Reviews
Fits: DUCATI XDiavel, DUCATI PanigaleV2, DUCATI PanigaleV4R, DUCATI PanigaleV4, DUCATI 1299 Panigale, DUCATI 959 Panigale, DUCATI 1199 Panigale, DUCATI 899 Panigale, DUCATI StreetFighterV4, DUCATI StreetFighterV2, DUCATI Diavel1260, DUCATI Diavel V4, DUCATI Diavel
It is not a dress-up part
Just recently, I was a bit careless and stumbled upon a standing stone
The cost is the LeftMirror breakage and the cowl is this Slider, also AELLA's Thanks to the Engine slider and RearHookSlider grounding at three points beautifully Totally intact I would have preferred not to be on the scene, but the mounting position and dimensions of each Slider and Thanks again to AELLA for the power of your products
The SliderBody itself is not badly damaged It was decided to be Large as a cautionary tale to myself Preservation
Guard and Slider, which may have been turned into Dress-upItems, but, folks! Choose the right one
View detail
That's AELLA
I'm ashamed to admit that I had a careless accident recently, and I had a bit of a mishap on my feet I only had to pay for it by breaking the LeftMirror thanks to this Slider Completely intact, only a little Wound in the Bar End. front Axle Slider and Rear Suspension Hook combined Slider is also installed, but this is a great Grounded at three points The setting and the strength of the attachment position and the large diameter of the I'm still impressed with your work, Balance, etc You're the AELLA of course AELLA is a true functional beauty! View detail
Recommendation for those who ride in town a lot
In high speed driving and Winding, the NORMAL position was Exactly! But I bought it because I've been doing a lot of riding around town to work lately
The height of the Handlebar changes so clearly that you can feel the difference sensibly It is now easier to handle at low speed in town and when parking
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Titanium Damping Parts
I didn't know that Titanium had damping capabilities to reduce vibration
I didn't know that until recently (Polish)
I have several AELLA Parts on, so I'm not particularly suspicious of them
I didn't feel much of a reduction in vibration when I drove around the neighborhood, but fatigue over long distances I'm hoping for some relief
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
To be honest, I thought it raised eyebrows …
It was mentioned that you can reduce unpleasant vibrations simply by inserting it into the Handlebar End I only saw pictures of the Separate handle installation, so it works with the Bar handle as well I installed it to see if there was a difference between the two, but the vibration seems to have disappeared strangely
I haven't changed anything else around the Handlebar except for this part, so if there is a change, it's for sure I feel that this is the effect of Parts:Titanium products have expensive images, but I think they are reasonably priced and are a good product I can recommend it
View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
AELLA Side Stand Assist Hook
Great product, looks like what should have been there originally & also allows you to put the side stand down with your boot. Better than those coloured alternatives that look too glitzy. View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
good buy
It was easy to install with simple construction It's as light and dramatic as driving a Small Type GEAR motorcycle! It turns into a The price is a little high, but I was right to buy it because I have accumulated some points I recommend it View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
Good things are expensive
It is lighter than Clutch of SEROW 250 and KLX 250 for the effect of this product.. Weight of Clutch below 250?! Easy as Ideas. However, it can not be used unless it has a margin around the support point of the action part on the Clutch Wire Engineering side. It was Exactly to Ducati Scrmbler. It is a good quality because it is a scraped material of Aluminum parts, but if you have a Ball board you can make your own. I think that it may be a little cheaper. View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
AELLA AELLA for SCRAMBLER : Clutch Assist Plate
SCRAMBLER's Clutch is not originally heavy, but Dirtetc. When you run Quantity : 2pc I thought it would be best if finger manipulation could be done Wearing, it was a correct answer. It became the lightness of 250 cc or less?. It is Ideas that can be diverted to the Large type Motorcycle of similar mechanism. I think that women will absolutely be useful when used for the same model. View detail
Fits: DUCATI PAUL SMART1000LE, DUCATI ST3, DUCATI MONSTER S4, DUCATI MONSTER S2R1000, DUCATI SPORT1000, DUCATI SPORT1000, DUCATI GT1000, DUCATI MULTISTRADA 1000DS 1000, DUCATI MONSTER S4R, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD1100/S, DUCATI ST4, DUCATI MONSTER S2R, DUCATI MH, DUCATI MONSTER S4Rs testastretta
It's cool with Simple
Since I only saw this item Slider conforming to s2r I bought it. But I was able to surpass my expectation, because it was only this (I bought it without reserve) not, (What should I attach?) It changed into the idea that this is the only one. There is nothing in every point, it seems to do the perfect job.
It is difficult to install without a certain tool. Torque wrench is mandatory, Quantity : It is certain that there are 2 pc. (To turn one side to Bolt and the other to the Nut side and hold it while holding it down) For s2r Bolt was 14 mm and Nut was 15 mm. After that, when I pulled out the iron core that was originally attached, the hole of Engine and Frame shifted slightly. I think that this neighborhood depends on the type of car, but please be careful. I had a hard time putting an iron core for Slider.
View detail
Fits: DUCATI SCRAMBLER 800, DUCATI MONSTER 797, DUCATI MONSTER 821, DUCATI MULTISTRADA 950, DUCATI SuperSport, DUCATI MONSTER Plus, DUCATI SCRAMBLER Sixty2, DUCATI HYPERMOTARD939
It is cost effective.
I am using it for SCRAMBLERSixty 2. Clutch, quite dramatically, will be lighter!
I was touched as to whether the performance will change so far at this price.
It is quite Recommendation!
