• Home
  • Product reviews
  • Search reviews
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
GIVI Clear all
Top Case Fitting for Monolock [SR1191]
GIVI
Top Case Fitting for Monolock [SR1191]

Fits: HONDA CRF250L, HONDA CRF250L〈S, HONDA CRF250 RALLY, HONDA CRF250 RALLY〈S

skooby
5/5

Genuine Givi Top Case Fitting for Monolock for CRF250 2021

Not really a part I have fitted to one of these style bikes before but the customer wanted one so I got it from Webike at a better price than elsewhere. Not a hard part to find which did surprise me as these bikes don't usually want these fitting. I already had a few other parts in my order and luckily they were smaller ones, so I had them all shipped together to save on cost. EMS delivered my order in 5 days from shipping which was great. The box was fairly large as this is a large part but Webike pack things out very well so none of the smaller parts got any damage. The rack fitting is very well made, the welds look super tough and the painted finish is flawless. It came with all the instructions needed and the bolts and other parts were all included. Fitted in no time and the customer is very pleased with the outcome. Thanks Webike. View detail

[Repair Parts] Inner Bottom Matte [PE43N E43]
GIVI
[Repair Parts] Inner Bottom Matte [PE43N E43]

Fits: その他

Japanese Webike user
5/5

Pricey, but in perfect shape♪

GIVI E43 GOLD (2 million unit sales commemorative model) I put it on the

To begin with, the box is a decent size, but my ADV helmet doesn't fit in it, so I went up against the wall and bought this one (lol).
The things you put inside are surprisingly Dance." Therefore, it is safer to have a solid Inner.
The price is expensive, but it comes with Exclusive Design, so you can rest assured that the things inside will be safe! View detail

Monolock Case ANTARTICA Rear Box [B42NB]
GIVI
Monolock Case ANTARTICA Rear Box [B42NB]
Japanese Webike user
5/5

Expected

The box itself is a true GIVI product, and I have no complaints about it.
Unfortunately, the attached Universal Mounting Base cannot be used to mount it on a motorcycle. View detail

MONOLOCK Base [M5M] for FZ Series
GIVI
MONOLOCK Base [M5M] for FZ Series

Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500

Japanese Webike user
5/5

neither good nor bad

Requires an optional mounting jig, but can be securely fastened.
Radio pliers should be present for installation. View detail

[Repair Parts] Inner Bottom Matte [PE43N E43]
GIVI
[Repair Parts] Inner Bottom Matte [PE43N E43]

Fits: その他

Japanese Webike user
4/5

Exactly because it is OEM Product

The inside of the Case is uneven, so I thought about making my own, but decided to purchase an OEM Product.
It looks Refreshing and very satisfying. But Cost performance is bad.
I was aware of this, but the amount of content is reduced. As a result, I am glad I purchased it. View detail

[Repair Parts] Security Key (1pc.) [GIVI SL101]
GIVI
[Repair Parts] Security Key (1pc.) [GIVI SL101]

Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250

Japanese Webike user
5/5

Quantity neatly:Set possible

I was in-locked at a SA on the highway, destroyed the Key at a Service station, and purchased it.
Replacement work is not that difficult. View detail

Mono Lock Case [E43NTL-ADV]
GIVI
Mono Lock Case [E43NTL-ADV]

Fits: Others

Japanese Webike user
4/5

GIVI good.

GIVI is stable. I searched for various top cases, but GIVI would be the one to use for a long time!
I am satisfied with the appearance, security, and quality. It is an Exactly product for travel Touring. I recommend it. View detail

[Replacement Parts] Inner Mat for B32 Series [PB32N]
GIVI
[Replacement Parts] Inner Mat for B32 Series [PB32N]

Fits: その他 B32

Japanese Webike user
4/5

Purchase at the same time as Rear boxB32NB

[How is it used?
Cushion material of what was purchased at the same time as B32 and placed inside.
Motorcycle is used for commuting and touring.

Was the one you received as per Image?
It was just as Image.

How was your experience with it?
The thickness is just right.

[Points to note]
Although it is Cut to shape with the bottom,
The bottom of the box floats a little on the circular projection.
This section was hollowed out with Cutter.

How did it compare to other products?
No comparison has been made since it is a dedicated product.

Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The bottom of the box floats a little when it hits the circular projection.
If this part is also Cut, it fits with Exactly. View detail

Rear Box [B32NB]
GIVI
Rear Box [B32NB]
Japanese Webike user
5/5

Replaced E300

[How is it used?
I use it for commuting and touring, so I put Rainwear and BagOthers in it.

