Reviews
The atmosphere changes when viewed from a distance.
Cap of RadiatorCap.
This is the only place where it is commonplace to have fully functional parts, so even if the surroundings were made of carbon parts, there was no color here.
However, there were no elaborately designed cap covers for complete decorative purposes in my favorite design.
CoolCap." I tried to find the "Mere Old Man" but there was no way to find it.
The surface treatment of the RadiatorCap had just started to fade, and I went to webike to get a new NORMAL and found this.
The exquisite texture of the machine processing, the discreetness of the design, and the subtle hilliness of the overall design to prevent water droplets and dirt from accumulating.
AELLA is the best in the market with its high precision installation.
Although it is a small component, it strangely gives the Motorcycle an enhanced overall texture when viewed from the side.
The price is a bit high, but looking at the photo of the TYPE 2, which was cut from a solid piece of wood, I think it can't be helped.
Finally, my RadiatorSide cover is made by Moto Corse and is designed along the Cap with no interference at all.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
OEM Product's plainness was unacceptable.
I have nothing to say. I chose this one because I wanted it to be gorgeous and I wanted it to match the Champagne gold line on the Body. View detail
It is harder to GEAR out.
Gear changing Touch is better. View detail
Very good as Design
[How is it used?
Aiming to reduce Damage in the event of a fall
Was the one you received as per Image?
No different than the photo shown.
Was the installation difficult?
Because it is to be installed inside the exterior Cover (Cowl) from the 2023 model year,
Installed by Dealer.
How was your experience with it?
I hope it is never used because it falls over and exerts itself.
It looks very good and can be a dress-up.
Red and Blue Anodized are available.
It is very good that it does not stand out badly due to the thin Ring line.
The structure itself is also very beautiful.
The surfaces do not protrude too much, so they do not get in the way.
When there was a Damage, I was told that I could purchase the parts Single Body from AELLA,
Maintenance afterwards can also be assured.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH Daytona675, TRIUMPH STREET TRIPLE 85, BMW S1000RR, BMW S1000R, Others Screw diameter:M8
Slider and Stand Hook
[How is it used?
Used as a Slider and Stand Hook for the rear section
Was the one you received as per Image?
No change from the image.
Was the installation difficult?
Installation is very easy, but the screw holes are made of aluminum,
Care must be taken in Torque management, as screwing in too much will make the screw holes ridiculous.
How was your experience with it?
The shoes are just right and look great when worn.
Screw mounts are available in Red or Blue Anodized.
The inlays of the Outer and Anodized sections are very precise and perfectly designed.
Be careful not to put it in at a bad angle, as you may bite it.
Anodized processing is also very clean.
The engraving is likewise very clean.
All of AELLA's products are extremely accurate.
As a Slider, I would have to fall over to know for sure, but after examining it, it seems to be doing its job well, so I adopted it.
It can also be used as a Stand Hook, which is very convenient.
[Included Parts:were they on?
A special Mounting Bolt is included.
A simple Instruction Manual for handling is available.
[Was there anything that disappointed you?
Nothing in particular. Perfect.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Slider
Slider installed.
After removing the Side Cowl, remove the Under Cowl.
After supporting Engine with Jack
Remove the Engine Mounting Bolt.
Base plate is co-tightened with attached bolt
Cowl back and SliderBody fixed.
The RS660 Cowl has no extra wiring.
(Note only the Wiring of Under Cowl's Shift Pedal)
It can be easily removed, and the work was completed in about an hour while reading the accompanying manual.
Tools required are
Hexagonal Wrench (Cowl removal Short Type is useful in some places)
13mm Socket (Engine Mounting Bolt removal)
Torque of T25 (Reverse side of Side cowl)
8mm Hexagonal Socket (with attached Engine Mounting Bolt tightening torque specified)
6mm hexagonal socket (with SliderBody tightening torque specified)
It would be nice if the
Clearance was fine and the texture of the Anodized Treatment was good, I would recommend this product.
View detail
Position change
The nut holding the handlebar was very torqued!
After replacing the Bolt, the process was very easy and the Wires were fine as they were!
I think the Position will go up a bit and it will be easier.
