Reviews
![TREKKER OUTBACK [OBK37PACK2] Aluminum Mono Key Side Case](https://img.webike-cdn.net/catalogue/images/126869/98492_TS.jpg)
GIVI is as it should be.
I am satisfied with both the usability and quality. It is very easy to attach and detach, and I look forward to long touring. View detail
![CAM Pannier Holder [PL3112CAM]](https://img.webike-cdn.net/catalogue/images/91664/96665_01_TS.jpg)
Fits: SUZUKI V-STROM650, SUZUKI V-STROM650XT
Just fit Suzuki V-Strom 650 XT 2023
After several communications with Customer Support regarding fitment, I was able to confirm the fitment and purchased the product. Just fit the car body and I am satisfied. View detail
It's convenient
It is a little heavy, but has the sturdiness that only the genus Gold can provide.
Capacity:Pair (for Left and Right) The 72-liter capacity of the "C" is quite enough to hold a large number of items.
I don't use a Seat bag as much as possible, and I don't attach a Top box because it is too Rear heavy.
It was the right choice for this Pannier.
Pannier is an expensive purchase, including the mounting bracket, but I think it is cost effective.
View detail
Just the right Size for daily use!
I had been riding without the box for a while, but after all, I had already known the convenience of the box once, and I couldn't stand the inconvenience of not having the box.
Although sold separately, installation was easy with the Carrier for the SUPER CUB.
I had a little trouble choosing the Size, but I decided on a 32L capacity because I thought this was about the right capacity considering the Size of the car body, and it turned out to be the right choice.
The helmet (ARAI Tour cross3) I use can be stored without any problem, and there is plenty of room for the items I carry with me on my commute to work and on my daily trips, plus my shopping baggage.
The gold panel, which is a feature of the limited edition model, was not glaringly gold, but rather modest, and it was good that it did not look out of place when installed on a very plain green CUB.
The only complaint I have is that the string attaching part connecting the lid to the body part was ruined within a day of installation.
This is not an inconvenience when using the system, so I have left it as is.
View detail
![Special Carrier [DAYTONA Original]](https://img.webike-cdn.net/catalogue/images/54393/77639_TS.jpg)
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
If you want to put a GIVI box on a SUPER CUB, install it at the same timeRecommendation
Many people seem to be struggling with the loading position of the GIVI box on the CUB, as it seems to be much closer to the back.
Knowing such a voice, DAYTONA prepared the donpipe parts, so we purchased them along with the box.
I didn't see JA44 listed in DAYTONA's compatibility chart, but my car body (JA44 Latter term) I was able to install it without any problems on the
Installation is as simple as tightening the bolt at the top of the rear suspension, and even amateurs with tools should have no problem installing it.
The key loading position also fits in a good place on Balance, and we have no complaints.
However, when I went to a wooded area after installation, the box and my buttocks often hit each other when driving in Standing, so it might have been better to move it a little closer to the back……w
It would be nice to be able to adjust the box back and forth a bit with the location of the mounting holes on the Base of the box.
View detail
![Mono Lock Case [E43NTL-ADV]](https://img.webike-cdn.net/catalogue/images/32552/95342_01_TS.jpg)
Used for Hokkaido Touring in September 2022.
I bought this for my NMAX 155 Rear Bock with Inner BottomMatte, Backrest, Net & HookStandard Equipment and I think it is inexpensive. I think this size is good for NMAX155. I put Rain Suit and other items in the Net, but they did not fall off. I think this Net is an excellent product. I tried to find a picture, but I could only find this one. Sorry. View detail
![Side Case [E22N]](https://img.webike-cdn.net/catalogue/images/108716/90668_TS.jpg)
Loading Up
[How is it used?
Usually installed and used to increase loading capacity.
Was the one you received as per Image?
Slightly Small swing
Was the installation difficult?
One-touch
How was your experience with it?
Removal was no problem.
[Included Parts:were they on?
[Was there anything that disappointed you?
