Reviews
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Side Stand is perfect!
Panigale and Streetfighter boots do not have good footing for most Japanese people. I am 177cm tall, but when I use a type of racing boots with the heel covered with a resin protector, like the ones from Pine Starz, the part where the heel hooks onto the side stand is too short and I slip and run away. When I am in the riding position, I can get it out with about a 50/50 chance, so when I am in good health, such as when I am refueling, I can stick it out a few times, but when I am tired, I can't get it out. No more." and I had to get off the Motorcycle and take out the Side Stand. If I had a normal leather or rubber bike, I would be able to get off the motorcycle and put out the Side Stand without any problem.
The AELLA product is almost twice as long as the AELLA product, so the Side Stand can be easily produced.
View detail
AELLAHigh Screen attached.
I generally like it.
The protective film was peeled off only at the screw holes, and then removed after installation and screw fastening.
View detail
Absolutely WRONG Slider Parts
Webike product page states they are for Ducati SF V2, but in fact they FOR PANIGALE V4 SP2!!! First the physical shape and installation points of received parts DO NOT match the photos shown on Webike prodcut page (which use an installation example of Ducati SF V2). Second the wrapping lable of the shipped parts clearlly stated "PANIGALE V4 SP2", NO words about SFV2. This is a completely stunned and wrong experience. View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Easy to use.
[How is it used?
STAND was purchased before the car was delivered because it was difficult to get it out,
I installed it immediately.
Was the one you received as per Image?
It was as Image in the picture.
Was the installation difficult?
It was easy to replace with Wrench.
Locktite is applied to prevent loosening.
How was your experience with it?
The Hook is in view even when straddled,
It is easy to STAND.
[Included Parts:were they on?
There was a Handling Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: DUCATI SCRAMBLER 1100, DUCATI MONSTER 797 Plus, DUCATI MONSTER 797
AELLA
Tilt when parking has been improved:?? View detail
Very nice improvement in shifting..but expensive
After just 5000km my stock shift lever had a heap of free play. I saw this Aella shifter with a bearing instead of a bushing and thought I'd give it a try. It's hugely improved the feel of the gearbox. The only reason I've taken a star off my rating is the price...but you get what you pay for. It's a luxury item, but luxuries are typically nice to have. And it weighs 100grams less than stock. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Center presentation
I used it to get the center out of the Caliper fixation. It could be installed normally without any problem. View detail
The price was high, but I'm glad I bought it.
good point
The width was shortened and became a natural position for me.
The shortened width of the handlebar riser allows the lever and switch box to be installed closer to the inside of the handlebar. This allows more room for the cable, and avoids the dangerous situation when using other handlebar risers, where the cable is too tight.
However, not all Risers can be avoided. Please try it at your own risk, with the feeling that you have no choice if it doesn't work.
I did not expect this, but the resonance point may have changed, and my hands are no longer numb from the vibration.
A bad point
I have the impression that it is expensive for one Handlebar (but the quality is good).
Use a thin Torx wrench to remove and install grips and switch boxes. What is Torque?" If you are not confident in your ability to do the work, please buy from the Shop and ask the Shop to do the work for you (see below). "A Friend in the Know." (The "Mere Old Man" is the most unreliable of all).
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
You can't have BALI.
When I tightened it immediately, it did not go in immediately, and when I took it out and checked the screw threads, there were many BALI and I had to shave them off with a file. After shaving, it went in smoothly to the end. Naturally, the anodized part was peeled off, which was unfortunate. The part will not be visible if it is tightened, but it was a shock to the manufacturer whom I trusted. I thought about returning it and exchanging it, but I decided not to because I thought I would receive something similar again. It is not a cheap product, so I wanted BALI to take care of it. View detail
Yep for me it works
Yep, in the case of my bike, this item works as advertised. Shifting feels more solid & deliberate. Easy to install so long all the bolts on the bike that need to come off, do so without putting up a struggle! View detail
GEAR loss will be eliminated.
I no longer have to go into Neutral.
I am very satisfied.
View detail
Certainly the vibrational frequencies are thinner!
Compared to before installation, the ThornThorn-like vibration between 3000 and 4000 rpm has become a little more mild. I would like to install a heavy bar end with Plus alpha from now on.
For your information, the product number is AT-W0006A for S1000RR to 18 years old cars.
I initially purchased AT-W0007 by mistake. The←s product is for S1000RR '19 and later.
View detail
Feet are Drill and determined.
[How is it used?
Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was easy.
How was your experience with it?
Beautiful feet.
[Included Parts:were they on?
Yes
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Installation is quite easy!
[How is it used?
QUAD LOCK was selected to mount the phone when Touring, and this one was selected with a 1InchBall stacked on top of it.
Was the one you received as per Image?
Yes
How was your experience with it?
There is nothing wrong with that.
