Reviews
This is good!
The nail is attached to the tip and the middle, and when tightening up, let's bit the front nail "Push" You can turn Ring by operation. This is a function not found in ordinary Wrench, and the work difficulty level changes at all with just this. I definitely buy it.. I think that it is an essential item for the DUCATI system with no working space. I always botherly removed Rear suspension itself when I change the Large Kim Setting (In ordinary Wrench it is 1 / Good luck if you do 8 laps)
Thanks to this Wrench it has become quite easy.
Especially, it is Large that you can tighten easily.
However, since the value is expensive for the frequency of use, I thought that the price was expensive.
But "Time is Gold" So it may be better to be easier.
View detail
Fits: DUCATI Multistrada 1200, DUCATI Multistrada 1200S, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821, DUCATI Multistrada 1260
I'll do it Big
I did not attach ★ 5 with too much impression if I noticed, but this product is wonderful. It is a perfect score..
As you can select 12 Position like clock hands on the circumference of 2 cm radius, Riding Position which was cramped at NORMAL's Peg, it is extremely easy (Knee grip was also hot, but feeling that the legs naturally lie on Tank) became.
By NORMAL ratio is 2 cm Down. Although it is a small difference in figures, there was a big difference in ride in the ride comfort.
The only difficulty is that the price is high, but I think that even if you deduct it, it is a product that is too much.
View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Oil cooler guard
I installed it because the bouncing stones of the front wheel Tire etc. hit the Oil cooler.
Just remove the Cover around the Oil cooler and paste it with the attached Double-sided Tape inside the Cover.
Even if Double - sided Tape is peeled off, it is not worrying about dropping because it is Large bigger than Cover.
I am also solid, so I think I can firmly Guard.
View detail
Fits: DUCATI 959Panigale, DUCATI 1199, DUCATI 899Panigale, DUCATI 1199Panigale R
I am 168cm high, and had trouble dealing with the downhill gap, for the handlebar position was in a distant position. I haven't measured precisely, but I think you can bring the handle towards you more than the value indicated in the catalog.But,
I am 168cm high, and had trouble dealing with the downhill gap, for the handlebar position was in a distant position.
I haven't measured precisely, but I think you can bring the handle towards you more than the value indicated in the catalog.
But, you might crush your fingers between the handle and the tank when installing it.
Still it feels very comfortable when driving. I even feel that my motorcycle has been downsized.
If you feel that the handle is too far away, I recommend you to have this product.
Still, I'm worried about the fixation of the bar, for it is fixed with only one bolt. When I tightened the bar end, it once moved. I better re-tighten it periodically.
It is a little expensive, but I'm satisfied with it.
View detail
Fits: DUCATI MULTISTRADA 950, DUCATI Multistrada 1260, DUCATI Multistrada 1200
It purchased for YUPITERU/ATLAS wearing. Although a few was regarded as whether a front Meter disappears, it can check firmly.The high speed and the general road were good.Although there should just also have been a thing which can attach the Ante
It purchased for YUPITERU/ATLAS wearing.
Although a few was regarded as whether a front Meter disappears, it can check firmly.The
high speed and the general road were good.Although there should just also have been a thing which can attach the Antennas of
OP, it has been coped with by the Digi-meter Stay.
View detail
Fits: TRIUMPH Bonneville, TRIUMPH Thruxton, TRIUMPH Scrambler
It is exchange from the Axle Color of a NORMAL.Although the NORMAL is a product made from a Steel, it is a product made from an Aluminum here.Smoothness when the hand of Anodized surface preparation describes The difference by it being wonderful
It is exchange from the Axle Color of a NORMAL.Although the
NORMAL is a product made from a Steel, it is a product made from an Aluminum here.Smoothness when the hand of
Anodized surface preparation describes The difference by it being wonderful and being pure is clear.Durability also seems to be high as Manufacturer wording.
Although it is not primarily by the Parts felt vividly, the positive decrease of resistance is borne.I think that it will be in the state where there is more than [ no ] this in a firm Grease Maintenance with a Plus and this Anodized.