View detail
Fits: DUCATI Multistrada 1200, DUCATI Monster 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI HYPERMOTARD821, DUCATI Monster 1200, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100/S, DUCATI 1198, DUCATI 1098, DUCATI 848, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI Sports touring, DUCATI 959Panigale, DUCATI Sports classic, DUCATI Multistrada 1200, DUCATI SCRAMBLER 800, DUCATI Multistrada 1260, DUCATI PANIGALE V4
To Dress-up around Handlebar
Although it is a part with no performance change, I tried to replace it as it always comes in sight.
Champagne gold is luxurious without being flashy, I am satisfied.
View detail
Fits: DUCATI StreetFighter, DUCATI DIAVEL, DUCATI MULTISTRADA 1000, DUCATI SuperSport, DUCATI Multistrada 1100/S, DUCATI MONSTER796, DUCATI MONSTER 1200, DUCATI MONSTER1100/S, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S2R, DUCATI MONSTER S2R1000, Others Inner diameter:Φ14-Φ15
Exchange according to Handlebar
OEM Product may also be of luxury, but I attached it according to the exchange with AELLA's Handlebar.
It is also characteristic that it is becoming a Slider in the atmosphere that the shape is well calm.
View detail
Fits: DUCATI STREETFIGHTER, DUCATI Multistrada 1200S, DUCATI HYPERMOTARD939, APRILIA RSV4, KTM 990SUPER DUKE, KTM 990SUPER DUKE R, MOTOGUZZI MGS-01, MOTOGUZZI MGS-01 Corsa, TRIUMPH DAYTONA 675 R, DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, APRILIA RSV1000, APRILIA RSV1000R FACTORY, APRILIA RSV4, DUCATI 749, DUCATI 999, DUCATI 1098, DUCATI 1198, DUCATI 1299Panigale
High quality Lever
Foldable is too expensive - - - I thought it was wearing, but it was worth it.
Thanks to Bearing, it became clear that Fee Ring became Smooth, making it easier to adjust the power adjustment. It was my first time surprising that this has changed so much with Lever.
Good ones are good.
I have not confirmed the effect of Foldable yet, but the adjustment width is also large and it is worth replacing.
View detail
Fits: DUCATI STREETFIGHTER, DUCATI Multistrada 1200S, APRILIA RSV4, TRIUMPH DAYTONA 675 R, MOTOGUZZI MGS-01, MOTOGUZZI MGS-01 Corsa, KTM 990SUPER DUKE R, KTM 990SUPER DUKE, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4R, DUCATI MONSTER S4R, APRILIA RSV1000, APRILIA RSV1000R FACTORY, APRILIA RSV4, DUCATI 749, DUCATI 999, DUCATI 1098, DUCATI 1198, DUCATI 1299Panigale, DUCATI 848EVO
High quality Lever.
I exchanged with Brake side at the same time.
Although it was an effect, thanks to Bearing, the operation feeling became Smooth and it is worth replacing.
Adjustment width is also easy to adjust to Large and favorite position.
View detail
Fits: DUCATI MONSTER 821, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S, DUCATI Multistrada 1200 Enduro, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD939, DUCATI Multistrada 1260
To protect water pump
It is for DIAVEL, but it can be installed as it is on MONSTER S21200S.
I heard that the MONSTER S21200S tends to damage the water pump at the time of a fall, so it was installed at delivery.
I have not fallen yet, but the product of this Manufacturer is really texture so it became Dress-up.
View detail
nice produc
very good product, I am satisfied with my purchase it is difficult to find a handlebar for DUACATI XDIAVEL serious site Thank's View detail
GPS Mount
Bought the Zumo GPS mount for the 2017 Ducati SuperSport. Excellent fabrication/machining. Mounting plate is adjustable for angle and the mount has the exact amount of clearance for the GPS. Highly Recommend View detail
It is good for slip of footpeg.
I was dissatisfied with OEM's footpeg, but I tried to replace it.
You can make the position of footpeg variable by taking advantage of the original folding mechanism.
I set the position to be back without changing the height, but footpeg did not get in the way when stopping. I became easier to put on my feet.
Of course, even while driving, Knurl processing is quite useful for slipping
Although Cost performance is higher than expensive Rear Sets, the part of Knurl processing may have been rolled up a bit at around 3000?.
View detail
To Position adapted to Japanese body
Normal handle of MONSTER S2821 is wide in the sideways and does not match a little Japanese with short arms. Personally I was thinking that if you staggered in the Large Style the force got easier to enter and the width was narrow as it was, and a little squeezing was working.
It was this AELLA 's Handlebar LOW that was Don Pissha to this request.
Included items include Handlebar and easy Instruction Manual, and nearly the same shape as NORMAL, with Handle end cap of Material, a nice surprise.
Steel is Blackouted, it looks tightened at the time of wearing than NORMAL, and the luxurious feeling increases.
Of course, there was no problem with the precision of hole punching, but it was a truly Quality.
Even if the diaphragm is effective, I think that it does not interfere with Tank when cutting the Handlebar with full lock also attractive for the car model only.
It seems that the height will be 5 mm higher, but for the experience it is Same height as standard.. The width becomes narrower by about 20 mm and the squeezing effect is also effective, so it is easy to get on to Position.
Even if you stagger Large Luck, you can ride without becoming clinging to Handlebar. Thanks to the narrowing, the arms became Fit to Tank when the waist shifted, so it became possible to obtain unity with Corner very much.
Steel and car only, only for AELLA products, so the price is a little expensive so the stars are decreasing slightly but it is highly recommended for those who want to narrow the width and narrow the width at the height of NORMAL.
I will not lose it by buying it.
View detail