Reviews
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
I think it's cool.
I think it's one of the better looking ones in the Monokey base.
Installation is easy
However, I think the price is a bit high ….
If you're going to put M5 on, I think it would look better with M7 on.
View detail
Purchased for additional cars.
I purchased this giviBox because I have been using several giviBoxes and I wanted to use the giviBoxes. View detail
Fits: HONDA Forza 250, HONDA CB300R, HONDA FORZA300, HONDA Forza350, HONDA Forza350
Rack for attaching Monokey base to MF17
I purchased this product for the purpose of installing a GIVI M7 FZSeries Monokey base 91332 on a FORZA MF17.
The installation itself is very easy and takes only a few minutes. However, the M7Base and the holes were not aligned, and the rack had to be modified by force to align the holes. I was surprised that the steel of the rack was quite soft and bent easily, but I managed to install it.
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Proven and good looking.
I think it's a little expensive, though.
I personally think it's the best looking of the Monokey base.
Installation itself is very easy.
View detail
Suitable for day-touring
It is perfect for day-touring.
Especially for Motorcycle with low payload.
View detail
Fits: TRIUMPH Bonneville T100, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black
It broke after one year of use.
I installed it in TriumphBONNEVILLE or Quantity of the support after one year of installation.:Pair (for Left and Right) Both were broken. View detail
Convenient and easy
Tank Lock type, first purchase,
I was confused with Type, which can be locked with a key to the vehicle Base.
Purchased this one due to its high price.
Wire lock as an anti-theft measure….
The purpose of using it is to put in and out Small Type Camera of …GoProetc.
Capacity is small, 6L, just right.
The waterproof cover and shoulder belt fit nicely inside the zipper on the top lid, and the cell phone compartment on the inside of the top lid fits an insta360 just right. The insta360 fits nicely inside the top zipper, so it's convenient when you are away from your motorcycle.
It is also useful as an accessory case when you get off the car without your camera, gloves, etc.
The feeling is … very convenient and easy to use!
To install, simply place it on top and it will be fixed to the base of the car body,
You will get used to it after the first couple of times when you remove it.
While driving, it does not bother me because of its small size in terms of capacity.
I don't feel much inconvenience in opening and closing the tank cap.
Overall evaluation of the product was satisfactory.
View detail
I was looking for an affordable Size and this is what I got!
I have been using GIVI products for a long time, but this time I wanted a side case to match the top case for touring.
The Mounting Kit was a great help. I was impressed with the firmness of the kit after installation.
The mounting screw holes, etc. were accurate and easy to install.
View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
Large Satisfied!
I installed it on my PCX160.
With the Universal Carrier, it would appear to protrude from the Mono-lock base, but with this, it fits with the Refreshing and is rigid enough.
When installing, it is necessary to remove the rear cowl and drill a hole with a hole saw, but I was able to do this smoothly because I researched on the Net.
I put a Rubber Bush in the gap between the Cowl and the Carrier's prop, so it was a very good parenthesis!
View detail
Pannier holders are nice.
I purchased the Pannier case in addition to the Top Case and was very impressed with the Holder, which is an exact match for my car. I was very impressed with the Holder, and the installation position is also very close to the Exhaust System.
in a nice salty way. [Color] ClearQuantity:Pair (for Left and Right) The sense of balance was good.
View detail
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
I still can't deny that it looks cheap.
It can't be helped that it is a dedicated part, but it still looks cheap.
There are many parts to install, and they have not been installed yet. As an amateur, I feel like I have to work hard in terms of menbarrel to install something this solid, but I am looking forward to seeing where it goes, so I will make time to do my best.
View detail
Purchased for Touring
I purchased this product for my GB350S.
Rear Carrier uses DAYTONA's Multi Wing Carrier.
I thought it was too large for the Motorcycle size, but it was just the right size.
Installation is as simple as bolting the attached Base to the Carrier.
When running empty, it made a clattering sound, but there was no particular problem with driving.
One point of concern is that if you put the Key in the locked position while it is open, then close it from that position and press down, the key will
The cost will be high, so care must be taken not to marker it.
View detail
Used for GIVI E21
GIVI's E21 key was damaged and was replaced.
I was worried about whether I could use it or not because the product description only said "Universal", but I had no problem.
It worked. Although there is an inner groove Key set Z1565T for keys with E21 listed in the compatible MODEL,
3pcsQuantity:Set is not set, so it is more expensive. I think this product is sufficient.
View detail
I think the structure that allows the key to lock even when it is not completely closed is defective.
I have used several types of LargeSmall cases for GIVI products, but this is the first time for me to use the MonoLock type.
The old locking mechanism of early products, where the lock would get caught on something and prevent the door from opening, has been eliminated, but the fact that the door is locked even when it is not locked is a large drawback. Of course, the root cause is that the user does not check the well, but when I was in a hurry, I ran thinking that I had closed the door and was in a hurry to see if I had lost something after arriving at the destination.
It would be nice if the structure of the key could not be turned if it is not locked as in other companies' products, but I wonder Large why such a structure was chosen.
View detail
Large doubles as Small
I used to use a 30L Top case, but I wanted more capacity for camping touring and other activities.
I took the plunge and bought this Case, which holds 43 liters, if I had to buy it.
As a result, I am Large satisfied.
I go to hot springs and buy souvenirs even for day-touring, so if this is all I have, I can use OnsenQuantity:Set + souvenirs can be easily accommodated.
It is very convenient and can easily accommodate a Bag to be used when getting off the Motorcycle.
Camping touring can also fit the luggage, so you don't have to worry about loading it.
The Silhouette of the Motorcycle is a little too Large, so the Motorcycle Silhouette seems to collapse a little, but it is much more convenient than that, so I am satisfied with Large.
View detail
Many Parts (Screw/Screwetc.)!
I had no choice but to buy it in order to install GIVI's TOPCASE, but I haven't installed it yet because of the number of screws and other parts. I would like to install it before Camping touring in the fall, but the rigidity of the case is so strong that it may be too large to install.
I used to tinker with various motorcycles, but that was as a student when I had time. Now I'm so busy, I don't know what to do...
View detail
Installed in 2023 MODEL.
Since the MODEL has been changed from Mounting Boltm6 to m8 since 2022, a little modification was necessary. View detail
Tank LockBag is convenient to use
I used GIVITank LockTank Bag in FJR. As you know, it is very useful because it can be detached with one-touch, so I do not have to take it off when I take a break. This time, I added a CRF250L to my CRF250L, and although I can install it on the RALLY50, I cannot install it on the L. So, I decided to use the Tank LockTank Bag. Therefore, I purchased this product in order to use Tank LockBag as a seat bag. View detail
When in doubt.
I was wondering which CarrierCase to attach to my CT125, but decided on this one because of its light weight and capacity. I am satisfied with the Large size because it is easy to install and holds enough stuff. The only regret is that the Inner Mat is sold separately. But I am generally satisfied! View detail
This is for Large type box!
It can be mounted on MT-09GIVIFitting for Mono Rack without any modification. I had been using the B47Series on a narrower UniversalBase, but recently it started to rattle. I have changed to this WIDEBase and there is no more rattling at all.
We felt that WIDEBase is still more stable for Large type boxes.
View detail