Reviews
Purchased for Repair because it was rusted.
I got this screw from a friend who gave me a GIVI box… I took it apart and found that it was rusty and would come apart if I removed the rust. I am glad to be able to order such a minor part from you! View detail
Use only LED Lighting Parts
Purchased to add High Mount Stop Lamp to GIVIRear box.
Various parts are included in the kit, but only LED Lamp parts are used.
Installation is easy from the BoxReverse side, and I extended the wiring myself with an Extension Cord to the bottom of the Seat. The wiring does not look good, but it is not visible from the outside.
It is an exclusive product, but the price was a bit high for just the Lamp component.
Reference and
The color of the Base of the BoxBody is more than Red. [Color] Smoke is more noticeable when lit.
Around Lamp (Inside) The reflective material was stretched over the
A hole of approximately 7mm is drilled in an inconspicuous location at the bottom of the Box.
View detail
Exactly because it is OEM Product
The inside of the Case is uneven, so I thought about making my own, but decided to purchase an OEM Product.
It looks Refreshing and very satisfying. But Cost performance is bad.
I was aware of this, but the amount of content is reduced. As a result, I am glad I purchased it.
View detail
Used for terminal attachment to M5MBase
Stop lamp is installed on E43 (Stop lamp Wiring for S350 is diverted to UniversalBase),
Used for base side wiring because the base was changed due to a transfer.
The claw position with the Base is not aligned, so it wobbles, but I had no problem if I fixed it with glue.
The wiring length is also sufficient, so it may be easy to distribute.
View detail
Exclusive Design and just the right size
This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q
View detail
Flat cushioning material
The bottom is flattened and the Material is soft, so it replaces cushioning material and is gentle to luggage.
Since the matte capacity is reduced, it can be removed depending on the application.
View detail
Aftermarket parts are very helpful.
Purchased for Repair as Rust came out.
These fine Aftermarket parts are really helpful.
I hope they will continue to do so.
View detail
Fits: Others E26NCD, Others E26X, Others E26N, Others E300N2, Others E30TN, Others E42NS, Others E33, Others E300
As a spare because it breaks regularly.
We use Boxes in multiple vehicles and change Boxes about 5 times a month. At that frequency, it took about 4 years to crack.
The Box will not come off if broken, but this part will fly off when the lid is unlocked, so I buy one and keep it as a Spare if it is broken.
It is inexpensive and inconvenient if it breaks, so I will buy it, but it is sad that the price has gone up so much.
View detail
I went away and bought it.
I was using it without screwing it down and it blew up somewhere, so I had to repurchase it.
Screw fastening is a must, but I am concerned about the strength of the Screw and Screw hole.
(Because it needs to be removed every time it is retightened, which is about once a year.)
I am satisfied about the price and the texture, and I am glad that I was able to purchase it at a reasonable price.
You can check the compatibility on the DAYTONA site.
View detail
Contact protection Cap.
[How is it used?
It is installed to protect the Stop-lampWiring contacts when the GIVI box is removed from the vehicle body side Mount base.
Was the one you received as per Image?
Since it is only fixed by inserting the two Pins inside the protective Cap, it seems like it might come loose and come off due to vibration, but so far it is safe.
Was the installation difficult?
Simply place the protective cap over the contacts and push it in. If you push it in too tight, it will be difficult to remove, so push it in with moderate force. When removing the cap, insert a thin slotted screwdriver into the gap and gently pry all the way around the protective cap.
How was your experience with it?
Unfortunately, it is not waterproof, so before covering with a protective cap, a thin layer of grease is applied to the contact points to prevent rusting.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it was going to provide protection anyway, it would have been nice to have waterproof performance as well.
Other items that would be helpful
Point or hang of installation:Do not push in hard.
Availability of Instruction Manual:Instruction Manual is not included.
Opinions and requests to Manufacturer:Waterproof performance would be nice.
View detail
Flat bottom, no slipping.
I'm starting to think it's a little pricey, but the OEM is Just fit for the bumps! The capacity is a little less, but the Flat bottom makes it easy to use because it doesn't slide around. View detail
Utilization to E43
I bought it to divert other than the Lamp part.
I think it's better to wear a high mount lamp when installing the box because the box makes it difficult to see the tail lamp.
Both the base, the bottom of the box and the top of the box are molded so that wiring and terminals can be attached, so they are not compatible, but they can be mounted with no problem.
Because the Lamp part cannot be pimped out, WaterproofLED Tube is attached and connected to the upper terminal.
I'm thinking it would be nice if it was possible to draw in 3 terminals, although it's 2 at the moment, so that I can use USB power supply etc. inside the box, but does anyone else have any sympathy for this?
View detail
Necessary for scratch prevention
I think it's absolutely necessary for scratch prevention! I'm surprised it didn't come standard in the first place! Other third-rate manufacturers have them on the top and bottom! But the third-rate stuff is so cheap! I think it's good because it's well made! View detail
Although it took a bit of trouble to install, it is safe to attach
Mono-lock case (E350) I incorporated it into FLOWSeries. For installation, Drill of 8 mm diameter and Hexagonal Wrenchetc of Small Type. And it took quite a while to drill a hole in the bottom of Case. I think that it is difficult to successfully install it unless you have some technical skill. However, if it can be mounted safely, it will contribute safely as High Mount Stop Lamp. I think that it is better if the brightness of the LED is higher at a slightly lower price. Also, the Power Cord for the lower side of Case was too short for my case.
(The degree of recommendation is "Yes" if it is conditional -. )
View detail
Fits: Others E370, Others E108
I think that it will become a safety measure
I think that it is not difficult if installing as far as the Instruction Manual according to the instructions, if you can do Maintenance eggplant of Motorcycle.
However, please translate (Please enter here) Since the picture of Instruction Manual of the version is blurred, it may be a little troublesome to compare with the foreign language Instruction Manual.
When putting Box on Motorcycle, it will be quite high, so I think that it will work well with a small amount of light.
There was Light Bulb Type in the description of the item, but it was Red Shining LED.
View detail
Fits: Others E370, Others E108
I wonder if it's going to be a backward appeal a bit.
Product description was written as Light Bulb Type, but the item that came at hand was an LED.
I was able to install without making a mistake irreparable while losing somewhat.
Translation (Please enter it here Instruction Manual may be a bit kind of unkind, but I think that you can install it if you can do daily maintenance of Motorcycle or a little Custom.
View detail
CB600F HORNET PC41
Purchase Wire Set to use GIVI B 47 with LED attached to BW 'S 125 also on HORNET.
I also wrote it in my diary, but it installed quite a bit hard..
With this, you can relieve the back of Large type car such as Torrack.
View detail
To B 47
I installed it in BWS 125.
Supplied translation (Please input here Manual and English Version Worked while watching the manual.
English is based on photos.
Remove the part of Helmet in under Seat of BWS and let Cable pass through the mounting hole of the Grab Bar and interrupt the Wiring of Stop-lamp. (EarthBlack - Brake is GreenYellow, Blue is Tail lamp)
Lamp does not turn even if I hold Brake after installation!
It seems that the contact at the lid of B 47 did not go well. Adjust it and confirm the lighting. It is safe..
I will do the work of CB 600F at a later date.
View detail
It rusts.
I bought it because I got rusted about GIX's Box.
I fixed it in a place hard to see, so I was not careful.
This time I painted it and used it.
I wish it was a little more rusty.
View detail
To GIVI E430 VISION,
GIVIGIVI : Retrofit Lamp kit (LED Type) I installed the S350 E350 Option. The lower BOX is common, easy to attach. The upper part becomes your own work. It was nice to be brighter than I thought. From the beginning, if you buy a BOX with settings, it's easy.
View detail