Reviews
![TREKKER OUTBACK [OBKN42] Aluminum Mono Key Case](https://img.webike-cdn.net/catalogue/images/51503/98488_TS.jpg)
Not to mention the goodness of the Parenthesis, functionality is also excellent.
[How is it used?
Mounted on CL250 using the company's UniversalBase plate.
Was the one you received as per Image?
It was generally as per the Image. There was a thin coating of protective oil and speckling when I opened the package, so I wiped the whole thing up and it cleaned up. The color tone varies with the light and Monitor settings, so if you are concerned about it, you should see the actual product.
Was the installation difficult?
Installation to the base plate is very easy with one-touch. This time, we had a hard time installing the base plate because it was installed on a car model that is not compatible with the base plate.
How was your experience with it?
It looks like a parenthesis, has a large capacity and is easy to use.
As for Waterproofness, there may be individual differences, but it seems to be adequate because I encountered a guerrilla downpour and the contents did not get wet. It might be better to check the waterproof property in advance by applying a shower or something like that.
[Included Parts:were they on?
The key isQuantity:It consisted of 2pcs, Rubber Bush for base plate, and Instruction Manual.
If you are using the UniversalBase plate, use the Rubber Bush that comes with the base plate. The Rubber Bush supplied with the Case is not used.
[Was there anything that disappointed you?
The case insoles are a little unreliable; the material seems to be urethane, but I'm worried about its durability because it is thin.
View detail
![[Repair Parts] Monokey Base [E251]](https://img.webike-cdn.net/catalogue/images/43275/90197_01_TS.jpg)
Without it, the Monokey case cannot be installed.
[How is it used?
Mounted on CL250. Small modification is required as it is a non-Manufacturer recommended installation.
Was the one you received as per Image?
Since the material was plastic, I thought it would not be that strong, but I was surprised that it was quite sturdy. I was surprised to find that it was quite sturdy. There was no bending or pulling and the quality was solid.
Was the installation difficult?
Since the installation was out of conformity, it was difficult to align, etc.
How was your experience with it?
The Monokey case is securely attached and can be removed smoothly without rattling or snagging.
[Included Parts:were they on?
Bolt & Nut4Quantity:Set, 4 pieces of mounting hardware, 4 base plate side seat golds, base plate lid, 6 screws for fixing the lid, Instruction Manual
These were included in the package. The lid fixing screws can be installed in the middle two places in addition to the designated four places, but since you have to drill your own holes in the lid before fixing it, I think four places are sufficient.
[Was there anything that disappointed you?
I am slightly concerned about the BALI residue on the Base plate edge. Since overseas products tend to leave these areas as they are, this is to be expected rather than expected, but if you are concerned about it, you may want to treat it.
View detail
Large enough for CUB
Used for CROSS CUB110.
I use it on the Tandem seat (in front of the Rr Box).
I thought it might be a little small at 40L, but the roll top allows you to put more and more in the top. I think it is large enough and looks balanced for CUB.
I like it because it matches my GIVI Rr Box.
Two hooks are provided on the One Side for adjusting the tension of the elastic band.
I ordered it for the rainy season, but as soon as I bought it, the rainy season ended... I haven't checked its use in the rain or its waterproofness yet.
View detail
The price is not acceptable. So I give it 3 stars. No problem with the function. Drill is required for installation!
The regular price comes to over 10,000 yen including tax, which is honestly unacceptable.
However, I don't know if it will cost this much or if it is an Option Commercial.
Looking at the texture of the product, it is solid for the price. Also, Box is a product that is exposed to ultraviolet rays day and night, as well as to the elements. [Color] You must be Clear.
For installation, you will need a drill.:Quantity of the blade as a Set:Large sturdy if there is a Set. And since the other party is resin, a cheap one will suffice.
The patterned paper included in the package made positioning very easy, and I was able to drill the holes with generally no hassles.
*Drill the first positioning hole is a Large cut, so be careful with the first shot.
It is a feeling of use, but from Passenger who has been using Backrest in the box for some time, Usually no problem." This is the evaluation of the company.
It used to be an OEM box, or maybe it came with the backrest originally.... Considering the Gold amount this time, well, it is expensive.
Still, for those Tandem warriors who are allowed to keep their Large Motorcycle by doing Tandem, this Backrest is a must-have equipment.
If this exemption will make your motorcycle life more comfortable.......
View detail
Exclusive Design and just the right size
This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q
View detail
![Mono-Key Base [M7] for FZ Series](https://img.webike-cdn.net/catalogue/11098/m7-91332_TS.jpg)
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
I think it's cool.
I think it's one of the better looking ones in the Monokey base.
Installation is easy
However, I think the price is a bit high ….
If you're going to put M5 on, I think it would look better with M7 on.
View detail
![[Repair Parts] Universal Base Repair Parts](https://img.webike-cdn.net/catalogue/11160/31335_1_TS.jpg)
Purchased for additional cars.
I purchased this giviBox because I have been using several giviBoxes and I wanted to use the giviBoxes. View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Proven and good looking.
I think it's a little expensive, though.
I personally think it's the best looking of the Monokey base.
Installation itself is very easy.
View detail
Suitable for day-touring
It is perfect for day-touring.
Especially for Motorcycle with low payload.
View detail
![Pannier Holder [PL6410]](https://img.webike-cdn.net/catalogue/images/91664/96393_01_TS.jpg)
Fits: TRIUMPH Bonneville T100, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black
It broke after one year of use.
