Reviews
The situation where Colet is helpful if possible is a slash guard of the point which does not fall over although it is a thing to avoid. . Paint application carries out into small pieces by the welded section of a pipe by coarse ? in or just for a
The situation where Colet is helpful if possible is a slash guard of the point which does not fall over although it is a thing to avoid.
.
Paint application carries out into small pieces by the welded section of a pipe by coarse ? in or just for a moment, and carries out [ it is sufficient for it and ].
A fixing position is also different by right and left.
.
It is satisfactory to attachment.
The dress-up effect up is satisfied very much.
View detail
Although the engine slider was used, it was decided at this by appearance that he wanted to protect a crank cover. Even though the cover did not have a crack at the stand and according to KOKE and counterclockwise twining lump accident fall of 2 times
Although the engine slider was used, it was decided at this by appearance that he wanted to protect a crank cover.
Even though the cover did not have a crack at the stand and according to KOKE and counterclockwise twining lump accident fall of 2 times as for GSX1400 of a predecessor vehicle, appearance was somehow repaired with a merciless crack, a file cliff, and buffing, but the problem remained in thickness.
after the predecessor vehicle disappearance by arson -- said -- reviving No. 2 -- the time -- next time -- important -- riding -- a sake -- this -- having carried out .
Although the attachment which carries out engine mount bolt removal may be sufficient as a wearing feeling, its bolt by the side of exhaust is long, and it is not a stainless.
Moreover, although a rubber spacer is good between covers, it is not quite satisfactory that between frames opens about 1 cm.
I lost the crevice with the urethane rubber tape.
Since it has not failed to get off the ground yet, reinforcement is not known, but appearance is said to mind.
View detail
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike. Although appearance and reinforcement of comment were wonderful, since he had a st
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike.
Although appearance and reinforcement of comment were wonderful, since he had a strange feeling with the angle to see, * was set to four.
View detail
Compared with a pure engine guard, it is stylish, and a parenthesis is good! Although it becomes high, it is a recommend and peevish, and structure is also solid, and a price is likely to protect an engine perfectly.
Compared with a pure engine guard, it is stylish, and a parenthesis is good! Although it becomes high, it is a recommend and peevish, and structure is also solid, and a price is likely to protect an engine perfectly. View detail
Since it fell and the attached machine protector had broken, the slash guard was used this time. Since it has not fallen after still attaching, an effect is not known, but it is written to the extent that it understands also by an amateur, if an instr
Since it fell and the attached machine protector had broken, the slash guard was used this time.
Since it has not fallen after still attaching, an effect is not known, but it is written to the extent that it understands also by an amateur, if an instruction manual is repeatedly read 2-3 times as comment at the time of attachment.
At the time of delivery of goods, since components were not subdivided, he merely waved to components, checking the contents.
When attachment had T wrench and a hezagonal wrench, the amateur was also able to do it.
Since it was finished fairly finely although buffing was used on account of the budget this time, it is satisfactory.
View detail
It is wearing to the zephyr 750. Although it did not have the still showy fall experience, it stood at the time of flesh fatigue, and guarded the car body thoroughly twice the past in the downs lump at the time of GOKE and alley way revolution failure
It is wearing to the zephyr 750.
Although it did not have the still showy fall experience, it stood at the time of flesh fatigue, and guarded the car body thoroughly twice the past in the downs lump at the time of GOKE and alley way revolution failure.
The tastes of appearance are that the specification torque at the time of attachment is not specified first of all if it places and dares to give candid advice, and that hole position accuracy is bad.
Since an engine mount bolt is removed, if it can do, I will think whether it is all right to request by attaching to a motorcycle shop.
Although it is fine [ the back ], since it is easy to become dirty, let's also take the cleaning method into consideration and choose color (finishing).
Moreover, at the time of sprocket exchange, since 1 and the location of the sprocket cover attachment bolt of a car body wear, unless it loosens a slash guard, a bolt does not fall out.
Since it is the work of GICHIGICHI even if it loosens, be careful not to attach a crack to an engine with the edge of a cover.
View detail
And the generator cover was damaged, and when it fixed, it equipped together. [ stood and ] Appearance is very good! Pleasing so that it may be a strengthening frame. When it has fallen during a run, a left-hand side guard bends inside with an imp
And the generator cover was damaged, and when it fixed, it equipped together. [ stood and ]
Appearance is very good! Pleasing so that it may be a strengthening frame.
When it has fallen during a run, a left-hand side guard bends inside with an impact, and it is impossible to merely play an engine guard's role not much after it in the case of Bandit250 ...
But if this guard does not exist and you will think whether to have suffered more serious damage, I will have attached too and will think that it was good.
It seems that an order of only guard of one of the two is incidentally also possible.
Is it indispensable equipment in order to protect its important own car? It is one article to recommend you strongly!!
View detail
It equips for the tank and crankcase cover protection instead of appearance so and so. * Side stands were once unstable, and although it fell on the left, some cracks and the guard of others were safe to a mirror and bar end only from the Gary crack.
It equips for the tank and crankcase cover protection instead of appearance so and so.
* Side stands were once unstable, and although it fell on the left, some cracks and the guard of others were safe to a mirror and bar end only from the Gary crack.
* apparently -- GOTSU -- although it looks right [ that ], since it is a hollow configuration of an aluminum pipe, it is quite light.
* Since it interferes with a sub frame in a helmet holder for a while, as for the helmet holder which is hard to use, user-friendliness worsens further.
In addition, naturally cleaning of the circumference and maintenance become difficult.
* Since the showy fall has not been carried out yet, important reinforcement is ???, but I think that an engine mount part about which it is worried, and a possibility that a frame will die by one shot are low since it is with a sub frame.
since -- if the ordinary (?) fall is also about 2~3 times, it should bear.
but wound prevention -- although I think that general usage says ...
View detail
Before, when having ridden on the bandit 1200S, it had equipped. Since there was no money, it had equipped with buffing by private paint application. Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who
Before, when having ridden on the bandit 1200S, it had equipped.
Since there was no money, it had equipped with buffing by private paint application.
Attachment of attachment was completed also for itself comparatively simply [ those days ]. [ who was still a maintenance beginner ]
Although it is the effect ... Because it is made of aluminum, he is worried by reinforcement.
It stands and enters inside also in a GOKE grade.
honest -- (?) -- since it will fall, or it becomes and it enters inside -- the exchange only for 1 time (repair) -- it is necessary to carry out
Although surely the engine circumference is protected, considering cost and durability, it is the honesty ?.
Although charm is light to be sure, I think that it is not speaking if the reinforcement of a protector is low.
If it asks for robustness and defense nature and will search for an authentic positive one for lightness, we will recommend you to use a slider and the skid pad.
Although there may also be wearing in respect of looks exceptionally .... It is if a direction with a sub frame is good in that case?
View detail
Yet, since he has not been indebted to this, an effect is not known, but rather than the slider of a rubber, it is likely to protect certainly. Appearance is good and pleasing. A value is stretched a little.
Yet, since he has not been indebted to this, an effect is not known, but rather than the slider of a rubber, it is likely to protect certainly.
Appearance is good and pleasing.
A value is stretched a little.
View detail
He wanted the strong guard of the rigid feeling and he chose the slash guard of the frame type. Although the real value fortunately has not been tried yet, rigidity seems to be fairly high as expected. However, since even Ho of a handle will think
He wanted the strong guard of the rigid feeling and he chose the slash guard of the frame type.
Although the real value fortunately has not been tried yet, rigidity seems to be fairly high as expected.
However, since even Ho of a handle will think that damage does not reach at the time of an emergency fall if slight texture is already made with having wanted since it is parts which become unreserved to outside and the guard is extended even to the upper one to a slight degree, let evaluation be four stars.
On the whole, it is [ but / well ] satisfied.
View detail
It attached in order to make breakage of the car body by fall into the minimum. Since it has not fallen yet, an effect is not clear, but since the engine is wrapped firmly, engine breakage is likely to end few. Or [ that breakage of a tank can be
It attached in order to make breakage of the car body by fall into the minimum.
Since it has not fallen yet, an effect is not clear, but since the engine is wrapped firmly, engine breakage is likely to end few.
Or [ that breakage of a tank can be prevented ] ... I think that it is based on the method of a fall.
I think that structure is the comparatively firm one.
Since it is made of aluminum, it is very lightweight.
Moreover, I think that it is worth giving since the duty of a sub frame is carried out in the case of Z1000 (03~06).
If the bolt and shaft which support the engine about attachment are pulled out in order, in order to replace them with an attached thing, the recommend of attaching the unfamiliar one in a store is carried out.
Since the engine weight is applied to the bolt or the shaft, when exchanging, it is delayed for a while.
The description is written in Japanese into which the foreign language was translated as it was, and is somewhat unclear --
Information, including a required tool, the torque value of bolting, etc., is not writing.
Moreover, since work will not progress or it will be hard to work if the firm tool is not assembled, cautions are required.
View detail
It has attached to the '05 zephyr 750. He thought that a crack should have been given to a dynamo when GOKE [ stood and ], and it attached. The gold medal is pleasing by that which also says fashionability. Attachment can be done simply by its
It has attached to the '05 zephyr 750.
He thought that a crack should have been given to a dynamo when GOKE [ stood and ], and it attached.
The gold medal is pleasing by that which also says fashionability.
Attachment can be done simply by itself.
I think that they will be satisfactory goods if fashionability is also considered although a price is higher.
View detail