Reviews
![MONOLOCK Base [M5M] For FZ Series](https://img.webike-cdn.net/catalogue/11160/60145_1_TS.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
Currently in use
I have no problem with the functionality and performance
The only downside is that when the Mono-lock case is not in use, the
The plastic cap cover for hiding the bolt hole at the time of the base installation may fall off
The holes after the dropout are so lame
After the Base is installed, it is better to take measures to prevent the plastic cap cover from falling out, such as glue, etc
Plastic Cap cover does not use Cap cover and Quantity:Set sales
Item #90160
I wish they would only sell this Plastic Cap coverSingle Item!
View detail
![Tubular Pannier Holder [PL1144CAM]](https://img.webike-cdn.net/catalogue/images/29606/94453_01_TS.jpg)
Solid
Africa Twin and TREKKER OUTBACK [OBK37APACK2] To Quantity:I bought it to set
It is not so difficult to install it, I installed it referring to the video of installation on YOUTUBE It wasn't that difficult However, drilling into the Rear Fender requires careful positioning
Only OEMs are sturdy, and even if you stand and jostle with the Vania Case on, it won't distort
View detail
![Fitting [3113FZ] For Monorac](https://img.webike-cdn.net/catalogue/images/43148/96602_TS.jpg)
Solidly built and secure Trusted GiviBrand
I have used the KRAUSER Top case in the past, and I would like to use KRAUSER again this time But I chose Givi because it will be discontinued in the future
I was worried about the Mount from the appearance, but it is actually a very strong design & spec It's waterproof and can withstand even the heaviest specs It is
The design also has a high degree of affinity with the vehicle and is highly satisfying
View detail
It is easy to install.！
Used in the Racer 900
When refueling, although the Cap does not open completely, there is no harm in refueling itself
Even with that, you can't stop using givi's Tank Lock once you've used it!
View detail
![Fitting For Mono Rack [SR2139]](https://global.webike-cdn.net/photo/impression/0c/0cabdf413191ed88da5a18b04f9f4d98L.jpg)
Exclusive Fitting for each Motorcycle
It was installed on a 2018 Yamaha TRACER 900GT
Top case is not so good looking, but when I consider the loading, I always put it on because it is essential for me personally It is
We chose GIVI for the following reasons
I wanted to use my GIVIMonokey top case
It can be pimped out with Exclusive Fitting for each motorcycle
The bracket from the Rear Fender made it seem more rigid
Installation took a bit of work
There was a detailed installation video on GIVIChannel on Youtube, so I thought there was plenty of room for it
To make the bracket stronger, we have to bite the reinforcing parts into the tail lamp bracket But..
We have a Blinker and a License Plate Light, so we can connect to the car body with a Cable It is
After biting the GIVI Bracket component, the length is not long enough and the Connector The situation is that it doesn't fit
After being troubled, I shaved the resin parts under Seat, and I used Extension Cable separately I made my own and connected it
I have used it for 1500km since it was installed
As expected, the 40L and 56L Large Monokey cases are securely fastened in place
It was stable at high speeds and on bad roads (only on pavement, not Dirt) without shaking
View detail
![Tubular Pannier Holder [PL1144CAM]](https://global.webike-cdn.net/photo/impression/90/909ce50301c90c716a8544fd67d336e6L.jpg)
It does not interfere with external Silencer At least not with AXIS La
The Africa Twin's OEM side case seemed to be difficult to use because it opened horizontally
I bought this for the installation of the GIVI side case that I have been using for a long time
Once upon a time when the GSX1300R HAYABUSA, the Top case and the Side case were GIVI I've been working on
The accuracy of the installation is much better than that time But it's still Made in Italy
You also need to do some heavy lifting in places
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports
You can't start without it
It is necessary to put the XS320 on the Africa Twin
I think mine is an improved model, or the shape and number of bolts were different
Personally, I'm a Quantity:I wish it was somewhat cheaper to buy a set, but I'm not sure
LargeI'm assuming that there are circumstances and efficiencies for people, and I'm taking the liberty of interpreting that
View detail
![Fitting [541FZ] For Mono Rack](https://img.webike-cdn.net/catalogue/11160/fitting_image-1_TS.jpg)
The price is high but firm
I think that honest top case 's Bracket alone is 20,000 yen rushing but because there is nothing else that looks good,.
The order of inserting Washer and Spacer at the time of installation is different from the original Paper and Paper which DAYTONA put in. I installed it according to the original Paper.
I made it as a gussle and there is no gratuity.
I also tried Tandem, but Tandem grip was also popular with Large passengers.
