Reviews
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail
AELLAHigh Screen attached.
I generally like it.
The protective film was peeled off only at the screw holes, and then removed after installation and screw fastening.
View detail
Certainly the vibrational frequencies are thinner!
Compared to before installation, the ThornThorn-like vibration between 3000 and 4000 rpm has become a little more mild. I would like to install a heavy bar end with Plus alpha from now on.
For your information, the product number is AT-W0006A for S1000RR to 18 years old cars.
I initially purchased AT-W0007 by mistake. The←s product is for S1000RR '19 and later.
View detail
Dullness Solution
Rubber is just right because it was tacky. It can be installed by anyone right away. 。 If you think Rubber is lame, by all means. View detail
Good vibes
I was really not satisfied with the OEM rubber cap, so after installing it, I am Large satisfied. View detail
Fits: Others , DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4
Vain self-satisfaction.
I know that I can't feel the effect of AELLA's footpeg kit, handlebar, leveret, etc., but I replaced the front and rear caliper bolts with AELLA's Titaniumium bolt. Small boltQuantity:2pcs for the price! The beauty is that people who know what they are doing will notice it. It is true that the weight will be reduced, but the difference is that the weight of the car body will not be a mountain of dust. However, the mechanical beauty of the smallest parts is still AELLA! AELLA is a better match for MonocoqueFrame docas! That's my personal opinion.
TitaniumParts lover and AELLA devotee's Petit luxury item.
View detail
Adhesion is strong.
I put the largest Sticker on both SIDE of the Upper Cowl, but the one on the Left Side failed.
Cowl's R was where the compound was located. Oh, it's the Gap. I pulled it up and it tore.
I peeled it off using my fingernail and Ethanol, but the adhesive was so strong I thought my fingernail would come off.
The Right Side was applied beautifully, so it is already on Quantity.:I am pondering whether to buy 1 Set.
View detail
Fits: DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI SCRAMBLER 1100, DUCATI Multistrada 1260, DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER S
I am self-satisfied.What is the effect experience with Single Body?
After finishing the improvement of riding position and appearance customization, we started to improve the driving performance and feeling by introducing functional parts. Replacement with AELLA Axle Shaft.
At the same time, Shaft collar and this nut were also replaced. Material at a reasonable price.:Even with Titanium, there is no way to experience the effect of these parts alone. It is a world of self-satisfaction.
It is a good product to temporarily satisfy the uncontrollable greed and self-satisfaction of AELLA believers. (Laughs)
View detail
Because OEMCover is not cool.
I bought this because the OEM Cover is not good looking, and I was worried about the Rear Axle guard, but at the time of purchase, I was considering an external exhaust system, and there was a possibility that it would interfere with some of the exhaust systems, so I decided to go for the easy way out.
The design is much cooler than OEM. Personally, I think it would have been nice to have a product without the word "Manufacturer" or with a simple design.
Also, the cover itself is reasonably stiff, so I think it will protect the Swing Arm if the fall is just a standing fall.
As others have said, the space between the pins is too narrow to fit easily, and since I didn't have a plastic hammer, I couldn't knock it in, so I widened the pins a bit.
Also, due to the trial and error process, the grooves were scratched quite a bit by the pin, and the pin's clamping side (the side that goes out) was sharp, though not sharp, so it scratched quite deeply.
When I wiped it with Plexus, it became less noticeable, but when I left it as it was, it stood out as Large, so I think I need to be careful when installing it.
View detail
Fits: DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PanigaleV2, DUCATI StreetFighterV4
Luxury. Dobo to dobo.
[How is it used?
Purchased at the same time right after purchasing the vehicle.
I did not install it at Dealer, I did it myself.
Was the one you received as per Image?
At first I only saw the picture, and I liked the Cut-out feeling of Aluminum, so I bought it, but
The texture was wonderful, just like the picture.
The only thing is that the packaging was somewhat unreliable and the parts were moving around in the box ×.