Was the one you received as per Image?
It was just as Image.

Was the installation difficult?
No problem at all since it is a replacement from the same Mono-lock E300.

How was your experience with it?
I am satisfied with the slightly increased capacity and the square shape, which eliminates wasted space.

[Included Parts:were they on?
It was all there

[Was there anything that disappointed you?
Nothing. View detail

Mono Lock Case [E43NTL-ADV]
GIVI
Mono Lock Case [E43NTL-ADV]

Fits: Others

Japanese Webike user
4/5

Perfect for cargo bed Size

Both capacity and size were perfect for CT125. Inner bottom plate is also included, so you can move it around with ease. ・・・・
The internal claws of the open/close lock sometimes hit the luggage and make it difficult to lock.
Installation is done by drilling two holes in the OEM cargo carrier and using the space in the cargo bed for a total of four locations, secured with the included brackets. View detail

Corrugated Plate
GIVI
Corrugated Plate

Fits: Others M6

Japanese Webike user
5/5

For KIJIMA's Rear Carrier

When I changed the Rear Carrier of my CT110 HUNTER CUB to a KIJIMA Rear Carrier, I purchased this product to install a Honda OEM Option Rear Box that I had already installed before. The result was right. View detail

MONOLOCK Universal WIDE Base [MP70N]
GIVI
MONOLOCK Universal WIDE Base [MP70N]

Fits: Others

Japanese Webike user
5/5

stable

With the standard Plate that came with the E43NTL-ADV.
Well, okay, it was rattling loud.
I changed to this and wow, where is that rattling!
I don't think Drumstick would hit the market for another $1,000 or so less. View detail

4123FZ Mono Rack Fitting
GIVI
4123FZ Mono Rack Fitting

Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX

Japanese Webike user
3/5

Technology.

Installed on a 2022 h2sxse after model change
Need to expand the hole because the fixing screw has been changed from m6 to m8.
We also need to get a new Screw (we use m8x45 and m8x40 as Quantity:Buy 2pc each)
And SmallerScrewQuantity:Purchased additional 2pcs because they were not long enough. I forgot the length.
It took me a whole day to install it because I was a beginner because I had to remove all the covers and tail lamps from the rear.
The Bracket is inserted between the Frame and the Fender, but since the 2022 Fender will have a sensor to detect blind spots, it is quite heavy and could not be done by one person.
Also, the fitting kit is fixed with a screw on the Tandem Footpeg, but it cannot be fixed because of the helmet lock, and even if the helmet lock is removed, it cannot be removed because a special screw called one SIDEScrew is used. I tried to remove the helmet lock, but I could not do so because it uses a special screw called one SIDEScrew.
Finally, I purchased a footpeg from the new KawasakiOnLineShop! (8,000 yen (´ωTranslated) Tohoho…)
Finally, Plate for Monokey is available in m5 and m7, but m7 is more Refreshing and Recommendation. It is a bit expensive, but you can find it at .... View detail

[Repair Parts] Wiring Set
GIVI
[Repair Parts] Wiring Set

Fits: Others Universal, その他 general purpose

Japanese Webike user
4/5

Used for terminal attachment to M5MBase

Stop lamp is installed on E43 (Stop lamp Wiring for S350 is diverted to UniversalBase),
Used for base side wiring because the base was changed due to a transfer.

The claw position with the Base is not aligned, so it wobbles, but I had no problem if I fixed it with glue.
The wiring length is also sufficient, so it may be easy to distribute. View detail

[Repair Parts] Universal Base Repair Parts
GIVI
[Repair Parts] Universal Base Repair Parts

Fits: Others

Japanese Webike user
5/5

killing two birds with one stone

I bought GIVI which was installed on my SUPER BOLDOR which I only ride Touring, so that I can install it on my DIO which I bought for commuting.
GIVI removal and installation is now very convenient due to the one-touch system. The only problem is that the DIO110 OEM carrier can only be attached to the front of the car, so it is better not to put heavy objects on it. View detail

TREKKER OUTBACK [OBKN42] Aluminum Mono Key Case
GIVI
TREKKER OUTBACK [OBKN42] Aluminum Mono Key Case
Japanese Webike user
4/5

Not to mention the goodness of the Parenthesis, functionality is also excellent.