The keys are cheaply made and not comfortable to use.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
First Box
This is my first time buying a Rear box, and I had only heard of the GIVI brand, and I was sure that it was the right brand for me to choose. I chose this box because it is a moderate large size that matches both my 400 and 250.
It was the right decision. It is not too large and not too small. The logo plate is slightly different from the regular color. The logo plate is slightly different from the regular color. The color in the picture is close to Pink, but the actual color is close to Gold as the name suggests. There is no special feeling, Futsubu." The product is made by GIVI and is large and sturdy. I am satisfied with it. So far no water has come in. I feel that it is not easily scratched.
Not sure about Painted or Unpainted. I purchased Unpainting this time, but I am not sure if it is better to have it already painted or not? I was wondering until the end. Please refer to the article that describes in detail.
Best buy for Rear box beginners.
View detail
![Monolock Case E260 MICROII [E260NX]](https://img.webike-cdn.net/catalogue/images/78184/17449.PT05_TS.jpg)
26L with Base and plenty of capacity.
Quantity in UniversalBase:I did my first GIVIDebut because it was affordable at around 10,000 yen for the set.
I was surprised that it was bigger than I imagined, but it is stable and seems to be just right for a few days of petit touring.
View detail
![[Repair Parts] Base Rubber [Z2710]](https://img.webike-cdn.net/catalogue/images/8434/91743_01_TS.jpg)
Purchased as Repair Parts
GIVI's Monokey case I was looking for one of the base rubbers attached to the base plate of the TREKKERSeries TRK46B, because one of the base rubbers was missing.
I checked DAYTONA's website and found that it is listed as Repair Parts and GIVI. Z126A] I had originally arranged to purchase this because it was part number 90606, but when I removed the original and checked it, the shape seemed to be different, so I removed it once, searched again, found this one, and purchased it.
The single item sold as repair parts is a big plus because it is a special shape and cannot be replaced.
It is a large thing to confirm with the actual thing, not just what is written on the website.
View detail
GSX1300R HAYABUSA + SW-MOTECH + GIVI (2nd)
the other day
GIVI GIVI:Limited edition MODEL Mono-lock case E43GOLD(2M) Purchase the
Review Submission.
https://www.webike.net/sd/25844307/
This box has the same contents as the other one, but it suits my Motorcycle better.
Additional purchase (sweat)
Was the installation difficult?
Mounted on SW-MOTECH's Rear Carrier
How was your experience with it?
We have not gone touring yet.
[Included Parts:were they on?
It was there. UniversalPlate comes standard."
Other items that would be helpful
When installing alone, it is easy to drop the bolt, so be careful of grooves, etc. below.
Hexagon is Size5
Bolt is M6
View detail
![Monolock Case Option (for B42) Inner Bottom Mat [PB42N]](https://img.webike-cdn.net/catalogue/images/92832/22128_TS.jpg)
Exactly to 42L.
I used to use 100s of non-slip Matte, but it is pleasantly Exactly givi 42L! (Is it obvious?) 。
Cushioning is perfect and not too thick, so I don't think I have to worry about the Box losing too much capacity. I was surprised that the shipping arrived folded in half, but there were no creases.
View detail
I am satisfied with the capacity as expected
The lock mechanism was defective the first time I received it, but it was replaced with a new one as soon as possible and I was able to get it back in time for the touring.
It blends in with White body as shown in the photo.
It does not look too large from the rear, and since it was installed just in front of the seat opening/closing position, it does not protrude backward either, which is good.
The storage space is as expected, and even a large Jet helmet YamahaZENITH.YJ-22 fits neatly, and rain gear, gloves, etc. also fit with room to spare.
View detail
It is best to have a reliable Manufacturer.
I was considering purchasing a very inexpensive Chinese box from Amazon, but after reading some reviews that said it fell off while running, I decided to install one from a famous manufacturer such as GIVI or SHAD.
I've been using it for about 6 months and it hasn't fallen off while driving.