View detail
Fits: DUCATI 996S, DUCATI 996R, MV AGUSTA F4, DUCATI 916SPS, DUCATI 916SP, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO, DUCATI 749, DUCATI 749S, DUCATI 749R, DUCATI 748, DUCATI 748S, DUCATI 748R, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale R, DUCATI 1198
In attaching an internal pressure Valve, he thought that a rhm pressure specification vehicle was wearing recommendation of a Blowoff valve, and he would make it into the Blowoff valve of the same Manufacturer as an internal pressure Valve, but it is fair
In attaching an internal pressure Valve, he thought that a rhm pressure specification vehicle was wearing recommendation of a Blowoff valve, and he would make it into the Blowoff valve of the same Manufacturer as an internal pressure Valve, but it is fairly high --
Many things were looked for and it was made the new model of the AELLA.Seemingly the
function is a role which misses the rhm pressure which lost the place to go to by the internal pressure Valve in the Air cleaner --although the
feel is not known well, the way which is recommendation says -- it is -- ~.This Valve of the
AELLA is ♪ cheaper than the attached thing of the Manufacturer of an internal pressure Valve about by 10,000.
View detail
Fits: DUCATI Monster 821, DUCATI Monster 1100 EVO, DUCATI Monster 1200, DUCATI Monster 1200S, DUCATI Monster 1200R, DUCATI Monster Plus, DUCATI 848, DUCATI 899 PANIGALE, DUCATI 959 PANIGALE, DUCATI 1199 PANIGALE, DUCATI 1299 PANIGALE, DUCATI PANIGALE V2, DUCATI PANIGALE V4, DUCATI SuperSport 950, DUCATI SuperSport 939, DUCATI Scrambler Sixty2, DUCATI Scrambler 800, DUCATI Scrambler 1100, DUCATI Diavel, DUCATI Streetfighter 848
Although it was a mere Oil filler cap, since that authentic positive was a too much cheap Plastic, exchange of was done. attaching accuracy is satisfactory at all. -- comes, and although got to know, the portion of a k
Although it was a mere Oil filler cap, since that authentic positive was a too much cheap Plastic,
exchange of was done.
attaching accuracy is satisfactory at all.
-- comes, and although got to know, the portion of a knob turns to S character and it is easy to put in power.
Since he thought that processing this form took time and effort very well, it was GOOD in appearance.
View detail
Fits: DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER
[a Webike Monitor] -- -- since [ big-ticket ] a Parts, it was hesitating purchase, but it decided on purchase at last! Probably, it will be better to request a diffident direction from Schopp, although attachment was performed by itself. A
[a Webike Monitor] --
-- since [ big-ticket ] a Parts, it was hesitating purchase, but it decided on purchase at last!
Probably, it will be better to request a diffident direction from Schopp, although
attachment was performed by itself.
Although it ran after
attachment, probably because the former Setting influenced, it was a Cornering which becomes quite soft and is limp.
The rear spring was returned to the standard value, vehicle height was lowered, and when attenuation also raised and ran, the run changed.
Although it was not able to swell when the Axel was opened in the second half of a Corner, and a fearful thought was not able to be written and opened until now [
], after attaching this product, the standup very came to be very pleasant to come to open.
It is an indispensable Parts at 1098 systems of which he repents [ that what was necessary was just to have purchased honestly earlier and ].
View detail
Fits: DUCATI SUPER BIKE 916, DUCATI SUPER BIKE 916 S, DUCATI SUPER BIKE 916 R, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD796, DUCATI PAUL SMART1000LE, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI GT1000, DUCATI SPORT1000, DUCATI SPORT1000, DUCATI 999, DUCATI STREETFIGHTER848, DUCATI 999S, DUCATI 999R, DUCATI 996
When looking for the simple SLIDER50 which is not ostentatious, it arrived at this. Since axle part will look heavily sometimes as for an Axle Slider although a Frame slider becomes an Accent on a Design. It has attached in several minutes by the attach
When looking for the simple SLIDER50 which is not ostentatious, it arrived at this. Since axle part will look heavily sometimes as for an Axle Slider although a Frame slider becomes an Accent on a Design. It has attached in several minutes by the attachment can Tan. View detail
Fits: DUCATI MONSTER1100EVO, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S
1100 was attached and used although it was an object for 696. Since it trades with the Engine mount bolt, to attachment, a Maintenance stands and a Jack are indispensable. It is also important to fasten certainly with a regulation Torque according t
1100 was attached and used although it was an object for 696.
Since it trades with the
Engine mount bolt, to attachment, a Maintenance stands and a Jack are indispensable.
It is also important to fasten certainly with a regulation Torque according to a Manual.
Certainly [ as red a Stripe with a simple Design as an AELLA Logo becomes an Accent, and / Parenthesis ].
View detail
Fits: DUCATI Multistrada 1200, DUCATI Xdiavel, DUCATI MONSTER S4R, DUCATI DIAVEL, DUCATI Monster 797, DUCATI Monster 821, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI MULTISTRADA 1000, DUCATI SuperSport, DUCATI 848, DUCATI 999, DUCATI 749, DUCATI 1198, DUCATI 1098, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI Multistrada 1260, DUCATI Multistrada 1200, DUCATI Multistrada 1100/S
Although it was not a great Parts, resistance when turning a Wheel was completely different in front of exchange and in the back. The price is also for an AELLA? I think that it is easy to purchase.
Although it was not a great Parts, resistance when turning a Wheel was completely different in front of exchange and in the back.
The
price is also for an AELLA? I think that it is easy to purchase.
View detail
Monster796 was equipped. a Hold of the Step, and a feeling of operation of a Shift change (especially SHIFT UP) -- this point changes so dramatically that it is not it compared that it is pure. Again, a step position becomes front an
Monster796 was equipped.
a Hold of the
Step, and a feeling of operation of a Shift change (especially SHIFT UP)
-- this point changes so dramatically that it is not it compared that it is pure.
Again, a step position becomes front and a top and it becomes easy to carry out a Knee grip.
If also making
is dramatically solid, and is beautiful also for appearance and the
ease of riding is pursued, it will be a Recommendation rightly.
I think that it is a Parts which is not inferior to the
price at all.
If it dares to mention a dissatisfied point, it is only a thing which are hard coming to ride by riding before
with the relation which changes a seating position and which is & Become easy to get tired in case of a pure sheet.
The way to the extent that sheets are also conversely exchanged according to a Step may be good.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE (H.11 emission gas regulation vehicle)
Parts were replaced from the NORMAL and force came out at a stretch. tone quality has a thing near [ V-Twin ] a liter Multi by a heavy low in a low rotation region. Since sound volume changes considerably with load, by an idling condition, it is
Parts were replaced from the NORMAL and force came out at a stretch.
tone quality has a thing near [ V-Twin ] a liter Multi by a heavy low in a low rotation region.
Since sound volume changes considerably with
load, by an idling condition, it is quiet, and if it opens, it can feel crisp [ of a TWIN ].
It became thick not to mention
low-speed Torque also fell.
Although
after fire came out, it stopped only at making the Hose of secondary exhaust air blow a Sponge, and applying resistance.
I think that it is a good Muffler.
View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
[Webike Monitor] In order [ which protects the Oil cooler which says and which has a dent in coming out ] to & Hide, the Mesh of purchase honeycomb shape brewed the high grade feeling, and the dent of the Oil cooler was hidden in as expected.
[Webike Monitor] In order [ which protects the Oil cooler which
says and which has a dent in coming out ] to & Hide, the Mesh of purchase
honeycomb shape brewed the high grade feeling, and the dent of the Oil cooler was hidden in
as expected.
when boiling
and this part at the time of new car delivery of cars and having equipped with them, it was thought a few whether regret dented the
Core.
View detail
Fits: DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S2R1000, DUCATI MONSTER900, DUCATI MONSTER1000
The pivot bolt pure after equipping with the back step made from AELLA felt it very heterogeneous, and was worrisome. It got to know that the lineup of the pivot bolt made from AELLA of a certain time favorite was carried out, and purchased instantly
The pivot bolt pure after equipping with the back step made from AELLA felt it very heterogeneous, and was worrisome.
