Reviews
Review of the replacement of the size up from L to XL.
They are a replacement for Goldwin Mesh Gloves that I used for several years.
The old MODEL is L Size but I was a little concerned that the wrist portion was a little short.
This time, with the MODEL of item number:GB64180. XL】 【XL I bought it sized up to
The wrist fit just as I wanted, but the extra length at the thumb was a little too large.
It is a bit of a concern, but I think it will go away with familiarity and use.
The design has also changed from the old model, which had a slightly extravagant feel, to a more refreshing design, which is also a replacement.
This was the motivation for the
View detail
I am moderately satisfied.
Summer Mesh Gloves are made by Goldwin in L size
Again, I purchased the L Size.
This is a comparison with DAYTONA's winter gloves made of goatskin leather
The previous Gloves would get cold at the fingertips after a few hours of riding, but they were still usable in temperatures in the single digits and even below freezing for short periods of time.
However, due to my sweaty hands, it was uncomfortable because the steam never escaped, so I purchased this product made of Gore-Tex, which is moisture permeable.
Here are my impressions after two hours of running in temperatures ranging from 3°C to 7°C
Grip when fitted at home. (make it goo) and I was worried that Knuckle protector would feel like it was sticking and would hurt while driving.
When I actually used the Knuckle protector, I found that it was designed to be optimized for the shape of the Grip when I held it, and the Knuckle protector was ExactlyFit and there was no pain.
The operation is better than the previous Gloves, fabric? Leather? The leather is thicker than the previous Gloves, so I felt that I needed to get used to the larger size overall.
In some cases, Lever's distance adjustment may be necessary
Thumbs are easy to move so it is easy to operate Blinkretc.Switch
As for protection from the cold, the fingertips get cold rather quickly.
I think it would be tough to use in extremely cold environment because Manufacturer's product description doesn't describe it as cold proof.
As for steaming, it was steaming in its own way, but it didn't get soggy.
I have a shield wiper on the side of my left index finger, but I think it is polyurethane, so I am worried that it will fall apart due to hydrolysis.
Overall, I am fairly satisfied with the product, and since it is not inexpensive, I hope I can use it for a long time.
View detail
This is good.
Product Name
GOLDWIN Goldwin Cordura Enduro Gloves GB63381 Fall/Winter ApparelOutlet [special price]
Item Number
GB63381
Vehicles
Hand Size Standard Male
Number of man-hours
5 minutes
Required Tools
Scissors, etc. would be perfect.
Why did you choose this product?
I wanted to try it because it had a good reputation and the article was well made.
Was the one you received as per Image?
Design was as per Image.
Was the installation difficult?
The ease of application may be due to the fact that it was developed for Off-Road.
How was your experience with it?
This is good. Even at the end of the day when I was losing my grip, I didn't feel my arm lift with this on. I was able to perform detailed accelerator operation without losing the feeling of control.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
It can't be helped, but when it's cold, it may be tough because it's thin.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For commuting. Gloves that are warm and don't let cold air in.
I am replacing my 20 year old Thailand Chi winter GORE-TEX Gloves. The cold air started to enter through the seams and the insulation was no longer effective.
I had been using Thailand Chi Gloves in May, and since the inside of the Gloves were not stuffy, I decided to use Gore-Tex for the replacement requirement.
Measure the actual hand and select Size4, one size larger than the value.
When I first put my hand in, I had the impression that Inner Gloves were not possible because of the feeling of pressure on the back of my hand. The length of the fingers was appropriate, neither too long nor too short, although there was a sticking feeling around the instep when I clenched my fist.
We ran several times at around 10 degrees in Review.
Depending on the temperature and sunlight, these Gloves will get me through the winter.
It was a cloudy day with lingering snow on the shoulder and my hands were getting cold. The conditions were nsr250r at a high pace for about an hour. In the mountains of the Chugoku Mountains.
I tried it on a warm day, but it was hot. Still, my hands don't feel sweaty, so I believe it's thanks to the Gore-Tex.
So there is no problem with the feel of the operation. The Size feeling that I was concerned about does not affect the Lever operation. If it doesn't bother me, I think it is well made.
View detail
New winter gloves!
New Gloves for winter!
I have Goldwin uAirs, and the winter gloves I bought 5 or 6 years ago are thicker and a little less maneuverable.
I also purchased this product because it does not come with a protective cup for protection.
Size 2 is just the right size for my М size. Yesterday was the third time I used it, and it has become comfortable on my fingers.
I like it because it is easy to operate, has good protective functions, and has an anti-vibration pad on the palm side.
It also has a snow-like Design Mark and has become one of my favorite gloves.
However, I will give it 4 stars because I have to pinch my fingertips a little when I remove the Gloves because the inner Inner almost comes out a little when I remove the gloves.
View detail
It is safe.
Was the one you received as per Image?
Yes
[How did you feel about the Fit?
SizeM is just right
How was your experience with it?
I can't expect too much, but they are comfortable.
[Was there anything that disappointed you?
None
What are the specs of the product, such as protector?
How did it compare to other products?
It is more convenient than for mountaineering because my feet are not large.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
View detail
The fabric is more solid than I imagined.
With Uniqlo's ◯◯TEC at the top of the list, various manufacturers are offering underwear for winter nowadays, and it is thin, cheap, and excellent as riding wear.
However, don't you feel cold around your neck, wrists, and stomach after riding for a long time?
This Goldwin product has a solid fabric and (It is moderately thick) The fabric is very soft, and I didn't feel those coldness by sticking to my body. Furthermore, it is very comfortable against the skin.
It also has a Supporter function, which provides moderate tightness to the body to reduce fatigue from vibration and wind pressure.
Too bad it is not inexpensive.
I am 174cm and 77kg and I am usually an LSize, but I bought the XLSize. I am a little large in the stomach area, so it is a just fit for me.
I felt Tight around the shoulders and wanted a more comfortable fit, so I will choose XXL next time I purchase.
View detail
Not as tight as Compression, but a little tighter Size
Not as tight as Compression, but a little tighter Size View detail
Grip feeling is very good
[How is it used?
Enduro race on HUSQVARNA- TE250.
I have been using various types of gloves, but I have always been looking for the best gloves because I have been having a problem with fit-oriented gloves that tear easily and sturdy gloves that don't have a fit-oriented feel.
I knew that Goldwin had entered the Off-roadJersey market last year, but I didn't know that they were even selling Gloves.
First of all, when I opened the package and put it on, the Fit feeling was excellent and when I held the Grip, the sticking feeling was excellent.
I haven't used it for Race yet but it looks very promising.
The colors are quite subtle, so I hope more colorful ones will be released in the future.
Also, the price is a bit high, although I wish it had a lifetime warranty like Goldwin Off-roadWear,
If it were more durable, it would be fine, but that verification will take a while longer.
How did it compare to other products?
Size is 3" Purchase [fasthouse]. [FOX If you are using L Size in etc. 3" I think it would be good to
Goldwin's Size notation is confusing, and I would like to see the Size notation improved.
View detail
External stitching, soft leather
I was able to wear it even with my wide hands.
Leather is soft and stitched on the outside, so it doesn't hurt when your fingertips hit the seams.
It is soft leather, even if you use it hard without applying oil, so when it gets wet, you must dry it thoroughly or it will mold.
It doesn't come with a Protector, so what happens if it stumbles...
Anti-vibration seems comforting.
View detail
easy to operate
This is my second purchase of Goldwin Gloves and I like the fit of their Small Gloves. If you have a grip heater and a hand guard, your hands will not be cold. View detail
Warm but thick
Was the one you received as per Image?
When I was heading for touring around Urabandai at the end of October, I was wondering what I should do since 3SeasonGloves are too cold, but I don't have Winter Gloves, and I can't put a Handlebar Cover because I'm not a CUB.
I thought to myself, "Shut up and buy Winter Gloves," but I didn't have any Gold, so I tried a bad idea with these WIN de BlockInner Gloves.
[How did you feel about the Fit?
From other users' impressions, it seems that I have large hands, so I chose the M size, one size smaller than usual. I think it is a good idea to buy a smallest size, because the operability of the inner gloves will be significantly reduced if you do not choose the smallest size due to the characteristics of inner gloves.
How was your experience with it?
Again, as I knew from other people's impressions, it is quite thick. It was about twice as thick as I imagined.
I was able to fit LimitGloves inside, but I had to take them off because the fingers were hard to bend and the grips were hard to grip.
[Was there anything that disappointed you?
I guess it's the thickness. I didn't expect it to be this thick. Because of this, it is better to check Gloves in person.
What are the specs of the product, such as protector?
None in particular. But I think it will improve protect performance a little.
How did it compare to other products?
I will look for something a little thinner.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
The warmth was quite good, so it would be great if you could make Inner Gloves half as thick as these.
View detail
Rain pants are very useful if you only have them.
Originally, rain pants are bought for repair when they are damaged, but recently there are many touring jackets with waterproof function, so it is possible to buy only Rain Wear Pants and wear only Rain Pants when it rains, It is now possible to buy only Rain Wear Pants and wear only Rain Pants when it rains.
This way, you can reduce the bulky Rain Wear luggage at once, and while it is nice to not have to use your Rain Wear once on a touring trip, it is also disappointing to have to carry luggage that gets in the way, but if you only have your Rain Pants, your luggage is much more compact.
I keep only my Rain pants with me when I commute to work, and they are convenient because I can cope with sudden rain.
View detail
About Size
This is my first purchase of GoldwinGVector. I bought the L size without thinking about it because my current one is a L size, but it is a little too large for me. It might be good to wear it over a winter jacket. I will buy the M Size next time. View detail
Easy to wear and water-resistant enough
Not so hard and easy to wear, I guess.
Water resistance is also there. (It was a little flooded after a long run in a heavy rain)
With low height Boots, though, water can enter through the ankles,
This height prevents ankles from coming out of the Rain jacket during the ride.
I'm afraid we're no longer carrying it. ・ Too bad if it is discontinued.
View detail
It's warm, but...
It is thick for an Inner. It would be better if it were thinner. View detail
I'm happy with the Size!
GOLDWIN's Gloves are available in S size, which is helpful for small hands.
Design and texture are both good, but the product I received was connected to the middle finger sewing and I had to turn it inside out to deal with it. Therefore, I gave it 3 stars for quality.
I like the product itself very much.
View detail
First Goldwin
I needed it for touring and purchased it on short notice.
Very carefully crafted, these were great Gloves that allowed me to concentrate on the Handlebar operation.
It was very breezy, and the road was scorching hot, 37°C/38°F.
It was comfortable.
It dried during a 10-minute break, which also helped.
Personally, Plain Black would have been perfect over camouflage!
View detail
This is the second pair I've used. I especially use them as inner for Mesh Gloves.
The original use would be winter. Used as an inner for Gloves in the winter. I think that's how it's supposed to be...
I would like to say in a LARGE voice to those who are expecting such applications!
Buy your electric Gloves quickly to find happiness and peace!" And
Winter is cold no matter what you put on top of it. It is impossible. So, it is better to buy electric gloves with the wisdom of mankind. Absolutely.
In my case, I use this product as an inner layer of Mesh Gloves and use it in early spring and early fall. So, I use Mesh Gloves of One size Large.
*Inner Gloves for sweat removal are also used in midsummer, although they are thin.
The good thing about this product is that the SIDE of the fingers is made of mesh, which makes it hard to get stuffy. Naturally, the heat retention is inferior, but hands sweat a lot, so I think this design was chosen.
Incidentally, using it as an Inner for Winter Gloves, it is not totally ineffective, but it still has no heat source, so it quickly becomes meaningless. (Proven)
The product itself is very, very durable. The palms and fingertips don't get holes right away, and I personally think it's incredibly durable.
The wrist portion is much longer, which is also a high point.
However, since GOLDWIN was going to shrink Apparel development in the future due to the liquidation of its motorcycle division, we decided to buy more.
Maybe they won't be available in the future...
View detail
Very lightweight and excellent fit! Good ventilation
■ Design
As is typical of Goldwin, there is a wide range of sizes and colors. I purchased "Black" The model of the "Silhouette" is a glove with black as its base color, which is not too flashy. The outer finger portion has a slightly rugged structure, but by daring to use the same color for both the parts and stitches, the gloves have a sporty detail, but the silhouette itself is not too assertive.
■Size feeling
My hands are 18cm long and 10cm wide, which is about the size of M-L Size, but my hands are about 5cm thick with Mickey gloveSpec. This product, in the M size, was a fit that my thick hands were able to hold effectively. On the other hand, if you have long and thin hands, it may be a little too loose.
Texture
It is made of synthetic leather and Mesh. Since these are very lightweight gloves, each material is thin, but the stitching is tight and the texture seems durable. The Protector is attached in case of a fall, and the possibility of skin injury from being scraped on the ground seems low.
■ Function
Protection, anti-vibration, and smartphone compatible, these are highly functional Gloves. The most important thing for smartphone compatibility is that the fingertips are not scuffed. Since the body's static electricity is transmitted by touching the dielectric threads, it makes no sense if there is no firm Size all the way to the fingertips. Both thumbs and index fingers are firmly supported.
■Usability
As mentioned above, the instep is made a bit large, so it is very smooth to put on and take off. Thanks to anti-vibration, fine vibrations from the motor cycle at high rpm are suppressed, which seems to reduce fatigue considerably.
Also, even at low speeds, the wind is coming through the Mesh well. I have not tried them in the rain, but since they are not mesh gloves, I do not think that waterproof performance can be expected.
General Comment
They are comfortable and highly functional, but not too stiff. I bought them during a bargain price period, and I am very satisfied with them.
View detail