I only do day-trip touring to hot springs, so I have no trouble with the capacity.
I installed it on a CB125R, but it still looks ugly even with 30 liters..,
Convenient, though. (^_^;)
View detail
I've always wanted one.
GIVI for peace of mind
I would like to use it for a long time.
View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
Variable capacity is good
[How is it used?
I had been using GIVI's ST602 Tank LockBag (4 liter capacity) for a long time, but I wanted something with a larger capacity, so I purchased this product, which is not too large and has a variable capacity of 5 liters at its largest.
Was the one you received as per Image?
Compared to the ST602 I had been using, the width and depth are about the same length, and the height is about 1.5 times higher. As expected, the size is not too large, but just right.
Was the installation difficult?
I installed it on a KTM390DUKE using GIVI's AdapterBF33, but the Material that comes with the Bag:The Plastic Flange could not be installed without a little shaving and machining with Cutter.
The bag originally contains a thin insole, but the urethane sheet used for packing the product was just the right thickness (about 5mm), so we cut it out at Scissors in the same shape as the insole and put it under the original insole.
How was your experience with it?
Needless to say, the Tank LockSystem is convenient, but it is also convenient to be able to add more luggage on the go, thanks to the variable capacity system. In the case of KTM390DUKE, it is convenient to lock the handlebar until it is fully locked.:Pair (for Left and Right) The Bag was not interfered with even if it was cut to 2.5mm.
[Included Parts:were they on?
Material:Plastic Flange included.
[Was there anything that disappointed you?
When installed on 390DUKE, Material:It is a bit troublesome that the PlasticFlange has to be modified (cutter the part that covers the Screw hole a little) before it can be installed.
View detail
![Top Case Fitting for Monolock [SR1191]](https://img.webike-cdn.net/catalogue/images/104416/1_165032128479988800_m_9wdoa_l_TS.jpg)
Fits: HONDA CRF250L, HONDA CRF250L〈S, HONDA CRF250 RALLY, HONDA CRF250 RALLY〈S
Genuine Givi Top Case Fitting for Monolock for CRF250 2021
Not really a part I have fitted to one of these style bikes before but the customer wanted one so I got it from Webike at a better price than elsewhere. Not a hard part to find which did surprise me as these bikes don't usually want these fitting. I already had a few other parts in my order and luckily they were smaller ones, so I had them all shipped together to save on cost. EMS delivered my order in 5 days from shipping which was great. The box was fairly large as this is a large part but Webike pack things out very well so none of the smaller parts got any damage. The rack fitting is very well made, the welds look super tough and the painted finish is flawless. It came with all the instructions needed and the bolts and other parts were all included. Fitted in no time and the customer is very pleased with the outcome. Thanks Webike. View detail
![[Repair Parts] Inner Bottom Matte [PE43N E43]](https://img.webike-cdn.net/catalogue/images/32552/94990_01_TS.jpg)
Pricey, but in perfect shape♪
GIVI E43 GOLD (2 million unit sales commemorative model) I put it on the
To begin with, the box is a decent size, but my ADV helmet doesn't fit in it, so I went up against the wall and bought this one (lol).
The things you put inside are surprisingly Dance." Therefore, it is safer to have a solid Inner.
The price is expensive, but it comes with Exclusive Design, so you can rest assured that the things inside will be safe!
View detail
![Monolock Case ANTARTICA Rear Box [B42NB]](https://img.webike-cdn.net/catalogue/images/92600/1_162630224377635300_m_uz63x_TS.jpg)
Expected
The box itself is a true GIVI product, and I have no complaints about it.
Unfortunately, the attached Universal Mounting Base cannot be used to mount it on a motorcycle.
View detail
![MONOLOCK Base [M5M] for FZ Series](https://img.webike-cdn.net/catalogue/11160/60145_1_TS.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
neither good nor bad
Requires an optional mounting jig, but can be securely fastened.
Radio pliers should be present for installation.
View detail