View detail
AELLA footpeg for Ninja1000sx is the best!
Ninja 1000sx 2023
As a person who has a style of riding on a footpeg, I was dissatisfied with the OEM footpeg that felt so squishy that it looked as if it might break. I was dissatisfied with OEM footpegs that were so squishy that they looked like they might break.
View detail
Even an amateur can feel the effects.
There are similar products from No Brand, but I chose AELLA's. Even an amateur can install it easily and feel the effect immediately. The price is not cheap, but I am satisfied with both the quality and the effect. View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI SCRAMBLER 1100, DUCATI PanigaleV2, DUCATI PANIGALE V4 S, DUCATI 959Panigale, DUCATI PANIGALE V4, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
I think it is more effective than I had imagined.
I have only installed it and have not yet driven the wheel, but when I run my hand around the wheel, it turns more lightly than before the change. I could imagine that the overall improvement will be achieved by accumulating various small changes like this. View detail
I don't want to confirm the effect, but
The workmanship precision of the product is quintessential.
I wish I could spend time as Dress-up parts without knowing the effect.
View detail
I am satisfied
The installation was easy, even for a beginner like myself, because all I had to do was fix it in place with a screw. I was a little worried about whether it would fit on my s1000rr 2023 VERSION, but it did. I would have appreciated it if you had written "2019-2023" or "Hadrill" instead of "2019-" or "2019-2023" for the applicable range. View detail
Fits: DUCATI XDiavel, DUCATI PanigaleV2, DUCATI PanigaleV4R, DUCATI PanigaleV4, DUCATI 1299 Panigale, DUCATI 959 Panigale, DUCATI 1199 Panigale, DUCATI 899 Panigale, DUCATI StreetFighterV4, DUCATI StreetFighterV2, DUCATI Diavel1260, DUCATI Diavel V4, DUCATI Diavel
Highly accurate product.
I use Slider and others AELLA.
The high precision of the construction makes it safe to wear.
View detail
It is indeed AELLA!
2023 Installed on a BMW S1000RR.
After all, AELLA products are well-made and feel firm even after installation.
It was very refreshing to be able to install the RCameraetc. on the stay for the Blinker.
View detail
good-looking
I feel that this is indeed an AELLA product!
Good to make and good to look at.
View detail
Fits: MV AGUSTA F3, MV AGUSTA F4, MV AGUSTA Brutale, BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 1299 Panigale, DUCATI SUPER BIKE 1199 Panigale, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI MONSTER 797, DUCATI Monster Plus, DUCATI SUPER SPORT 939, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, DUCATI Diavel1260
Required for universalbrembo
This is an essential product for bremboUniversalCaliper. Without it, you can't get Center at all.
Kawasaki originally designed the Washer and installed it as standard OEM parts on a Level
Required.
I decided to go with Blue, even though it is $2,000 more expensive.
View detail
Fits: DUCATI Hypermotard 1000, DUCATI XDiavel, DUCATI StreetFighterV4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI MONSTER 1100, DUCATI MULTISTRADA 1200 DVT, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 796, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI Diavel1260, DUCATI HYPERMOTARD 950, TRIUMPH Supersports Daytona 765, DUCATI Monster Plus, APRILIA SUPER SPORTS RS660
Titanium brakes
If Spacer and Washer are titanium, Caliper bolt must be titanium too. So I bought it.
Is there a change? If you ask me? But that's OK. Self-fulfilling.
Titanium is on it. It is fine with
Of course, there is strength, so there must be a slight change.
View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Lightweight, Reflectorless
Introduced to reduce weight of the suspension and to eliminate reflectors.
It's a bit pricey, but it's Titanium, so it can't be helped. LOL!
I haven't installed it yet, but it gives the feeling of doing it to the suspension.
Reflectorless and good looking
View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
To get the bolt center out.
I purchased this product in combination with TitaniumSpacer.
The bolt comes out of the center, so installation is safe.
It's called Titanium, which means it's pricey, but everything is self-sufficient.
View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Required for Z900RS SE
Required for Z900RS SE
This eliminates rattling.
It also affects braking power.
View detail