Reviews
Fits: HONDA TRX450R 2006 - 2009, HONDA CRF450R 2002 - 2003
Works great, fits good
It's been a little over 3 years and 10,000 km since I installed the manual tensioner. Installation was a breeze and all that nasty cam chain noise that comes with the OEM tensioner disappeared. It doesn't get any easier in my opinion. I readjusted it for the first time since installation this week, and I probably didn't even need to. Does the job of keeping the chain snug, super tight, slack, you pick! Snugged it up and engine is much quieter now as it would be expected with a new ProX chain.Just installed, durability rating above should be ignored.Automatic one was all out of adjustment and keep the chain too tight.Quality and finish is good. Came in a fancy box too.Came with gasket.Moved breather box to install, took minutes and put everything back after. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI SV650, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, HONDA NC700XD, HONDA NC700XA, HONDA NC700X, HONDA NC700SA, HONDA NC700S, HONDA MSX125 Grom, HONDA CBR929RR, HONDA CBR900RR, HONDA CBR650F, HONDA CBR600RR, HONDA CBR600F4, HONDA CBR250R, HONDA CBR1000RR, HONDA CB1000R
Garbage.
Poorly built, oil leaks from the check window. At worst, the Wheel and Swing Arm are bald. View detail
Fits: APRILIA RSV1000 Tuono V4R 2012 - 2013, APRILIA RSV4 2009 - 2016
Looks Fashionable and functional!
If it's a normal Filler cap, it's just a Bolt, but this product is different.
As shown in the image. It has an anti-loosening stopper.
Tighten the tip of the wire to the bolt near the Filler cap, and after tightening the cap, point the pin to complete.
The colors are also very flattering, so you can get a much more fashionable look.
View detail
Fits: APRILIA RSV1000 Tuono V4R 2012 - 2013, APRILIA RSV4 2009 - 2016, APRILIA RSV1000 Tuono V4R 2012 - 2013, APRILIA RSV4 2009 - 2016
Firmly sticking to packaging firmly included!
Purchased POWERSTANDS RACING products for the first time.
In the home country, Tank cap, Footpeg, Handlebar, Clutch adjuster, Preload Adjusteretc. , We sell various Aluminum Cut-out Parts.
It arrived half a month earlier than the scheduled delivery date of the goods, so it was a great change to Large.
When the product arrived at home, opening the box first was surprised is the box containing the product.
I was surprised Large I was surprised that I was in a very luxurious box like a wallet of a Brand thing that I can not think of as a part of Motorcycle.
When opening it looks Sticker is Quantity : 1pc. I was.
I have seen various Filler caps until now, but when I observe the product thoroughly and look at it carefully, the making-in is much polite and satisfactory finish than I expected.
Weighing 13 g of NORMAL resin Cap, Body & Wireetc. Included Parts : It was 30 g with it.
Since Rubber packing was also properly attached, the making of Filler cap is 100 points.
Even though Filler cap's creation is 100 points, in my evaluation "quality - It is the reason why the texture is the star 3, but the attached Wire Lockplate was not good.
I think that it is probably because it is universal with other models, but Bolt of my RSV4 Factory's Crankcase Cover is M6, but the attached Wire Lockplate was M8 hole diameter.
In addition, the thickness of Plate is a little thin.
Therefore, turn off the Wire, remove the lock plate, spread the hole through which the Wire passes through to M6 with Drill, and use Wiring again for the hole of M8 through which the Bolt passes..
Even though the function is not impaired, since the making of the attached Wire Lockplate is cheep, among them Included Parts : I would like to exchange it for Other Company Product.
However, as I mentioned above, Filler cap Body is a wonderful achievement.
Wire Lockplate is a little more solid, hole diameter M6 (Since it can be spread by Drill when the vehicle is M8) I think that it would be 100 points perfect product with no complaints.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R
Does not fit WR250R
The case saver does not Fit the WR250R. Holes cannot be aligned and unable to mount. ☹️ I'm using a 14t sprockets and the case saver is unable to fit in. Wasted my $$ on this View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI SV650, SUZUKI RMX250, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-S750, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSF1200 Bandit, SUZUKI AN400 Burgman, KAWASAKI KX250F, YAMAHA WR250F, YAMAHA WR450F 2012 - 2013, SUZUKI TL1000S 1997 - 2003, SUZUKI SV1000 2003 - 2007, SUZUKI RMX450Z 2010, SUZUKI RM85 2002 - 2009, SUZUKI RM80 1990 - 2001, SUZUKI RM250 1982 - 2008, SUZUKI RM125 1982 - 2008
Warrior rockpiece is useless
【What made you decide the purchase?】
Appearance luxury and Wire Lock Piece are included.
【How was it actually used?】
Although it is an Oil cap, it is not a performance performance, but I think that it will help us prevent Cap from coming off by fixing Wire.
【Was it difficult to install? (Hard parts case)】
It is easy to replace with OEMCap.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Do not overtake the high Torque to fasten the Wire Lock Piece with OEMBolt.
[Is there anything I was disappointed about?]
That the Wire Lock Piece got bent easily. If the gold item is simply long and tightened together with Bolt, it grips with just touching the tip.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Individually Included Parts : It may be good to feel like. AGRAS comes with Wire Lock Piece (Include) It was as goods.
Does Wire Lock Piece change its shape or increase the thickness a little more.
【Have you compared items?】
AGRAS's Oil cap
[Others]
It is possible to do well for imported goods and good COSPA.
Scratch prevention processing with Wire (I'm through Tube) It is also being. This is highly appreciated!
I tried to put in Red line because it is unpleasant with monochrome.
View detail