Reviews
Size feeling is good but BALI is all over the place.
Used with Dio110.
We use another box in GSR250 and sometimes use it because it has a Mono-lockSeries pedestal.
Size-wise, it is just right for both Scooter and GSR, but the handles were covered with BALI.
The enlarged Large photo may be hard to see, but it looks pretty bad.
I don't feel like my hand was cut and injured, but I wonder if I shouldn't expect high quality at this price point? Or was it just a ha Gap product? That is the thought.
The color was also clearly divided into shiny black and matte areas, so we polished it once with Yamalube.
When I saw the actual product at 2 Rinkan, it didn't have this quality, so it may just be a ha-gap product.
In terms of capacity, it goes without saying that there is plenty of room for KABUTO's KAMUI III, and the "Snap" feeling when closing the lid is very good, providing a sense of security.
Even in the rain, there is no feeling of water entering.
Considering the price and ease of use, we are satisfied with the product, but the only disappointment is the quality aspect of the exterior.
View detail
attachment
Easy installation for beginners
Tank Bag range is broadened.
View detail
We recommend Spray for rust prevention before installation!
Carrier is rusting all over the place. Rust. I bought it to refresh it. To be honest, it is an excellent part with high durability, but it rusts a lot, so I think it would be better to take the time to apply a seal coat, etc., and spray it with rust prevention spray before installing it! View detail
Suitable for touring or daily use?
Motivation and Selection
I am a 57 year old man living in Large Osaka who commutes by motorcycle daily on a Z250 with Endurance's Carrier stay installed. Since my workplace is an indoor bicycle parking lot, I could hook my helmet to the mirror and leave it strapped to the carrier on days when I bring my rain gear. The reason for purchasing the Top case is that I will be relocating to a rural area and will be parking my Blue empty bike at my new place of work. I thought it was essential to be able to store rain gear and a helmet when necessary, but there were many types of top cases and I had no idea what liter size I should buy, so I went to a local motorcycle store and asked for a hearing ring. I went to a local motorcycle shop and had a look around and was told that 37L was about the right size.
【Installation】
Since my motorcycle does not have a center stand, I had a hard time installing the carrier base, especially the first bolt. It is recommended to have someone help you. Also, I used a ratchet wrench to tighten the bolt because it requires more force than expected due to the anti-looseness type nut. A simple L-Type Wrench will give you a hard time.
[Feeling of use]
The helmet has to be placed at an angle, but it can be stored with rain gear.
On the other hand, disappointment point 1) Cloth and strings such as rain gear storage bags often get chewed up when closing the top lid. (need hang) The backpack of 30 LClass, which I carry every day, has to be squashed down a lot to fit in the bag (I didn't take this into consideration). However, it is good because the balance of the appearance also changes to a large size though the room will come out with 37Type L which is 20mm taller. I would have been fine if I had chosen a smaller backpack. I knew this, but it is not enough capacity for touring use.
Conclusion
I think the size of about 35L is the best balance for a 250CC motorcycle. I would like to enjoy commuting and touring in my new place of living.
View detail
parts shortage
The product was very well made, but the screws to attach the top case were not included. View detail
Just the right Size for an overnight stay.
I use MONKEY for hiking in Satoyama where it is difficult to park my car. It is just the right size to hold my hiking gear and SLR camera. After trying various ways, I found out that if I tap the top lid hard from above, it locks and sometimes I close it like this. I sometimes close it this way. Since it is a plastic lock, I guess it is just like that. I am a little worried that the top lid might open while driving. I used to use Henry beguine's MSize, which has about the same load capacity, but this one has a better locking feeling on the cargo bed and is more secure. View detail
![CAM Pannier Holder [PLO1178CAM]](https://img.webike-cdn.net/catalogue/images/91664/PLO1178CAM_TS.jpg)
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports
attachment
Installation required a deep socket, and the exhaust system had to be removed, making installation a bit of a hassle. View detail
Technology.
Installed on a 2022 h2sxse after model change
Need to expand the hole because the fixing screw has been changed from m6 to m8.
We also need to get a new Screw (we use m8x45 and m8x40 as Quantity:Buy 2pc each)
And SmallerScrewQuantity:Purchased additional 2pcs because they were not long enough. I forgot the length.
It took me a whole day to install it because I was a beginner because I had to remove all the covers and tail lamps from the rear.
The Bracket is inserted between the Frame and the Fender, but since the 2022 Fender will have a sensor to detect blind spots, it is quite heavy and could not be done by one person.
Also, the fitting kit is fixed with a screw on the Tandem Footpeg, but it cannot be fixed because of the helmet lock, and even if the helmet lock is removed, it cannot be removed because a special screw called one SIDEScrew is used. I tried to remove the helmet lock, but I could not do so because it uses a special screw called one SIDEScrew.
Finally, I purchased a footpeg from the new KawasakiOnLineShop! (8,000 yen (´ωTranslated) Tohoho…)
Finally, Plate for Monokey is available in m5 and m7, but m7 is more Refreshing and Recommendation. It is a bit expensive, but you can find it at ....
View detail
![[Repair Parts] Monokey Base [E251]](https://img.webike-cdn.net/catalogue/images/43275/90197_01_TS.jpg)
Without it, the Monokey case cannot be installed.
[How is it used?
Mounted on CL250. Small modification is required as it is a non-Manufacturer recommended installation.
Was the one you received as per Image?
Since the material was plastic, I thought it would not be that strong, but I was surprised that it was quite sturdy. I was surprised to find that it was quite sturdy. There was no bending or pulling and the quality was solid.
Was the installation difficult?
Since the installation was out of conformity, it was difficult to align, etc.
How was your experience with it?
The Monokey case is securely attached and can be removed smoothly without rattling or snagging.
[Included Parts:were they on?
Bolt & Nut4Quantity:Set, 4 pieces of mounting hardware, 4 base plate side seat golds, base plate lid, 6 screws for fixing the lid, Instruction Manual
These were included in the package. The lid fixing screws can be installed in the middle two places in addition to the designated four places, but since you have to drill your own holes in the lid before fixing it, I think four places are sufficient.
[Was there anything that disappointed you?
I am slightly concerned about the BALI residue on the Base plate edge. Since overseas products tend to leave these areas as they are, this is to be expected rather than expected, but if you are concerned about it, you may want to treat it.
View detail
![MONOKEY Base [M5] For FZ Series](https://img.webike-cdn.net/catalogue/11160/42179_1_TS.jpg)
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
I still can't deny that it looks cheap.
It can't be helped that it is a dedicated part, but it still looks cheap.
There are many parts to install, and they have not been installed yet. As an amateur, I feel like I have to work hard in terms of menbarrel to install something this solid, but I am looking forward to seeing where it goes, so I will make time to do my best.
View detail
![Mono-Key Base [M7] for FZ Series](https://img.webike-cdn.net/catalogue/11098/m7-91332_TS.jpg)
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Screw hole mismatch
It did not fit the fitting (bracket) slightly, so I had to modify it a little. If possible, it might be safer to have someone with knowledge or a store install it. View detail
![[Repair Parts] M2X12CSK Tapping Screw MP60/MP70](https://img.webike-cdn.net/catalogue/images/107316/24267_TS.jpg)
Repurchased because I lost it
I was using it without screwing it on and the lid flew off and I had to repurchase.
I'm happy to get OEM Product, but I'd appreciate it if they sell it for $100 or so.
(The cosmetics are bad, but it's OEM, so it can't be helped.)
It seems that there is an instruction to use screw lock to stop the screw, but when I want to re-tighten the screw that fixes the base and carrier, it is troublesome to remove the smallest screw&If the screw mountain dies, it will be troublesome.
View detail
It's suitable for a long drive in a GEAR car.
Just right for two pieces of Rain Wear and a Riding jacket.
One of them has a built-in Protector and is not bendable Type.
View detail
![Tank Lock [XS307]](https://img.webike-cdn.net/catalogue/images/106885/93803_TS.jpg)
Sufficient capacity.
5LFuel Tank enters Limit, but Fastener is tight.
Because of its Largeness, it cannot bend forward and rapid acceleration is impossible.
View detail
![Mono-Lock Base [M7] for FZ Series](https://img.webike-cdn.net/catalogue/11098/m6m91333_a01_TS.jpg)
Unavailable features
There is a claim that it can carry a U-Lock, but I can't find a U-Lock that fits this at Motorcycle supply stores. View detail
Fits: HONDA CB650F, HONDA CBR1000RR, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SB, HONDA CB400SF, HONDA CB650R, HONDA HAWK11, HONDA CB1300SF, HONDA CB1300SB
Let's see if it's BF03 or BF30.
I have a CB1300SB22 and I initially ordered BF03 by mistake. I recommend you to check whether BF03 or BF30 is the one that fits your Motorcycle.
The installation is no problem, as it is done with 3 screws. However, the quality of the attached hexagonal screws is not so good... If you are concerned about it, you may want to replace them with StainlessScrews.
View detail
![Monolock Case ANTARTICA Rear Box [B42N-ADV]](https://img.webike-cdn.net/catalogue/images/105397/22124_TS.jpg)
Impressions from the feeling of having put it on.
For now, the first look is mostly BALI.
Also, the FittingBase is a bit difficult to install.
I have a SKYWAVE, and the box seems to be quite a bit further back than the Fender, so I was wondering if you could equip it with a reflector on the rear of the side.
I'm anxious to buy it and put it up.
The manufacturing is cheap for the price.
View detail
Ugly without Bag.
For MT-07, the Flange is offset to the front via the bracket, not directly above the fuel inlet, and is bolt-on for easy installation.
Basically, I believe the Bag is attached, but if you remove it, it becomes a Conveyor belt sushi plate Style.
Note that the Flange (Male) that looks like a plate is the Bag's Included Parts:.
View detail
![MONOLOCK Base [M5M] For FZ Series](https://global.webike-cdn.net/photo/impression/0f/0f08bb9c2bd8803292ffeab224dcd1e4L.jpg)
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
UniversalBase." A necessity for racks that cannot use the
[How is it used?
Racks where UniversalBase is not available." It was necessary because it was
Was the one you received as per Image?
Material:Because it's plastic. "Something like this. I think so
Was the installation difficult?
Mounting the rack is easy. (Although the process of attaching the rack to the vehicle body varies in difficulty depending on the type of vehicle.)
How was your experience with it?
Neither good nor bad
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
Material:I guess I'm worried about durability since it's Plastic.
[Availability and clarity of the Instruction Manual
For this item. Translation of the Supplement (enter here Instruction Manual) is enclosed, but from this one. Rack Instruction Manual. I would like DAYTONA to think about this, because I think it is necessary for the
[ITEMS TO BUY TOGETHER
Instant Adhesive for Resin 。
Material" to cover mounting holes:PlasticCap" is the first of its kind in the world. Case drops out when not in use." I think it is better to use it as a preventive measure.
View detail
A little low on capacity
It came with the car from the time it was delivered, so it was very useful right after delivery. The box can be opened and closed with one-touch, so it is easy. If you put your souvenirs in the bag, it is already at its limit. If you are planning to stay overnight, it would be better to use a larger capacity bag. If you are planning to stay overnight touring, it would be better to use a larger capacity bag.
I replaced it with a 39-liter one, partly because it was not my favorite shape and partly because I was using it for touring and it was inconvenient due to lack of capacity.
View detail