[How is it used?
Mounted on CL250 using the company's UniversalBase plate.
Was the one you received as per Image?
It was generally as per the Image. There was a thin coating of protective oil and speckling when I opened the package, so I wiped the whole thing up and it cleaned up. The color tone varies with the light and Monitor settings, so if you are concerned about it, you should see the actual product.
Was the installation difficult?
Installation to the base plate is very easy with one-touch. This time, we had a hard time installing the base plate because it was installed on a car model that is not compatible with the base plate.
How was your experience with it?
It looks like a parenthesis, has a large capacity and is easy to use.
As for Waterproofness, there may be individual differences, but it seems to be adequate because I encountered a guerrilla downpour and the contents did not get wet. It might be better to check the waterproof property in advance by applying a shower or something like that.
[Included Parts:were they on?
The key isQuantity:It consisted of 2pcs, Rubber Bush for base plate, and Instruction Manual.
If you are using the UniversalBase plate, use the Rubber Bush that comes with the base plate. The Rubber Bush supplied with the Case is not used.
[Was there anything that disappointed you?
The case insoles are a little unreliable; the material seems to be urethane, but I'm worried about its durability because it is thin. View detail

[Repair Parts] Monokey Base [E251]
GIVI
[Repair Parts] Monokey Base [E251]
Japanese Webike user
3/5

Without it, the Monokey case cannot be installed.

[How is it used?
Mounted on CL250. Small modification is required as it is a non-Manufacturer recommended installation.
Was the one you received as per Image?
Since the material was plastic, I thought it would not be that strong, but I was surprised that it was quite sturdy. I was surprised to find that it was quite sturdy. There was no bending or pulling and the quality was solid.
Was the installation difficult?
Since the installation was out of conformity, it was difficult to align, etc.
How was your experience with it?
The Monokey case is securely attached and can be removed smoothly without rattling or snagging.
[Included Parts:were they on?
Bolt & Nut4Quantity:Set, 4 pieces of mounting hardware, 4 base plate side seat golds, base plate lid, 6 screws for fixing the lid, Instruction Manual
These were included in the package. The lid fixing screws can be installed in the middle two places in addition to the designated four places, but since you have to drill your own holes in the lid before fixing it, I think four places are sufficient.
[Was there anything that disappointed you?
I am slightly concerned about the BALI residue on the Base plate edge. Since overseas products tend to leave these areas as they are, this is to be expected rather than expected, but if you are concerned about it, you may want to treat it. View detail

EA115BK Waterproof Bag
GIVI
EA115BK Waterproof Bag
Japanese Webike user
5/5

Large enough for CUB

Used for CROSS CUB110.
I use it on the Tandem seat (in front of the Rr Box).
I thought it might be a little small at 40L, but the roll top allows you to put more and more in the top. I think it is large enough and looks balanced for CUB.
I like it because it matches my GIVI Rr Box.
Two hooks are provided on the One Side for adjusting the tension of the elastic band.
I ordered it for the rainy season, but as soon as I bought it, the rainy season ended... I haven't checked its use in the rain or its waterproofness yet. View detail

Option For E134S Backrest V47
GIVI
Option For E134S Backrest V47

Fits: Others V47

Japanese Webike user
3/5

The price is not acceptable. So I give it 3 stars. No problem with the function. Drill is required for installation!

The regular price comes to over 10,000 yen including tax, which is honestly unacceptable.
However, I don't know if it will cost this much or if it is an Option Commercial.

Looking at the texture of the product, it is solid for the price. Also, Box is a product that is exposed to ultraviolet rays day and night, as well as to the elements. [Color] You must be Clear.

For installation, you will need a drill.:Quantity of the blade as a Set:Large sturdy if there is a Set. And since the other party is resin, a cheap one will suffice.
The patterned paper included in the package made positioning very easy, and I was able to drill the holes with generally no hassles.
*Drill the first positioning hole is a Large cut, so be careful with the first shot.

It is a feeling of use, but from Passenger who has been using Backrest in the box for some time, Usually no problem." This is the evaluation of the company.
It used to be an OEM box, or maybe it came with the backrest originally.... Considering the Gold amount this time, well, it is expensive.

Still, for those Tandem warriors who are allowed to keep their Large Motorcycle by doing Tandem, this Backrest is a must-have equipment.
If this exemption will make your motorcycle life more comfortable....... View detail

E161 Inner net for OBKN58
GIVI
E161 Inner net for OBKN58
Japanese Webike user
4/5

Exclusive Design and just the right size

This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q View detail