It got to know that the lineup of the pivot bolt made from AELLA of a certain time favorite was carried out, and purchased instantly (smile)! I think that it can equip easily if there is even a wrench since the ship fitter implement for exclusive use is attached to this product.
However, what it is easy to separate from in order to put three pins into the concave portion of a pivot bolt and to turn them is a difficulty.
Although the work which prevents our assigning the chip of a thick plastic bag and attaching a wound was carried out and being fastened, since the fit in lump became brave and a wound was not attached, either, it was a case of killing two birds with one stone (smile)!
View detail
Fits: DUCATI MONSTER1100EVO, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S
It purchases to MONSTER1100S. Although it is with the object for 696, 1100S can be attached satisfactorily. (However, it is impossible if it does not have an appropriate tool for attaching by oneself.) Maintenance stands, a jack, torque wrench
It purchases to MONSTER1100S.
Although it is with the object for 696, 1100S can be attached satisfactorily.
(However, it is impossible if it does not have an appropriate tool for attaching by oneself.)
Maintenance stands, a jack, torque wrench, etc. -- The logo of AELLA is also touch good.
View detail
Fits: DUCATI MONSTER S4R testastretta, DUCATI MONSTER S2R
A little handle authentic positive in DUCATI is purchased in order to attach a 22.2-mm domestic handle for difference feeling. Since it was a color of the clamp part, when there was GATA, I was disagreeable, but color fitted so that it might stick to
A little handle authentic positive in DUCATI is purchased in order to attach a 22.2-mm domestic handle for difference feeling.
Since it was a color of the clamp part, when there was GATA, I was disagreeable, but color fitted so that it might stick to a handle by touch as an aella truly.
View detail
Mr. Dealer -- -- I will put into the very first, if a car body is purchased! -- back step made to say. Though thought [ what thing is the best and ], it was afflicted by the amount of money, but it introduces at last. After worrying fairly, that
Mr. Dealer -- -- I will put into the very first, if a car body is purchased! -- back step made to say.
Though thought [ what thing is the best and ], it was afflicted by the amount of money, but it introduces at last.
After worrying fairly, that of Mr. AELLA felt it most beautifully and functional too.
Attachment did not have a little less than 1 hour and a so difficult thing.
It will be attached by most persons once it has seen the mechanism.
Although it has not been used in a circuit, when running winding, a firm weight shift can be performed, and the problem in the normal on which a guide peg slides on a step is also solved lightly.
Moreover, since it is an eccentric type, the mechanism in which loosen a little bolt and it changes a position is also easy, and rich in certainty.
Moreover, there is also no formality peculiar to a back step.
It completely has and makes it an automatically compact form.
This is just necessaries! A function and modeling beauty are recommended excellent pieces.
View detail
Fits: DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R testastretta, DUCATI MONSTER S2R, DUCATI MONSTER S2R1000
It is a riding step of AELLA Brando of wearing to own car S4RS. Generally as for the product of aftermarket parts, the step position is backing the pure twist, and, also in a pure twist, a front location (it is about 1 cm) can dare to choose this prod
It is a riding step of AELLA Brando of wearing to own car S4RS.
Generally as for the product of aftermarket parts, the step position is backing the pure twist, and, also in a pure twist, a front location (it is about 1 cm) can dare to choose this product.
For the strong single and twin of back torque, carry out some locations of a step with some Saki from experience when we have ridden on the single, and, in the inside of riding, the direction made into the appearance sensuously kicked with a step near at hand (it retreats that the hips are natural),
He thinks that an action is stabilized since it depends on a rear wheel and a load can be carried out greatly, and, also actually then, it was.
in fact, after exchange -- before -- furthermore, 笙ェ (smile) where whose constancy of the motorcycle the position fitted nicely and was improving greatly above all, although carried out as [ interfere / replace parts from before to the swing arm pivot bolt made from AELLA, and / again / in this bolt / the tip of boots ],
truly -- the product of AELLA -- it is .
When combined with this step, it is very wonderful, completeness is large, and the matching after wearing carried out UP! The natural fundamental operation engine performance which knowledge is very elaborate is a top class! It is a very wonderful product!!!
View detail