Reviews
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Good performance product
This is a very good product, after install you can feel better when you driving. good material with good packing nice looking. Thank you webike good customer service View detail
It worked for the 3rd generation GSX1300R HAYABUSA.
I'm not sure if it's necessary to use a 14mm socket wrench or not, but I'm sure it's a good idea to use a small tool for the GSX1300R HAYABUSA in order to keep it in good condition. View detail
Even if it's not a low-headed Bolt….
I purchased this to improve the hardness of the entry of Shift on my 2014 NINJA1000, which had been bothering me since I bought the car used.
Installation could be done without removing the Cowl, so it took only 5 minutes.
However, when installed with the supplied low head bolt, it does not interfere with the OEM change lever, but there is only a gap of about 1mm, which bothered me, so I installed a M6×10 button cap bolt with a lower head than the low head bolt to secure the gap.
Shift entry remains a little stiffer than before, and I feel that the shift feel has become tighter.
I wish it were a little cheaper because it is expensive for such small parts.
View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
For ZX-14R 320Large diameter
If not Titanium, Stainless is sufficient, but it is not sold.
It would not be commercially viable to make the price low at Stainless.
View detail
Fits: DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI StreetFighterV4
It is a product of high design and processing technology
I had installed DucatiPerformance Carbon fender, but I wanted to make the rear area more reflecting, so I changed the spec. to AELLA fender.
When installing, it was difficult to find a way to store the Blinkerretc. cable because the storage space was too small and almost nonexistent.
View detail
Fits: DUCATI PanigaleV4R, DUCATI PanigaleV2, DUCATI PanigaleV4, DUCATI StreetFighterV2, DUCATI StreetFighterV4
Compatible with DucatiPerformance sequential blinker
This is the parts to change when using DucatiPerformance's Blinker with AELLA's Fender Eliminator Kit.
BlinkerQuantity:Pair (for Left and Right) The long hole for adjustment can be set to the Largeest value, but the image is still used for the License PlateQuantity.:Pair (for Left and Right) The Blinker is just visible from the
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR
Effective in reducing Rear sinking
Even if the sag is adjusted, when the load is applied at circuit level, the rear end sinks and the car turns weakly in the secondary turn, so dampers are necessary. I purchased the 4RR exclusive product because it was available this time. The most Large 3.5cm height of Rear is raised. 。 Since the frame position will be relatively higher, it is safe to raise the frame up to 2 cm, since it will lean more deeply when parked on the side stand. View detail
AELLAShift holderNINJA1000SX
Easier to install than expected.
I think I'm going in with GEAR or Snap.
Cospa is not that high.
View detail
It's from the Rakuten Ichiba store...
As I wrote in the Rakuten Ichiba store...
I dare to say that it is not Titaniumium full exhaust, but Titanium 9.5?
(normal use of the root section on the vertical side) was super easy to work with, and I liked it there too!
It's still Titanium, isn't it? TitaniumSound has a lightweight appearance and sound with a lightened and tautened sound.
I still prefer Titanium.
The price is also reasonable.
View detail
Bar end mirror for option719
The handlebar width is very narrow and the position is very comfortable. If you are used to NORMAL, it will take some time to get used to the low speed operation. But it is easy because it is made of aluminum.
The brake hose interferes with the meter, so the mounting position is usually fixed, but it is a good product.
View detail
Fits: KAWASAKI Z900RS cafe, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Vibration? It might be better.
[How is it used?
Touring use from mountain to city driving
Was the one you received as per Image?
Street Image
Was the installation difficult?
The work is easy. But I don't know which way to put the groove on the outside or which way to put it in!
How was your experience with it?
I feel fine vibration....like Large vibration to Small vibration?
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The OEM Screw is Black, and this Screw is Silver color, which is a bit cheap w
It's cheap, that's what it is.
View detail
Good
Anyway, I am doing a Custom to improve the ride. I don't know much about it, but I think I can now do shift changes more smoothly than before. I am glad I put it on. View detail
You can't use the ZX-4RR in the up direction!
I used it to raise 2cm on ZX-4RR, but Link Rod length is 150mm, 10mm shorter than 25R, so it can't be used for raising direction. 25R is 160mm, so it can raise ±10mm=±2cm within 150mm~170mm range, but 4RR can only be used for lowering direction. Please note that 4RR can only be used in the downward direction! View detail
RnineTHandlebar replacement
We chose Silver because we wanted the same color as the OEM.
Position has become easier and more enjoyable to ride.
View detail
Can be raised or lowered freely
I had previously raised the ride height of my 25R with BEET's SportsLINK, but I couldn't stand the gold or silver-colored parts that stood out, so I looked for a product that was less conspicuous and more functional.
Installation is easy if you have a Rear Stand and Jack. However, it is difficult to adjust the plate under the weight of the car because of the narrow space, and it is difficult to turn the plate with Spanner, so it would be easier to turn the plate with Jacketc. There is an adjustment allowance of 2cm up and down, so considering the time and effort required to replace the plate, I think this is a good product.
View detail
Fits: DUCATI Multistrada 1200, DUCATI STREETFIGHTER, DUCATI 1098, DUCATI 1198, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI Multistrada 1260, DUCATI PANIGALE V4
Cannot be installed even though the car model is compatible.
The product cannot be installed even though it is compatible with the car model, and it just won't fit.
AELLA's other products also have high product prices but poor accuracy.
Future purchases are a consideration.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
Simple is fine.
The calm design has a great visual effect!
It is easy to install and I recommend it.
View detail
Fits: BMW R1200RT, BMW R1200RS, BMW R1250RT, BMW R1250R, BMW R1250RS, BMW R1250GSA, BMW R1250GS, BMW R1200R, BMW R1200GSA, BMW R1200GS
self-satisfaction
I bought this lever for my R1200R. I was looking for a lever that wouldn't break when I stand on the ground, and I found this lever. I think it's good to leave the work to the shop because I can't press-fit without a tool. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Caliper seems to drag less ….
There will be a slight impact on the push/pull of vehicles.
I feel that the Chassisisis sound when pushing the vehicle has become a little quieter and the resistance I was feeling has become lighter.
I thought the product was satisfactory to the extent that I felt it was.
View detail
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail