Reviews
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
GIVI GIVI Mono-lock base
Was the one you received as per Image?
Same as in the picture.
How was your experience with it?
It is formed of resin but is rigid.
Because of the thickness of the resin, there is no feeling of easy twisting at all.
Purchased to use Mono Lock Case B37 Series.
Quantity:Set and removal is also very easy.
Excellent stability while driving.
The GIVI Logo on the SIDE is also good as one point because it is an accent.
The reverse side is slightly chamfered, and if you touch the edge of the reverse side when washing your car, you will get a sharp cut.
[Points to note]
When this Body is installed, it tilts depending on how the Bracket is attached.
To be installed only after being firmly aligned in height for Bracket dependence.
The rubber stopper that came with the box had a gap between the box and the stopper.
Box bounces around while running, making a popping sound.
This can be solved by changing to a 9.5mm Rubber stopper, which can be purchased from Spare Parts.
It would be a good idea to change it from the beginning.
There are no obstacles during installation.
How did it compare to other products?
I used to use MP60N UniversalPlate, but the rigidity is completely different.
UniversalPlate is also screwed down during installation, which inevitably results in torsion.
This product is solid, as it is a dedicated product.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think you should also enclose a 9.5mm Rubber stopper from the beginning.
View detail
Satisfied?
Not installed yet.
I just looked at Parts and it was beautifully done.
View detail
useful shelf
My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so I need to add a tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing the original tail rack. One point is fixed, the installation is very firm, and the quick-release floor is convenient for installing the GIVI's tail box. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The storage space of this motorcycle is relatively small, so you need to install the tail box. This GIVI Mono Lock shelf kit solves my problem, and it can be installed without changing the original factory's tail frame. More The point is fixed, the installation is very firm, and the fast -moleter floor is convenient to install the GIVI tail box. Powered by Google Translator View detail
GiviPannier holder for X-ADV2019
The RightBracket was fixed to the Exhaust SystemMounting Bolt by YouTubeetc., but now it is attached to the Frame, which must have been improved. The product is good and easy to install. I am satisfied with the product for X-ADV. View detail
GIVIPannier holder for X-ADV
I installed the X-ADV 2019 MODEL adapted product, and although it seemed to install the bracket at the Exhaust System Mounting Bolt on YouTube, the Pannier holder I purchased this time is not for the Exhaust System mounting position, but for the frame. However, the Pannier holder I purchased this time was to be installed on the frame, not on the Exhaust System mounting position. It seems that the installation position has been improved. It is easy to install and the quality is good and there is no rattling. View detail
Unavailable features
There is a claim that it can carry a U-Lock, but I can't find a U-Lock that fits this at Motorcycle supply stores. View detail
It is easy to install.
There are only a few parts, and it is easy to understand how to install them. View detail
New car installation
When I purchased tracer9GT, I asked the installation store to send it directly to me.
52Liter bock installed.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
Exclusive goods
I feel that it does not have to be a dedicated product. View detail
first purchase
It took a little time because of the Wiring process required. View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Made by GIVI for peace of mind.
Used on CB400, HORNET and PCX.
I laughed here because of the design of the look of the Top case when it is removed.
Personally, I think Parenthesis is good.
It is more expensive than other cheaper products, but it is robustly built.
As a base, it has many holes and cavities, so it can be universally installed depending on the device.
If you are interested in installing a Large-format Case and also care about its appearance, this is a product that we recommend.
View detail
SIDEPannier also needs this instead of the old one to put it on.
If only the top case is used, the 1146FZ for the old model is Large sturdy, but if SIDEPannier is to be added, it must be a combination of this 1192FZ of RH09Exclusive Design and PLX1192 or similar.
For a while, 1146 was also listed in Honda's Supplies Catalogue, so I installed it on my RH09 and used it, but I had to repurchase it when I went full Pannier.
Tools are Glasses Wrench, Hexagonal Wrench, and Box wrench Quantities:Set looks like it would be better to have.
View detail
Fits: HONDA CB650F, HONDA CBR1000RR, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SB, HONDA CB400SF, HONDA CB650R, HONDA HAWK11, HONDA CB1300SF, HONDA CB1300SB
Let's see if it's BF03 or BF30.
I have a CB1300SB22 and I initially ordered BF03 by mistake. I recommend you to check whether BF03 or BF30 is the one that fits your Motorcycle.
The installation is no problem, as it is done with 3 screws. However, the quality of the attached hexagonal screws is not so good... If you are concerned about it, you may want to replace them with StainlessScrews.
View detail
Fits: SUZUKI V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI V-STROM650XT
Easy to install
DL1000 V-STROM 650XT installed in 2022 (8BL-C733M).
Data was not yet available on the preliminary compatibility inquiry, so I bought it on the spur of the moment, but I was able to install it easily without any problems.
However, it was troublesome because the screws in the package were not individually packaged for each part, but were all mixed together, so I had to check the list order by myself at the beginning.
View detail
Required some modification for installation.
After ordering, I waited about 2 months for it to arrive.
The original arrival schedule was extended, but we ended up arriving as scheduled.
I thought the product PL5126 could be accepted for all years of BMW current G310GS, but the Instruction Manual in the packet stated that it is compatible with 2017-2019 BMW G310GS.
When assembled on a G310GS manufactured in 2021, the Bolt position of the Arm that attaches to the Right SideFootrest did not match.
I considered returning it. Cancellation, returns, and exchanges are not possible after an order has been received. So, we managed to install it by cutting and expanding the Bolt hole.
Also, when relocating the Rear Blinker, the Right SideBlinker's Wiring had to be shortened and extended.
It could not be pontooned easily.
View detail
Helmet holder is the key
The NinjaH2SX/SE has a helmet holder...
I can see how this product would be exempt from the basic application, lol.
For International Model? does not have a helmet holder or is it possible to install it according to the application of GIVI headquarters.
Although I trusted this information and bought it, I had a hard time removing the helmet holder first (^^ゞ).
One wayType Screw and the Screw that attaches to it are blindfolded, so it can be removed by force and finally installed.
I am using Fender Eliminator, so depending on the Kit, it may be necessary to change the Blinker position, etc.
View detail
GIVI
I'm buying a GIVI Case, so I bought a rack specifically for GIVI's SV650. It costs quite a bit, but it is sturdy. View detail
It's a dedicated Fitting thing.
I'd be happy to put a Base on Carrier.
Once attached, the Base is not removed.
I bought it because I wanted a dedicated Fitting thing.
It is indeed dedicated and Exactly fits!
I am very satisfied with the product and it does not rattle when running.
View detail
Ugly without Bag.
For MT-07, the Flange is offset to the front via the bracket, not directly above the fuel inlet, and is bolt-on for easy installation.
Basically, I believe the Bag is attached, but if you remove it, it becomes a Conveyor belt sushi plate Style.
Note that the Flange (Male) that looks like a plate is the Bag's Included Parts:.
View detail
Purchased to use one box for multiple units.
[How is it used?
Since we use GIVI boxes with D Tracker and FZS, it is very troublesome to replace the BOXMount base each time, so we decided to attach a Mount base to both units.
Was the one you received as per Image?
There was no particular minor change, and it was the same as the Base we have been using for D Tracker for some time.
How was your experience with it?
In order to take advantage of the LED stop-lamp attached to the box, the base's wiring is interlocked with the vehicle's brake wiring to work with the brake.
[Points to note]
It is better to temporarily assemble and install the BOX and check the positional relationship before final tightening. In this case, after final tightening, I tried installing the BOX and found that the position needed to be corrected, so I had to start over from the beginning (laugh).
Other items that would be helpful
Opinion or request to Manufacturer:In the meantime, shouldn't there be an instruction manual? I have installed it on a D Tracker before, and it was Large sturdy without the instruction manual.
View detail