I installed it in TriumphBONNEVILLE or Quantity of the support after one year of installation.:Pair (for Left and Right) Both were broken. View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
Convenient and easy
Tank Lock type, first purchase,
I was confused with Type, which can be locked with a key to the vehicle Base.
Purchased this one due to its high price.
Wire lock as an anti-theft measure….
The purpose of using it is to put in and out Small Type Camera of …GoProetc.
Capacity is small, 6L, just right.
The waterproof cover and shoulder belt fit nicely inside the zipper on the top lid, and the cell phone compartment on the inside of the top lid fits an insta360 just right. The insta360 fits nicely inside the top zipper, so it's convenient when you are away from your motorcycle.
It is also useful as an accessory case when you get off the car without your camera, gloves, etc.
The feeling is … very convenient and easy to use!
To install, simply place it on top and it will be fixed to the base of the car body,
You will get used to it after the first couple of times when you remove it.
While driving, it does not bother me because of its small size in terms of capacity.
I don't feel much inconvenience in opening and closing the tank cap.
Overall evaluation of the product was satisfactory.
View detail
I was looking for an affordable Size and this is what I got!
I have been using GIVI products for a long time, but this time I wanted a side case to match the top case for touring.
The Mounting Kit was a great help. I was impressed with the firmness of the kit after installation.
The mounting screw holes, etc. were accurate and easy to install.
View detail
![Carrier [SR1190]](https://img.webike-cdn.net/catalogue/images/98119/23946_TS.jpg)
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
Large Satisfied!
I installed it on my PCX160.
With the Universal Carrier, it would appear to protrude from the Mono-lock base, but with this, it fits with the Refreshing and is rigid enough.
When installing, it is necessary to remove the rear cowl and drill a hole with a hole saw, but I was able to do this smoothly because I researched on the Net.
I put a Rubber Bush in the gap between the Cowl and the Carrier's prop, so it was a very good parenthesis!
View detail
![Pannier Holder [PLX3101]](https://img.webike-cdn.net/catalogue/images/91664/90534_01_TS.jpg)
Pannier holders are nice.
I purchased the Pannier case in addition to the Top Case and was very impressed with the Holder, which is an exact match for my car. I was very impressed with the Holder, and the installation position is also very close to the Exhaust System.
in a nice salty way. [Color] ClearQuantity:Pair (for Left and Right) The sense of balance was good.
View detail
![MONOKEY Base [M5] For FZ Series](https://img.webike-cdn.net/catalogue/11160/42179_1_TS.jpg)
Fits: HONDA NC750S DCT, HONDA NC750S, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, Others , HONDA NC750X DCT, HONDA NC750X DCT, HONDA NC750X, HONDA NC750X
I still can't deny that it looks cheap.
It can't be helped that it is a dedicated part, but it still looks cheap.
There are many parts to install, and they have not been installed yet. As an amateur, I feel like I have to work hard in terms of menbarrel to install something this solid, but I am looking forward to seeing where it goes, so I will make time to do my best.
View detail
Purchased for Touring
I purchased this product for my GB350S.
Rear Carrier uses DAYTONA's Multi Wing Carrier.
I thought it was too large for the Motorcycle size, but it was just the right size.
Installation is as simple as bolting the attached Base to the Carrier.
When running empty, it made a clattering sound, but there was no particular problem with driving.
One point of concern is that if you put the Key in the locked position while it is open, then close it from that position and press down, the key will
The cost will be high, so care must be taken not to marker it.
View detail
![Rear Box [E30RN]](https://img.webike-cdn.net/catalogue/images/75563/16976_TS.jpg)
I think the structure that allows the key to lock even when it is not completely closed is defective.
I have used several types of LargeSmall cases for GIVI products, but this is the first time for me to use the MonoLock type.
The old locking mechanism of early products, where the lock would get caught on something and prevent the door from opening, has been eliminated, but the fact that the door is locked even when it is not locked is a large drawback. Of course, the root cause is that the user does not check the well, but when I was in a hurry, I ran thinking that I had closed the door and was in a hurry to see if I had lost something after arriving at the destination.
It would be nice if the structure of the key could not be turned if it is not locked as in other companies' products, but I wonder Large why such a structure was chosen.
View detail
![Mono Lock Case [E43NTL-ADV]](https://img.webike-cdn.net/catalogue/images/32552/95342_01_TS.jpg)
Large doubles as Small
I used to use a 30L Top case, but I wanted more capacity for camping touring and other activities.
I took the plunge and bought this Case, which holds 43 liters, if I had to buy it.
As a result, I am Large satisfied.
I go to hot springs and buy souvenirs even for day-touring, so if this is all I have, I can use OnsenQuantity:Set + souvenirs can be easily accommodated.
It is very convenient and can easily accommodate a Bag to be used when getting off the Motorcycle.
Camping touring can also fit the luggage, so you don't have to worry about loading it.
The Silhouette of the Motorcycle is a little too Large, so the Motorcycle Silhouette seems to collapse a little, but it is much more convenient than that, so I am satisfied with Large.
View detail
Installed in 2023 MODEL.
Since the MODEL has been changed from Mounting Boltm6 to m8 since 2022, a little modification was necessary. View detail
Tank LockBag is convenient to use
I used GIVITank LockTank Bag in FJR. As you know, it is very useful because it can be detached with one-touch, so I do not have to take it off when I take a break. This time, I added a CRF250L to my CRF250L, and although I can install it on the RALLY50, I cannot install it on the L. So, I decided to use the Tank LockTank Bag. Therefore, I purchased this product in order to use Tank LockBag as a seat bag. View detail