(It's aluminum, so if you bump it, it will be scraped off, so please pack it so that it doesn't move.)
Was the installation difficult?
I installed it on my Panigale V4SP, although it was not a compatible model.
The Panigale itself is a vehicle that is intended to be used in Race, so the OEM Fender is a BoltQuantity:I just stopped at 2pc.
The structure is very easy to remove.
As for the point that I had trouble when I actually installed it, the connector of Blinker and License Plate Light is big, so it is quite large and strange to push it in at the time of installation. Because there is almost no space which can store an extra wiring and a connector in this product side, it is pushed into the body side, but because there is not much room in the body side, the skill of the wiring is questioned.
However, I had no trouble assembling this product itself with the Instruction Manual being very thorough.
It is installed properly on the Panigale V4SP.
So I think the only thing I struggle with is storing the Connector and Wiring.
How was your experience with it?
I'm using a Blinker with an Active License Plate Holder, so it's not a pure installation, but the Panigale Rear that was so big has been cleaned up.
There is no cheapness, and the Cut-out feeling of Aluminum is well understood from the side, and it produces a high-class feeling.
[Included Parts:were they on?
Yes.
Everything I needed for installation was included.
[Was there anything that disappointed you?
It will not fit perfectly on the removed part, but it will float slightly.
Personally I'm not too bothered by it, but I don't like the idea of rolled up sand or Dust getting in there either.
I would like to fill it with Sponge or Rubber sheet.
[It might be a good idea to buy them together].
If you think OEM Blinker is not good enough, I recommend you to buy Active's Blinker with License Plate Holder.
It doesn't assert itself too much, and it refreshing around the rear.
View detail
It's not bad, but the cosmetic?
It is the same color as the Front Axle Slider and the balance can be taken, and it is not bad, but I think the price is high. If it is half price at least, I think it is a bargain.
Is the Material penalized, or is it just enough to Cover you if you have a light standing gouge?
I don't think it's a replacement for Slider.
Well, Slider will be replaced if it falls, too, but it is Style outstanding compared with Rubber cover of NORMAL.
Installation is very easy, just remove the NORMALRubber cover, pull out the Split Pin, put it on and insert the Pin.
View detail
It's not half as luxurious as it sounds!
The cap is well machined so the Snap pin is a little tight but it stays in place. It's a lot more expensive than the OEM Rubber cover. This is a great product.
Material:I think PlasticCap can be expected to serve as a slider in case of a fall.
However, I think this price is still too high just for the Cap and Snap pin.
View detail
This is exactly the Parts I wanted.
The Z900RS must prepare the split pin when adjusting the chain.
I was looking for a Beta pin that is both fashionable and easy to maintain, and this is exactly what I bought it for.
I'm very happy with the accuracy of the NutCover, and the Pin is not a waste of time.
I dare to say that the drawback is that the price is too high and the end surface of the Pin is poorly finished and does not slide in comfortably as it is.:It's Stainless Steel, but the color is not good, so I polished the edge surface to be smooth, and the PinBody is also polished to Polished (although you can hardly see it)
I feel the mark printed on the cap is noisy personally, but it is bearable. However, because the position of the hole and the print are not matched, when you want to adjust the position of the mark, you need to adjust the position of the Axle Shaft.
It takes a certain amount of effort to pull out the pin, so I think it won't come off while driving or get tricked on the road, but I fixed the wire with insurance.
View detail
Fits: DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It is a firm impression rather than it was effective to the damage prevention up and dress-up up by the stepping stone to an oil cooler and having also considered ! stainless raw material. Since it was attachment by double-stick tape, before knowing,
It is a firm impression rather than it was effective to the damage prevention up and dress-up up by the stepping stone to an oil cooler and having also considered ! stainless raw material.
Since it was attachment by double-stick tape, before knowing, it did not separate or slight uneasiness was, but it became touch good.
View detail