[Points to note]
Tightening Torque:30Nm
How did it compare to other products?
So far Kaedear." and did not feel inconvenienced, but wanted to make the Handlebar area Compact.
Other items that would be helpful
Observe the installation point and hang/regulation Torque:30Nm
Items to be purchased together/The intermediate mount that connects this Body to the QUAD LOCK is required separately.
I reused my previous kaedear intermediate mount
( https://www.webike.net/sd/25611697/)
Opinions and requests to Manufacturer/None in particular.
View detail
The atmosphere changes when viewed from a distance.
Cap of RadiatorCap.
This is the only place where it is commonplace to have fully functional parts, so even if the surroundings were made of carbon parts, there was no color here.
However, there were no elaborately designed cap covers for complete decorative purposes in my favorite design.
CoolCap." I tried to find the "Mere Old Man" but there was no way to find it.
The surface treatment of the RadiatorCap had just started to fade, and I went to webike to get a new NORMAL and found this.
The exquisite texture of the machine processing, the discreetness of the design, and the subtle hilliness of the overall design to prevent water droplets and dirt from accumulating.
AELLA is the best in the market with its high precision installation.
Although it is a small component, it strangely gives the Motorcycle an enhanced overall texture when viewed from the side.
The price is a bit high, but looking at the photo of the TYPE 2, which was cut from a solid piece of wood, I think it can't be helped.
Finally, my RadiatorSide cover is made by Moto Corse and is designed along the Cap with no interference at all.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
OEM Product's plainness was unacceptable.
I have nothing to say. I chose this one because I wanted it to be gorgeous and I wanted it to match the Champagne gold line on the Body. View detail
It is harder to GEAR out.
Gear changing Touch is better. View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Effective for moving in the vibration range.
[How is it used?
Grip vibration reduction during driving
Was the one you received as per Image?
Exactly the same as the one in the photo shown.
Was the installation difficult?
It is very easy to remove the Bar End and install the collar.
How was your experience with it?
It does not eliminate vibration when driving, but it changes the rotation range at which vibration occurs.
Vibrations have been considerably reduced when driving except at high speeds up to now.
However, the vibration has not been eliminated, although it has been reduced,
If the situation remains the same for a long time, it will remain painful.
People who think this product is good for different people have different normal use RPM range,
There seems to be a clear division between those who think it is not effective at all and those who think it is not effective at all.
One Side of the collar has a Ring-shaped stripe, but the orientation is that of outward mounting.
The appearance is simple and thin, so it is not noticeable and does not feel like you are wearing it.
The construction itself is very nicely made and of very good quality.
[Included Parts:were they on?
Because it has a resin color that matches the Bar EndMounting Bolt,
To be used in accordance with the type of car.
A brief instruction manual is included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Even though the material is Titanium, I would like to see a lower cost.
It's not bad as a thing, but I think lowering it a bit would make it easier to get a good deal on a bad one.
Satisfaction level 3 in terms of Cost
View detail
Very good as Design
[How is it used?
Aiming to reduce Damage in the event of a fall
Was the one you received as per Image?
No different than the photo shown.
Was the installation difficult?
Because it is to be installed inside the exterior Cover (Cowl) from the 2023 model year,
Installed by Dealer.
How was your experience with it?
I hope it is never used because it falls over and exerts itself.
It looks very good and can be a dress-up.
Red and Blue Anodized are available.
It is very good that it does not stand out badly due to the thin Ring line.
The structure itself is also very beautiful.
The surfaces do not protrude too much, so they do not get in the way.
When there was a Damage, I was told that I could purchase the parts Single Body from AELLA,
Maintenance afterwards can also be assured.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH Daytona675, TRIUMPH STREET TRIPLE 85, BMW S1000RR, BMW S1000R, Others Screw diameter:M8
Slider and Stand Hook
[How is it used?
Used as a Slider and Stand Hook for the rear section
Was the one you received as per Image?
No change from the image.
Was the installation difficult?
Installation is very easy, but the screw holes are made of aluminum,
Care must be taken in Torque management, as screwing in too much will make the screw holes ridiculous.
How was your experience with it?
The shoes are just right and look great when worn.
Screw mounts are available in Red or Blue Anodized.
The inlays of the Outer and Anodized sections are very precise and perfectly designed.
Be careful not to put it in at a bad angle, as you may bite it.
Anodized processing is also very clean.
The engraving is likewise very clean.
All of AELLA's products are extremely accurate.
As a Slider, I would have to fall over to know for sure, but after examining it, it seems to be doing its job well, so I adopted it.
It can also be used as a Stand Hook, which is very convenient.
[Included Parts:were they on?
A special Mounting Bolt is included.
A simple Instruction Manual for handling is available.
[Was there anything that disappointed you?
Nothing in particular. Perfect.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail