Reviews
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
Focus on appearance
I don't normally do Tandem, but I personally think it will improve the look, so I bought it. I didn't have an electric drill, so I wasn't sure how to drill the Case, but I was able to drill a preliminary hole with the Drill and then pry it out with thin Scissors. I am very happy with the look and feel of the case. View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
For Tandem
We rather often do Tandem as a couple, but GIVI's B47 hurts where the back hits, so we bought a Backrest in preparation for long touring.
You need to drill holes for mounting, and I'm concerned about water immersion, but it also included RubberWasher, so I wonder if it's Large sturdy.
The inside of the B47 is positioned to be drilled, so it's not a problem if you drill a 6.5mm hole as per the Construction Manual for easy installation.
The Cushion is also softer than I expected, so they said the comfort during tandem has increased.
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
It's a good balance!
Case itself purchased from an acquaintanceSizeI bought the wrong product, but the acquaintance was a book I heard that you are going to put a Backrest on the car so I bought it together with the car and installed it
To install it, drill a hole and use a Phillips Screwdriver to drill the screw from inside Quantity:Just install 2pc
There is a mark on the inside of the lid, and you need to make a hole for the screw After opening and tentatively checking the hole position, the hole was expanded to screw size Because there is a seat like RubberWasher, you can work easily with a little gap
The purpose of this model is the balance in appearance
The material is different from the appearance, it is a soft Cushion rubber, and it is weatherproof The sex seems to be pretty good there
View detail
If the price is a bit cheaper - - -
Backrest is also replacing with Case's replacement.
Since Mono - lock 's Backrest which I used so far was a flat shape, it was not good at the back of Tandem, but since it is curved in the shape of the back, it is said that it became very good as Backrest I got a word of praise.
I made a hole in Case after a long absence, but I am nervous.
Disadvantages are high.
Perhaps this is the price of the product itself, but if you compare it with the price of CaseBody, hey, hey - - -
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
To B 47
It is hard to understand in the photograph but attached Backrest to B 47.
I was surprised to see that it was soft and different from what I saw.
Drill with holes according to the attached pattern paper and stop with Screw. Easy if you have a tool.
View detail
Fits: Others B47, KAWASAKI VERSYS-X 250, Others B37
It sounds softer
I bought it because it is said to be compatible with B 37. Installation can be done easily according to the instruction manual. It is softer than I thought it was a touch feeling, so it seems to be appreciated by those who are Tandem. I think that there is better than there is none at all.. View detail
If it is a bit cheaper
It is for E450. Case opens easily because it is Plastic, hole processing is essential.
When I got my daughter the other day, it was because Box hit my back and it hurts so I thought it was expensive but I bought it.
If you install, cut off the mount written in Italy, paste it on Case and open a hole from over it OK.
Diameter is M6. It was 5, but when I tried to grab the M6, it fitted without problem.
Screw Because I could not see the hole, I thought I was going to get over it, but I was relieved to go straight in unexpectedly.
(About 15 minutes in the whole process)
I will think that the back did not hurt, that it was easier and that the investment effect was effective.
I will have VANVAN active during the transfer from now.
View detail
It has attached to GIVI V46 by BMW R1100R. If there are even tools, such as an electric drill, since the paper pattern is also contained, it can attach without it taking 30 minutes. -- me -- intentional -- directions -- some of phons -- it attached
It has attached to GIVI V46 by BMW R1100R.
If there are even tools, such as an electric drill, since the paper pattern is also contained, it can attach without it taking 30 minutes.
-- me -- intentional -- directions -- some of phons -- it attached downward.
It is because he wanted to unite with the Line of a lid.
the position which is equivalent to the back depending on the mounting angle of a Trunk is delicate -- かもしれませ -- if ~ backseat is specification, I get Aikata to come and consider that it is [ a feeling of a Fit ] higher to decide a position by on-site doubling.
View detail
[Webike Monitor] At the time of the Tandem touring, it attached so that a Passenger might not get tired. In order to be unable to say anything since oneself cannot feel, but for human being who rode on back to say, if there is nothing wh
[Webike Monitor]
At the time of the
Tandem touring, it attached so that a Passenger might not get tired.
In order to be unable to say anything since
oneself cannot feel, but for human being who rode on
back to say, if there is nothing when it is, I will think in general that there was an effect as expected by if very well different at the unexpected time.
If those for whom anything does not have a tool about
attachment since a drilling process is required do not make
preparations but it purchases, or will not be found very much just for a moment.
View detail
Since the paper pattern is also attached, drilling is also easy. The comment of tan DEMA are also very best.
Since the paper pattern is also attached, drilling is also easy.
The comment of tan DEMA are also very best.
View detail
When a tandem was carried out, even a little Kon had a crevice between the back and a box. It is the favor of this backrest and is crevice dissolution. It seems that it becomes possible to also give the waiting for a signal, and it became quite ea
When a tandem was carried out, even a little Kon had a crevice between the back and a box.
It is the favor of this backrest and is crevice dissolution.
It seems that it becomes possible to also give the waiting for a signal, and it became quite easy (^o^) Although attachment requires a drilling process, since the location in which a hole is made is put in an instruction manual, if it is used, a hole site arrangement is easy.
(^_^). It gets bored with making a hole immediately with an electric drill.
I made the hole with the drill of the one size down from instruction manual specification.
the direction opened at least in this size -- yes, it is touch.
(*^_^*). However, there is waiting for arrival of goods and it may be kept waiting so long.
View detail
It is used by V46 attached to VFR800. Since the tandem was carried out in many cases, it purchased for the passenger. By that, the following becomes a passenger's comment. - If there is no backrest and it will lean, the back will become painfu
It is used by V46 attached to VFR800.
Since the tandem was carried out in many cases, it purchased for the passenger.
By that, the following becomes a passenger's comment.
- If there is no backrest and it will lean, the back will become painful, but if it is, even if it is leaning, it is hard to get tired.
- It was thought that it was convenient that a little larger one tends to lean.
- Since it is fairly hard, the softer one is good.
They were things.
View detail