Reviews
Fits: KAWASAKI 250TR
Large satisfaction with sound and ease of installation work.
After I got my motorcycle license, I bought a motorcycle for the first time and I got used to driving it, and I was not satisfied with the normal muffler anymore. I bought it because I thought it would be easy for me, a beginner, to install. The installation was easy and the sound of the Exhaust System is great and it makes it even more fun to drive. View detail
42.7mmPipe Clamp
I purchased this product to make an exhaust system for my YamahaXV750E.
42.It is used for Clamp when assembling 7mm Exhaust pipe.
The actual Pipe outer diameter is 45mm since it is used on the assembly side.
It is a very ordinary Stainless Steel Exhaust Band, but I chose it because of its claim that it is SUS316, which is more corrosion resistant than the common SUS304.
I would expect high corrosion resistance, as OEM exhaust bands on older motorcycles often stick or decay due to rust.
It would be great if you could keep it clean to look at since the Band will be in a position where it can be seen from the outside.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400
SR500 (1980) Tapered Cone Slip-on Exhaust
The bike used to have a generic cheap muffler installed which got super loud as soon as I opened the throttle. The bike didn't come with the original exhaust so I don't have a basis to compare to that. The bike has a VM36-4 carburator with pod filter installed. The installation was very easy. You'll need to re-use the old muffler bracket (p/n 3HT-14771-00-00) and the bolt that goes on the R/H rear foot peg. The exhaust noise became a lot more smooth but with nice single cylinder pop when the throttle is opened. My old exhaust was giving me quite a bit of decel-pop (after burn) when decelerating, but after installing the GOODS muffler, the decel-pop completely went away! The response feels a bit smoother now. Also, the lower end torque feels stronger. The world seems a bit brighter now, and I have a better outlook on life thanks to this new exhaust! ...at least when I'm riding the bike. View detail
Great exhaust for SR400
This is a great exhaust for SR400. Not too loud and it sounds great. I'm sure you could make it louder if you wanted by taking the packing out but I think it's great how it is. View detail
Exhaust SystemBlack since I purchased it.
I installed a black exhaust system, but the exhaust pipe looked like it was floating, so I bought this. When installing it, you need rubber gloves because it is prickly. View detail
SR400 2014 FI
Super silent adapts very well in output.
Do not use exhaust paste it is useless.
I strongly recommend the installation of the AIS blocker which avoids a flame at the outlet of the silencer. -------------------------------------------------- -------- Super silencer adapts very well at output. Do not use exhaust dough is useless. I highly recommend the installation of the AIS blocker which avoids a flame out of the silencer. Powered by Google Translator
View detail
Fits: YAMAHA V-MAX 1200, YAMAHA SR400, YAMAHA SR500, YAMAHA XT500, YAMAHA YB-1
I always use it for SR400.
No exhaust leaks and no complaints about quality. View detail
Exhaust Bracket for SR400 FI Vehicles?
SR400 1JR (1995 model) I purchased the bracket for the "BALI" but was not able to install it.
The OEM parts number varies depending on the year, but I thought it would probably be possible to install, but I should have checked better.
The reason for the high rating is because of the good workmanship of the GOODS products and the speed of shipping by Webig.
We strongly recommend that you check the square shape of this product carefully before purchasing it.
View detail
No Color, comparable to OEM, and good cost performance.
I chose this product because of the price, but I was worried about the appearance and fit, but it looks and feels perfectly fine. The price is very reasonable. I am glad I chose this product. View detail
Fits: YAMAHA SR400, YAMAHA SR500
It's a really nice muffler!
The tone is good and the hand feel when you roll the throttle is really good.
It's not too loud when idling, so it's nice to be invisible when warming up!
In Korea, it is possible to easily change the structure by entering within the 105DB standard for structural change!
Highly recommended if you have a muffler plan! ------------------------------------------------------------ -------- The tone is good and the taste of the throttle is great. Do it!
If you are planning a muffler, we highly recommend it! Powered by Google Translator
View detail
Fits: YAMAHA SR400
GOOS for SR
I wanted an Exhaust System for my 2019 SR400, so I replaced it.
It was not a Japanese Vehicle Inspection Correspondence, so I removed it immediately.
The volume is a blast of sound that only a single cylinder can produce. () It is
I was not satisfied with the OEM Exhaust System as I could only hear a little sound.
The sound is not that loud and pleasant when you turn it.
I was not sure about DAYTONA, but I decided to goos for SR400.
Recommended
The price was a little steep, but the workmanship was real!
View detail
Beautiful.
First of all, the exhaust pipe has a beautiful curve, and it uses the same mounting bracket as the OEM one, so it is shockproof and looks good. I'm not sure about the performance... View detail
I'm so happy with it!
[How is it used?
Mounted on 250TR
I was really excited about this because it would be my first Custom-like Custom.
Was the one you received as per Image?
It looks beautiful and I love it.
I waited about two and a half months for delivery, but it arrived slightly earlier.
Was the installation difficult?
Installation was easy
It was difficult to install the exhaust pipe and to remove the stuck exhaust gasket because I changed the stainless exhaust pipe of for OEM which was sold on Yahoo!
How was your experience with it?
At first I thought the volume was quite large, but once you get used to it, I think it's a good large volume.
I like the crispness and power of the Sound when Idling.
There is also a lot of power in the volume when accelerating, but I think this can't be helped with the low Engine Displacement Volume because the sound connects quickly.
[Included Parts:were they on?
It came with a mounting bracket and a simple Instruction Manual.
View detail
Exhaust System replacement!
Powerful Sound and Power also went up.
I really like the design and the ease of the replacement process.
View detail
I changed the Exhaust System.
A friend I ran with complimented me on the Sound. I like it because it looks good too. When I ordered it, I was told that it would take about two months to deliver, but it took about three weeks, and as a result, it arrived quickly, which was good, but it would be helpful if the information was more accurate. View detail
Very good
Not to mention the sound, the stability of the start of the ride and the comfort of the ride and sound from mid to high RPMs doubled the enjoyment of the ride. The appearance of the bike was refreshed and became cooler, and I'm very satisfied with the Large.
View detail
Compact and good!
It is used for the connection between the front pipe and the rear part of WR250X.
Stainless steel is resistant to rust, but the screw part is easily burned by heat, so it is recommended to apply an anti-carburizing agent such as Copper to the screw part before use.
View detail
Retro style and cool
Normal silencer is installed, but it can be installed without any problem right underneath 。 The best thing is that this Retro style exhaust pipe is cool and has a good burnout It's hard to say I feel like the ride has better acceleration from mid-range 。 Next, I plan to put on the Silencer from Peyton Place (I've been using it for some time now.) View detail
Fits: YAMAHA SR400, YAMAHA SR500
I'm satisfied
I installed it on Initial Model SR400
I wanted to build a classical cafe racer and chose this exhaust pipe I did
The beautiful curves of Hand Bent are just mesmerizing to look at
The accuracy of the product is good and I am satisfied with the purchase of the Large
View detail
I'm not sure if it's hard to wrap it up …
Purchased to replace the sound deadening material of Silencer by Toshi TEC
Toshi TECSilencer has a dual structure
Punching pipe is wrapped with Stainless Wool, and then Glass Wool is wrapped with Roll
Stainless wool becomes thinner when it is spread out
It's difficult because it's the first time I've wrapped sound deadening material, so I just don't have any experience with how much to wrap it
Material was a good product
View detail