• Home
  • Product reviews
  • Search reviews
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
GIVI Billet clutch coverType-2 Clear all
Tank Lock [MT505]
GIVI
Tank Lock [MT505]
Japanese Webike user
4/5

Replaced the company's XS319

We were looking for a replacement for the company's XS319 Fastener, which we have been using for several years, due to damage to the Fastener.

Main compartment holds a smartphone (Pixel7pro), a bifold Wallet, an electronic Cigarette in a Case, and Toilet paper instead of Pocket tissue

With the XS319, I had difficulty handling the Cable when charging my phone, but this is not a problem with this product!

The Pixel7pro does not fit into the smartphone storage pocket on the back of the lid because it is not wide enough.
I think the width of Xperia1II used for Navigation is the limit (although it is slightly long). View detail

ATLAS series B33NM unpainted black rear top case (monolock)
GIVI
ATLAS series B33NM unpainted black rear top case (monolock)
Japanese Webike user
4/5

Helmet and rain gear

I had been using a 26-liter round top case, but I felt that the round shape offered less storage space, so I purchased this 33-liter square top case.
Tour cross3 with Visor will fit enough +α to hold at least rain gear.

It is easy to lock the door without a key, but you have to be careful with the marker. View detail

[Repair Parts] Universal Base Repair Parts
GIVI
[Repair Parts] Universal Base Repair Parts

Fits: Others

Japanese Webike user
4/5

Those who use one Case for multiple car models.

I purchased this product to convert a GIVI Mono-lock case to another vehicle. It is easy to install and can be installed in most carriers without any modification. The price is also inexpensive, so I think it is the best choice. View detail

Rear Box [B32NB]
GIVI
Rear Box [B32NB]
Japanese Webike user
4/5

I liked it.

Installation and removal are excellent.
Is the rigidity a little weak, perhaps because it is designed to be lightweight? View detail

Monolock Case B45+
GIVI
Monolock Case B45+
Japanese Webike user
4/5

Large doubles as Small

Boxes used so far
Mono-lock case [E43NTL-ADV]
It is good because there is plenty of room in terms of capacity, but the closing operation is cumbersome until you get used to it.
It was Stress every time, every time.

Mono-lock case [B32NB-ADV]
The closing motion was easy as I just closed the lid.

Top box 35L, compatible with Honda OEM and Smart key
Although Merit is that only one Smart key is needed.
The inside of the box has a lot of protruding parts, and perhaps because of its shape, it is necessary to consider the direction of the Helmet when storing it.
I had only used it for 2 months, but Stress was more Large.

That's where I found this B45+ this time.
Well, certainly Large
I think it looks the worst from behind.
But I think the security of being able to fit a lot of luggage and the lack of Stress when using it is good.
Base plate is made of Wide (Sold separately) I feel more secure now that I have changed to
I don't know if it's because it's still new, but the Hinge part is stiff.
Much thinner and chubbier insoles than previous GIVI product insoles
Those are the two things I'm not happy about.

My request to Manufacturer would be to add a Pocket or something to hold the included Net in the corner or edge of the lid side! View detail

[Repair Parts] Handlebar Clamp Fitting Set for Repair
GIVI
[Repair Parts] Handlebar Clamp Fitting Set for Repair

Fits: Others For UniversalScreen

Japanese Webike user
4/5

Repair Parts are well stocked.

I had only the Screen, so I purchased only the Repair Parts and was able to install them.
The installation was easy to understand because the Instruction Manual can be downloaded from the website.
The feeling of using it is not a problem with wind pressure, though, as I have used it before,
The Cap of Included Parts:has the BALI in the image, which was prepared with a Cutter Knife and then installed.
The installation points are the Clearance and Angle of the Screen and the Light, which change the appearance of the Motorcycle.
As a request to the manufacturer, we would like to sell only the Spacer, which is attached between the Handlebar and Clamp, as a Single Item.

I was so satisfied that I Repeat both Left SideRight Side. View detail

Mono-lock Case [E43NTLD]
GIVI
Mono-lock Case [E43NTLD]

Fits: Others

Japanese Webike user
4/5

Large also means Small Yes!

I have recently been commuting on my motorcycle more and more and was feeling that my old B32 was running out of capacity, so I bought this E43 just in time for the start of Webig's sale at Timing.
It arrived as fast as possible because it was in stock, so I installed it on DJEBEL right away.
I am very satisfied with the capacity, which is sufficient for commuting.
It is wider than the B32, so it feels larger now, but I think you will get used to the larger size as you start using it.
It would be great if it came with a non-slip rug on the bottom of the interior, but maybe I'm being a bit greedy? LOL! View detail

ATLAS series B45NM unpainted black rear top case (monolock)
GIVI
ATLAS series B45NM unpainted black rear top case (monolock)
Japanese Webike user
4/5

45Liter is Large capacity

When I received the package, I was surprised at how large it was, but not so much when I installed it on the car body.

Installation is simply by attaching the Base to the Carrier.
DL1000 V-STROM250SX does not use UniversalBracket because of the mounting holes in the Carrier. The supplied Bolt was a little too long for the UniversalBolt, M6*20mm should be fine.

OGK GEOSYS is also large enough to close without laying down, and can still fit a helmet, rain coat, and gloves. View detail

ATLAS series B33NM unpainted black rear top case (monolock)
GIVI
ATLAS series B33NM unpainted black rear top case (monolock)
Japanese Webike user
4/5

First Top case

It took a little time to position the base plate, but the installation itself was on a Level. View detail

[Replacement Parts] Inner Mat for B32 Series [PB32N]
GIVI
[Replacement Parts] Inner Mat for B32 Series [PB32N]

Fits: その他 B32

Japanese Webike user
4/5

Exclusive shape is stunning, price is high

Although the complicated cut shape is unique to OEM, I think the texture of the matte itself is quite similar to that of OEM.
I wished the price was another 1,000 yen lower. View detail

[Repair Parts] M2X12CSK Tapping Screw MP60/MP70
GIVI
[Repair Parts] M2X12CSK Tapping Screw MP60/MP70
Japanese Webike user
4/5

Purchased for Repair because it was rusted.

I got this screw from a friend who gave me a GIVI box… I took it apart and found that it was rusty and would come apart if I removed the rust. I am glad to be able to order such a minor part from you! View detail

Mono Lock Case B47 Series
GIVI
Mono Lock Case B47 Series
Japanese Webike user
4/5

Satisfaction with Largeness

I am satisfied with it because I can put large items in it. However, if I put a helmet and a jacket in it, I can't put them in.
The lock works without a key, so be careful not to put your motorcycle key inside! View detail

Special Carrier
GIVI
Special Carrier

Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF

Japanese Webike user
4/5

Firmly looks good, but a little hard to install.

Installed on CB400.
It can be attached without removing the OEM Tandem grip.
The front side is co-tightened to the rear shock, and the carrier side replaces the 1 pc of Tandem grip fixed bolt that comes with the carriers.
The finish is beautiful, and the matte, elegant paint is not noticeable.

The problem is that the bolt did not bite into the screw threads, and it took a lot of time to re-try and re-try. If you have never tinkered with motorcycles before, there is a possibility that you will screw up the grip or ride it with an incomplete installation. On the other hand, if you are skilled enough to replace the oil, you should be able to manage. The Torque and order of work are all written in the Instruction Manual, so there is no need to worry.

The box bracket is small enough to fit almost any size, but too small to be used as a carrier. However, it is too small to be used as a carrier. View detail

Mono Lock Case [E43NTL-ADV]
GIVI
Mono Lock Case [E43NTL-ADV]

Fits: Others

Japanese Webike user
4/5

Installation requires ingenuity.

