holder, so there is no problem.
Glimpses of Material:Carbon Style is Fashion?
View detail
Material:Texture is improved to Large width from PlasticCap!
I ride a 1JR SR400 and have been using a MotorGarageGoods TeardropTank for about 10 years now and have been wanting to switch to a Gold Genus Cap at some point.
One-off on social networking sites (One item) I had seen some stories about people who made Gold caps in the Shop, but I had not taken the plunge due to the cost and hassle involved.
I was worried about the design and color, but the original resin cap is sometimes difficult to open, so I decided to go with the cap with more serrations in the design, thinking about when I turn it to open it. I was worried about the design and color.
Material:I am very satisfied with the quality of the plastic cap. The packing of the plastic cap was made by Cork and I liked it so much that I transplanted it to the Material which I had purchased at the same time because the size was too small and it fell out every time I opened the cap.:Changed to RubberPacking, like CorkPacking. Taste I think Rubber is better for Packing's original function.
Still using the company's Tank and still Material:I think this product is a recommendation for those who use PlasticCap. This is more convenient for opening and closing the tank.
I seem to remember that this short Hose was also purchased from webike before.
I think the satisfaction level after installation is very high for Owner, and the manufacturing and texture are good for the price, so I think the cost performance is also good.
View detail
ERO’LIP License Plate Bolt
Mounted on 2018 FLHTKSE
Nice! Easy to install
Stylish to look at.
Burlesque Red and NeonPink
Quantity:Pair (for Left and Right) I chose a different color. 1pc. is too expensive at about 4,000 yen, but …
It seems to be handmade by craftsmen, so it can't be helped.
However, it is well worth the price as it is beautifully made.
My friends wanted to copy it and several of them bought it right away!
https://ameblo.jp/keikocookingchicken/entry-12792830648.html
View detail
Good usability.
We are using YAMAHA's XV750E to customize it in Cafe racer style.
We have used it several times in the past and it is easy to use.
The surface texture had changed from when I bought it about two years ago, perhaps the lot had changed.
What was smooth seems to have become a thing with faint cutting marks visible.
For general products or dress-up parts, this would be considered a decline in quality, but not for this WELD color.
In the first place, I believe that the quality has been excessive so far because of the welding premise and the painting premise with fabrics that have no surface treatment.
……, I mean, the weldability is definitely better now.
Of course, dimensions, etc., have not changed.
Since it is made according to the dimensions of the JIS standard for cap bolts, a commercially available cap bolt will fit in Beauty.
I used Chromoly's strength category 10.9Bolt because I used it for the seat rail mount, but of course it is JIS standard, so it fit in Beauty.
The thickness of each part is just right, so it did not melt off even with amateur potato welding as shown in the picture.
Personally, I would like to see M12 Lineup as well.
View detail
Ready-made Psycho
I used it on my XV750E Custom.
We have been using for M10 and others for some time.
I am currently rebuilding the Seat rail, but it is taking too long to cut out and make all the fine brackets and such.
Also, since we have to deal with limited facilities, the quality of each product is less consistent than that of a manufacturer's product.
In my case, I can only use a ball machine, Leutor, and Belt Thunder for cutting, so I cannot do beautiful perimeter machining or precision counterboring no matter how hard I try.
It is difficult to make many pieces of 50 series Aluminum alloy Gold, but it is difficult to make many pieces of Steel.
It was at this time that I found this WELD color made by MOTOR GARAGE GOODS.
Since we only have MIG welding equipment, it had to be steel, and we wanted it to look PRO, so we always wanted to do a counterbore and embed a cap bolt in it.
It is a perfect product for this application, and each size of M6, M8, and M10 can be selected. The number of pieces is also available in Single Item and Quantity.:You could choose from 1 Set of 10pcs.
Each size is in accordance with the JIS standard for cap bolts, so commercially available cap bolts will fit in Beauty.
With this spec, there is no need to fashion a taper cap bolt, etc., and a cap bolt sold in the market can be used.
I needed the strength, so I looked for and used Chromoly (SCM435) Bolt just in case.
