Reviews
Hose replacement is a pretty good money maker
I thought about assembling it from scratch by myself, but it was too much of a hassle to get the parts together, so I gave up
I was allowed to use a cut off ready-made product I feel a sense of accomplishment when I can measure the front of the car and make it look nice is to STAND to raise the front wheel and put the protrusion back in and use the taco string to give it a little more room I measured it by holding it up
View detail
Firm Touch
I purchased a Large Hand Manufacturer's Hose because it is a Brake part
The fittings are made of Stainless Steel, so it is very durable, and I like it a lot We are
This is for off-road motorcycle so it has a Teflon tube for It's a good point that I'm doing
View detail
My staple items
It's always this one because there's no reason to use anything else
I wish they were available in 10mm increments if you want, but contrary to speculation, I'm not going to stock them It looks like you're shaking it up Maybe it's discontinued?
It's a bit of a shame because the price is twice as high with the Order Made system
View detail
I like the luxury of not being too flashy
It may seem like the order is reversed, but Other Brand Product's low Flat STD of the custom Yamaha MT-01 in Handlebar I bought OEM Length for the vehicle type Kit to return to the Handlebar
Stainless Steel Silver and [Color] I thought Smoke's Hose color was not flashy, but it was nice and luxurious
The quality was not a problem, of course, and I was able to install it according to the instructions If you're not confident in the work you're doing because the location is just Brake, I'd suggest hiring a PRO
If I had to choose, I would say that it is just barely long enough and there is not even a centimeter to spare There was no inconvenience for me to use and run the bike, but it is better to handle it loosely or a little more If you want to upgrade the Handlebar, you should order a suitable length
I had an Other Brand Product FFender on, but it was too wide This may be why Hose interfered with the OEM LengthKit In fender, it was Large sturdy
View detail
Fits: HONDA NSR80, HONDA NSR80, HONDA NSR50, HONDA NSR50
Easy to control
The Pedal is very responsive and easy to control subtly
I use the rear brake a lot in both city and mountain passes, so it's very good
View detail
Fits: HONDA NSR80, HONDA NSR50
Pushing to Pushing Brake Fee Ring
Since the OEM Brake hose was worn out and worn out, we changed to Stainless Mesh Replacement
I didn't want to look like I was changing anything, so I chose Black
Banjos are also unified with Black Stainless steel
It's good to be a pushing Brake Fee Ring
View detail
Not available
I bought it by car model, but with OEMHose and shape ? Different lengths and dimensions are not at all. Hose is likely to break when attaching forcibly and because the Hose length is too long longer than the proper dimension, the peripheral portion interferes with Hose when the RearSwing Arm goes up and down, so it is scary as it approaches the Mud Guard and Exhaust System, especially Brake rotor.
I have done more than 9000, but I do not feel like using it. Things like gold discarded in the dob. Eventually we ordered Swageline's dimensions with other mail order sites.
View detail
I am tightly done..
The 14-year-old Grom will soon be running 30,000 km, NORMAL's Hose came, so I decided to exchange Hose as a doubler as Overhaul. Since it is an important security part, I asked Shop to exchange Overhaul and Hose. I searched for Kit according to vehicle type of Stainless Steel Footing which is reliable in terms of strength. I chose this product because it was cheap in price. Because I made Hose a Smoked color, it is inconspicuous, so I make a self-assertion by making Footing a Stainless color. I was able to install without trouble in handling and length. After exchanging, I tried about 50 kilometers but Touch got better and I can do what I wanted. View detail
Touch has improved.
The 14-year-old Grom will soon be running for 30,000 km and Normal brake hose gets caught up and I can not stand being Touch becoming Funafuna and I decided to exchange Hose according to Overhaul of Brake. Since it is an important security part, I asked Shop to exchange Overhaul and Hose. I tried running about 50 kilometers, but as expected the Touch of Stainless mesh hose is tightly able to do the desired Breaking. Stainless Steel Because the price was cheap among floating, I made it for this product was the correct answer. Picture shows NORMAL and those after this product exchange. Because we changed Swing Arm and made it to Rear Sets, MASTER side handled Banjo from the outside of the Brake switch by inverting Banjo, because Hose is hitting the Exhaust System in the same way as NORMAL. View detail
It's not like this type of car!
If you make it by car model, you can use the OEM line without waste! TJoint do not need it! Small monk, it's awful and you can not fix it to Stem with Tie Wrap! So after purchasing Banjo bolt or Adapter or For Left Caliper's short Mesh hose bought and bought it was expensive!
I knew that performance was good because it was long time ago!
In such a case Rose got it all together!
Well, the surplus Mesh hose can be attached to Rear. If you receive it.
View detail
The texture is also satisfactory.