The included Mono-lockUniversalWIDEBase did not fit the DL1000 V-STROM800DE Carrier, so I purchased a ZBracket from a DIY store and installed it.
But I am satisfied with the firm fixation and the capacity. View detail

Aerodynamic Windshield [D263ST]
GIVI
Aerodynamic Windshield [D263ST]

Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX

Japanese Webike user
4/5

Larger than OEMScreen

It is very cheap than buying from OEM, and the sides are sized up to the equivalent of a Knuckle guard.
It is larger than OEMScreen.
Unfortunately, the thickness of the product is thinner than the OEM, but the strength of the product is smaller than the OEM, so the product may flex at high speeds,
Wound is more likely to be attached compared to OEM due to the difference in material. View detail

Nylon Rack [E165]
GIVI
Nylon Rack [E165]

Fits: その他 , その他

Japanese Webike user
4/5

Practical or Dress-up

I had difficulty with the installation because I felt like I didn't explain it well enough.
I thought that the Size might not have been produced by manufacturing, but if I calmly aligned the Screw holes, it was perfect.
I think NORMAL is good because it makes the cooler box look like a cooler box, but a little Wilde.
I don't have any practical use for it.
If it were $2,000 cheaper, it would be 5 stars. View detail

Tank Lock [MT505]
GIVI
Tank Lock [MT505]
Japanese Webike user
4/5

The convenience of Tank Lock is retained, and it goes in rather well.

I had been using Tank Lock for a while, but ordered this because my Fastener broke.
The capacity is just right for a touring mapple, a glasses case, a memo pad, etc.
The only thing that bothered me was that when closing with the fastener, there was a buckle in the middle of the fastener that got stuck.
Why is there a Buckle in the middle?
It's strange View detail

Mono Lock Case B47 Series
GIVI
Mono Lock Case B47 Series
Japanese Webike user
4/5

GIVI indeed.

The B47 boasts the largest capacity of all the Mono-lock cases, and it does not look out of place on a large motorbike.
The capacity is sufficient for my needs, and I have a Helmet + a bag of tools + documents.

Side case is also available, but this one is usually sufficient. View detail

[Repair Parts] Security Key (1pc.) [GIVI SL101]
GIVI
[Repair Parts] Security Key (1pc.) [GIVI SL101]

Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250

Japanese Webike user
4/5

for Replacement

I used to buy a GIVI 45LiterBox and used it for years, but one day the key suddenly stopped turning. After using it for a while, it stopped closing at all, so I decided to replace it.
I was worried because I did not know how to replace it, but I saw a video manual on DAYTONA's site before I purchased it that showed how to replace it, so I decided I could do it myself.
If you are anxious, it may be a good idea to watch the video manual in advance before purchasing the product, because you can actually replace the product by following the manual video. View detail

Special Rack [SR1168]
GIVI
Special Rack [SR1168]

Fits: HONDA SUPER CUB C125

Japanese Webike user
4/5

Simple construction

[How is it used?
Used to install a GIVI Box.
Was the one you received as per Image?
The Pipe diameter was thick and strong enough, just like the Image.
How was your experience with it?
GIVIMono-lock basePlate was also fixed firmly and was simple and well made.
[Points to note]
Quantity:Pair (for Left and Right) The two symmetrical parts were aligned at the back center and bolt-tightened.
The screw holes on the tire house side were a little difficult to align, so we installed it by picking up the four screw holes little by little.
How did it compare to other products?
No comparison was made.
▼Other than that... I tried to install KIJIMA's back support item number:210-4963.
The Shock absorber side of the OEM Carrier has a thin wall on the inside of the Shock, while the Shock absorber side of the OEM Carrier has a thin wall on the outside of the Shock.
The GIVI rack is thick-walled, and the thick flat washer on top of the Shock is removed and tightened with a cap nut.
The thickness of the plate on the Cap Nut side of KIJIMA's back support eliminates the screw space for the Cap Nut to stop.
It could not be installed. View detail