View detail
![MONOLOCK Base [M5M] For FZ Series](https://global.webike-cdn.net/photo/impression/00/00d8f1aefe415e5cb65c7578115d5885L.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
Satisfaction is high compared to UniversalBase
I am using it in 2018 formula Honda NC 750S DCT.
Originally Rear Carrier Box (E43NTLD) Although it was installed with the included UniversalBase, in order to make it a full Pannier, we changed it to this product in order to use Holder for exclusive Fitting and SIDE.
Although it is hard to understand in the photograph, the thickness increases and the texture is also high as compared with UniversalBase.
I am very solid, so I can feel relieved.
View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
"Oh, can I come in all this ...?"
Purchased along with GIVITank Lock purchase.
I watched webike's introduction video of GIVITank Lock several times and I decided to purchase because my willingness to buy increased. (https : / / www. youtube. com / watch?v=FpT1oOdOWew)
However, despite the fact that it seemed quite easy for the user to watch the movie, Bolt hardly got into Smooth and got into a difficult place. Even changing the combination of Bolt and hole was the same. Ultimately I turned my eyes all the way with force. Because I needed a little power, I thought that accuracy might be not good.
View detail
![MONOKEY Base [M5] For FZ Series](https://global.webike-cdn.net/photo/impression/80/8089e89ca472c0e47e1f4d7400f1ce5bL.jpg)
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
It looks pretty odd.
Monokey case can be installed with Single motion. I thought that I was going to be a little bit before purchasing, but I do not mind that much. I am familiar with the car body. View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP
After all there is no such thing!
Although I purchased a new one for replacing the car, GIVI has patronized it for 13 years, but once there is not this I can not do Ron Two. View detail
![MONOKEY Base [M5] For FZ Series](https://img.webike-cdn.net/catalogue/11160/42179_1_TS.jpg)
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
After all there is no such thing!
Although I purchased a new one for replacing the car, GIVI has patronized it for 13 years, but once there is not this I can not do Ron Two. View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP
I think it's good..
CB1300SB (2018) When I installed Pannier case V47 I purchased it in combination with? 7.
There is no interference with the car body, and it was able to be attached firmly.
Still, I can not go to Long touring with the Pannier case installed, but I did not feel any abnormality in the near field running.
It seems that Large will be active in future Touring.
View detail
![Mono-Key Base [M7] For FZ Series](https://img.webike-cdn.net/catalogue/11098/m7-91332_TS.jpg)
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
It is getting better than before.
I got lost in GIVI's V47 Base by? 5? And? 7 but it was correct and it was 7.
I was able to install it with Refreshing.
I do not feel uncomfortable feeling even if I take off Pannier case.
It seems that it can be used as a loading platform when there is no Case.
View detail
I think that it will be cheaper
Installation The disadvantage of the biggest Large is to decide the 20 mm hole place to Rear Fender.
When I remove OEM's Bolt and point it at an oblique direction, this is Kimo
Marking I can not reach it deeply even if I put drill and Drill into planned place! Operation conference.
I was inspired
Long Bolt with the same Size Sharpen the tip in a pencil shape and cut a little bit into that surface
I could position the mark perfectly as I screwed in my guy!
After that, I will place a Small meter Drill here and pilot hole is completed.
If you pierce from the Tire side with 20 mm Hole saw and have finished BALI then it is a quick victory
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports
Tank Bag is convenient Items
AttachmentExclusive Design is safe. Easy to install and necessities. Because Tank Bag is exclusively for Africa Twin, I thought that this attachment is included in a bundle. View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
As expected
2017 MT-09 Racer used with GIVISpecial rack SR 212 1 and Set.
Although it took time to understand the relationship between this case and Base, there was no problem as long as it was installed.
(For initial top case installation)
It seems possible to install another Size, but I chose it because it seems that the fit is more beautiful.
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports
I am satisfied with Africa only
It is an adapter for Africa Twin.
Because Tank Bag is also dedicated, I thought that this Attachment should be included in Back.
View detail
![MONOKEY Base [M3] For MONORACK](https://img.webike-cdn.net/catalogue/13226/41211_1_TS.jpg)
Fits: BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R850R, DUCATI ST2, DUCATI ST3, DUCATI ST4, HONDA CB500, HONDA CB500S, HONDA CB750, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA VFR750F, HONDA VFR750F, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI ZR-7, KAWASAKI ZR-7 S
Design is good.
It is a replacement from Mono-lock. I think the product design is better than Mono-lock.
There is almost no case to remove the Case mostly now.
Depending on the shape difference with Mono-lock "Snap" There is a sense of precision to be fixed, during driving
There is neither shaking nor rattling noise.
Although I have used Mono-lock for over 10 years, purchasing MonokeySeries is recommended even if it is somewhat expensive!
View detail