Braking force depends on Pad, so it will not be improved dramatically, but Touch will be better than anything. If NORMAL's Rubber hose expresses chillly, Mesh hose will feel like Snap. Also, the instruction manual was easy to understand, and installation was not so difficult to feel. However, when installing as others wrote, I need Spanner No. 11 and Banjoetc. It is necessary to apply Molybdenum grease to the junction of. I think that it is better to prepare in advance. Also, because it is an important security part Torque wrenchetc. It is safe to manage Torque at. View detail
Do not expect a dramatic effect
Ninja250 (EX250L) We installed in KRT Ver,.
When converting Front caliper to brembo 4pot, we changed it to tweed.
So the degree of the effect as a single item is ...?.
I feel that compatibility with ABS does not have much influence.
Fee Ring (Touch) Is the same as NORMAL.
As usual I am not shy, there is a feeling of Bunibuni.
However, I think that the effect of Brembo caliper is compatible, but the effect is
It has changed a lot.
When I started squeezing Lever with my usual feeling, I sinked quite well into Large eyes than usual.
This effect increases security.
It seems like the benefit of 4pot Caliper is Large.
But I wonder if that Bunibuni feel will change unless you change MASTER..
Let's wipe the Brake fluid to the bean, whether it is a cautionary point of replacement.
Yellow I have written "GOODRIDGE" and "ACTIVE" on a color Tube, but it leaked out
Oil was applied and the letters disappeared.
I know that "parts used for such a place", Ink is also a Brake fluid
Using a special Ink or Print that will not come off!
Also, set Instruction Manual to Color!
Because it is mono black printing, the image is also mono black, but it's just a black part so it's black
Even if you look at the picture it is hard to understand.
Clamp in the middle is not even a picture. Do you think yourself?
The connecting part on the Caliper side is inclined about 15 °, but this may be straight
If it passes through OEM 's ClampHose it unnaturally inflates at this Slant angle.
Although it is said to be exclusive items by car type, it is not perfect.
If this is enough it will only feel enough to change Caliper..
Since it looks like a Custom feeling, Merit is only that point.
View detail
The goods themselves are certain buildings as expected.
Fifteen years have passed since the previous Brake hose wears and replaced with Renewal, we changed Fitting from Aluminum to Stainless, Hose from Clear to Smoke, and Line picking from Bipyce to Tripeace.
There is no change in Brake 's Touch itself, it is Large that the sense of appearance is beautiful, that the sense of security has increased with Fitting becoming Stainless.
However, I was planning to measure the Length well when ordering, but it is somewhat too long (25 mm long) I have decided to purchase a new one because the return period has passed.
(* ≧ ∀ ≦ *)
I wish you could set the return period a little longer.
We recommend that you temporarily assemble it as soon as you measure and measure the length by yourself.
View detail
Suspension tightens.
Changed in Timing of Brembo caliper exchange. BrakeTouch improved, look better as well.
Installation etc etc. There is no problem in particular.
View detail
Purchase at Sale
In a word it was cheap.
Originally Black I was planning to buy it but it got pretty cheap at Sale and hurriedly Silver black
Performance is the same product so it does not change at all but the price is quite different. Actually I thought that Color itself was beautiful and good shopping was available even if it arrived at hand
I think that there is no problem at all as it was Goodridge before
For the time being, I think that there is no replacement, but when buying BreakingLine I am a Goodridge
View detail
I'm happy for the old car.
I used it in the Model 96 RGV-& Gamma;.
I bought the brake hoses I was using before because I was worried about the deterioration of the brake hoses on the circuit.
I didn't expect them to have products for different models of motorcycles as this is an old motorcycle, but they were very helpful.
I drove it on the track right away and it brakes well and is safe to drive. For those of you who drive old cars.
I'm very happy for you.
View detail
I am happy with the old car.
I used it with 96 type RGV - Γ.
I thought that the brake hose I was using was also degraded over the course of years and I purchased it because it is uneasy on circuit running to drifting.
Because it is an old Motorcycle, I did not think that there are goods by car type but it was very helpful to have a dedicated item.
I got on the circuit at once, but I can brave firmly and run with confidence. To those who are riding in old cars
I think that I am very happy..
View detail
Bolt-on Kit by vehicle type ???
Product creation etc.. I think that it is solid..
However, despite singing as a vehicle type Bolt - on Kit,
I will not do it properly as it is.
I do not know whether the design of Kit is sweet or a strategy for buying additional parts,
If you come to a vehicle inspection in this Kit only condition, I (Ex inspector) If it is not conformity certificate.
Is Motorcycle supplies such a thing natural?
It happens to be only for our model.
I think the product itself is not bad.
View detail
Besides Master's side Banjo is better
Banjo on the MASTER side is straight and can be installed, but I bought it separately with angles.
Other than that it is Large.
It is very easy to handle because the amount of grasping the Brake lever and the strength of grasping Brake are proportional.
View detail
it is normal.
NORMAL's Hose used for 30 years deteriorated, so I changed sweat on the surface of Hose even in winter, so I replaced it. Because it made it to Stainless fitting and Black coat, it is good without being noticeable strangely. Length is also exactly good, you can wear it without removing the NORMAL Steering Damper. View detail