If I may say so, I would be very happy if a lineup for M12 is added, but I wonder if there will be more now? I'm not sure if there will be more now.
The thickness of each part is just right, so even my amateur welding does not melt down, and weldability is excellent.
View detail
It would be helpful to have these components available.
It was used to Custom XV750E.
When rebuilding a seat rail, welding work is required, but if you start building it piece by piece, you will never finish.
We also work with what is in existing products in each section.
In addition to the SteelTallNut, we also use WELD colors and SteelTab for Welding.
Since Steel is dared to be Lineup instead of Stainless Steel, it is quite useful for people like me who only have MiG welding.
If we had TIG facilities, we would like to make it in Stainless Steel, but we have no choice because we only have MiG.
Although wires for Stainless Steel are also available, we have heard that the blending is questionable, so we have chosen to use Steel for this project.
This product is named TallNut for WELD, but I think it is generally called round boss or Pipe nut.
The wall thickness is just right, so welding with Pipe was easy.
I'm an amateur so if it's too thick it's difficult to differentiate between blending with Pipe……
I purchased M8, but since each size is sold, I would like to purchase M6 when I make Fender mount.
View detail
RearRefreshing
OEM was good, but I took the plunge. The quality and appearance were good. The only thing is that it came with an installation manual, but I didn't understand it very well and finally installed it after looking around for a video on the Net. View detail
Fits: YAMAHA SR400 (FI model is also available), YAMAHA SR500 (also compatible with FI models), YAMAHA SR400 (FI model is also available), YAMAHA SR500 (also compatible with FI models)
GOODS Pipe Work Front Fender Kit - 1980 SR500 19 inch wheel
Seems to be very well made. Very sturdy stabilizer. I feel like the fiberglass fender could've used a few extra plies to make it thicker. I was able to snake the stabilizer into position without taking apart the front wheel. I first positioned the stabilizer only between the front forks and attached the fender to the stabilizer afterwards. I used blue Locktite to on the screws that attach the fender to the bracket. The bike has a left disk brake, and there was no interference with the brake caliper. View detail
Good looking, good price
If you are worried about ETC placement, this is a must-recommendation.
I think it is easy to use.
View detail
Don't ever make a purchase possible!
SSK's product was also Large outlined, but
The only thing I managed to do when I roasted it with a heat gun was to
This can be seared to death and bent in the opposite direction of distortion.
The distortion will return to its original distorted state and the distortion will not be corrected.
Also, the product image looks like Carbon.
The back side was FRP with a dirty finish.
View detail
Sr 400
The product is very satisfied, the quality is very good, the delivery is very fast, there are many products I want to buy, and I will definitely help in the future. View detail
Positioning change
ESTRELLA CUSTOM in 2004.
With SeparateSeat, the slightly forward leaning posture was painful and was changed along with Handlebar.
Installation was easy and quick.
The OEM retro feel was drastically reduced, but the footing was a blast.
With no Spring, I was prepared for a sore butt, but it is almost as good as OEM and so far no problems.
I thought it would be plain and tasteless, but this was GOOD.
View detail
Fits: YAMAHA SR400
First experience with Tuck Roll Seat.
Seat is a little stiff, but I think it is ideal for long distances.
The look and feel of the product has changed dramatically, and I am very satisfied with the large size.
View detail
Reinforcement
I had bent a License Plate once, so I installed it for reinforcement purposes, and it worked perfectly.
I used double-sided tape and laminated it with Number, and so far it has not peeled off.
View detail
Different from Image for my Motorcycle.
I had a hard time deciding between the various Seats, but I bought this one, which is a bit cheaper.
As a result, it was not the ideal Image for my Motorcycle, so I installed it once & ran it but replaced it immediately.
Also, I think the balance is somewhat bad because there is a gap of about 1 to 2 cm between the tank and the tank.
I think the leather and comfort is not so bad, so it depends on the person's MotorcycleCustom Image, etc.? I guess it depends on the person's MotorcycleCustom Image.
View detail