AELLA Motorcycle Brakes Reviews

Filter

Write a review and get Webike Points!

Reviews

AELLA Brakes Replace Oil Filter Cartridge Type (HONDA/YAMAHA/KAWASAKI Series) Clear all

AELLA

14 Jul 2022

Master Cylinder Tank Cap (DUCATI)

Fits: DUCATI GT1000, DUCATI ST3, DUCATI ST4s, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER848, DUCATI MULTISTRADA 1000

Japan User(translated)

4/5

DUCATI purchased with the new car: Although it was a street fighter, a fluid leak occurs about two weeks after the master cylinder by the side of a clutch.
Although I had you exchange by Mr. Dealer, of course, a recurrence is anxious too.
.
.
Although it is goods of Mr. brembo under the sun, changing is slightly wasteful, but necessity knows no law.
It introduced by the reason for saying.
Naturally exchange is bolton.
Preeminent for a feeling of possession, since it is a place which certainly goes into eyes into riding.
It is aluminum shaving and a thing high grade feeling is the presence which is not in the thing of very much others.
Although color chose the white this time, silver is the touch which became somewhat whitish.
It is the kana which some mischiefs can prevent since the attached thing is HEX although the screw which has clung was + type!? A detailed report is a diary DOZOhttp://imp.webike.net/commu/diary/0032830/ View detail

AELLA

21 Apr 2022

Titanium Bolt (Rear Caliper Mount)

Fits: DUCATI StreetFighterV4, DUCATI SUPER BIKE 9916, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SS800, DUCATI SS1000, DUCATI Sport, DUCATI PAUL SMART1000LE, DUCATI PANIGALE V4, DUCATI PanigaleV2, DUCATI Multistrada 1260, DUCATI Multistrada 1200, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1000, DUCATI Multistrada 1100/S, DUCATI MONSTER796

Japanese Webike user

4/5

Self-satisfaction of AELLA believers

After replacing 4 Front, I still thought that the front alone was one hand. (Just him?) The replacement arm is shorter than the Front arm, and there are fewer of them, so the effect of weight reduction is even less noticeable than the Front arm. It is easier to see than other cantilevered swing arms. (Easy to Appeal) However, I wonder if the Manufacturer would be offended if I said that it is just AELLAMania's self-satisfied Parts.
It is not a part that is about cosmetics, but it is a good medicine for the custom disease of Titanium lovers if it can satisfy their temporary greed and petit self-satisfaction for less than 10,000 yen. View detail

AELLA

09 Apr 2022

Titanium Washer (for Brake Mount)

Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S

Japanese Webike user

4/5

Bolt Exchange and Quantity, a behind-the-scenes help:Set

Bolt and Quantity:According to AELLA's explanation, the Bolt's Center is exactly where it should be. I understand it in theory, but I am not sure about it. I honestly feel that Bolt alone is a bit of a letdown, and although it's expensive, it's a good thing that it's Quantity.:Replaced by a set, including Bolt, but with weight saving effect and positive position Quantity:I can't feel the effect of Set at my Level (laugh).
Well, that's fine.
Even though weight reduction under the Spring is said to be highly effective, the average rider will not be able to experience it unless they replace the carbon wheel or mag-forged wheel, right?
It may be a good PARTS to satisfy self-satisfaction and uncontrollable greed for a small amount of money. View detail

Titanium Bolt (Front Caliper Radial Mount)

AELLA

09 Apr 2022

Titanium Bolt (Front Caliper Radial Mount)

Fits: DUCATI Hypermotard 1000, DUCATI XDiavel, DUCATI StreetFighterV4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI MONSTER 1100, DUCATI MULTISTRADA 1200 DVT, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 796, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI Diavel1260, DUCATI HYPERMOTARD 950, TRIUMPH Supersports Daytona 765, DUCATI Monster Plus, APRILIA SUPER SPORTS RS660

Japanese Webike user

4/5

It is difficult to experience the effect, but it is satisfying.

When I first picked up a Titaniumium Bolt at my favorite shop a long time ago, I was amazed at how light it was. I knew that it was an excellent material, but I was not sure about its high price and the effect it would have on my experience. (so-called "cosmetics") It was not easy to get a hold of it. We have already finished replacing the parts for the 959, which is one of our favorite cars, and we would like to seek a higher quality driving experience by installing functional parts, but we need to find something to do before we can do that. (資Gold) No room for
The new product was introduced to reduce weight under the Spring suspension, which is said to be highly effective in such a situation. I am a believer of AELLA, but my desire for something else has been aroused....
To be clear, the weight reduction of 4 Bolts cannot be experienced in my Level in driving.
That's all that matters! I believe that every little bit counts, and I will replace disc bolts and rotor bolts as well, but I can't afford carbon wheels and mag forged wheels.
The fact that the Titanium is made by AELLA is indeed a good thing, as it gives the presence of Titanium to those who know what they are doing when they look into the Caliper. (If it is Titanium, that is.) The satisfaction is still higher than that of the other two.
Considering the cost performance, I can't recommend these parts to everyone, but if you want a casual Petit self-satisfaction, I'd be happy to put them on. View detail

AELLA

13 Dec 2021

Tank Cap for BREMBO S15 Type

Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI MONSTER 1200S, DUCATI STREETFIGHTER, DUCATI MONSTER 1200R, DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI HYPERMOTARD821, DUCATI Monster 1200, DUCATI 959Panigale, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI 1299Panigale, DUCATI 899Panigale, DUCATI 1199Panigale, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI Sports touring

Japanese Webike user

4/5

It's self-satisfying

959 Panigale Clutch for Front brakeTank and Quantity for Fluid Tank:I chose the Titaniumium color because it is a little darker than the Champagne gold. Is it plain at a glance? It's easy to get caught up in the impact of the appearance and the price because it's not about the function of the small parts. Quantity:Pair (for Left and Right) I think there are times when I do.
The price is not cheap, but I think the quality is worth it. It may just be self-satisfaction, though. View detail

AELLA

13 Dec 2021

Tank Cap for BREMBO Round 2-screw

Fits: DUCATI SuperSport, TRIUMPH Daytona675, DUCATI MONSTER 1200S, DUCATI MONSTER1100/S, DUCATI Multistrada 1200, DUCATI Sporttouring, DUCATI Sportclassic, DUCATI PANIGALE V4, DUCATI Multistrada 1260, DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD821, DUCATI 899Panigale, DUCATI Hypermotard 1000, DUCATI 959Panigale, DUCATI 916, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1098

Japanese Webike user

4/5

Self-gratification for AELLA believers? Maybe.

959 Panigale with for BrakeTank, for ClutchTank and Quantity:Pair (for Left and Right) I was not sure about Champagne gold, but I decided to choose this color considering the aging (tanning) of Anodized.
I have installed AELLA products such as Footpeg, Separate handle, Lever, etc. I am impressed with the quality as well as the exquisite position and operability.
This product is not about function, it's about looks and custom parts, but even in that, there is AELLA's attention to detail. The top surface of this product is not flat, but it is inclined slightly to the circumference side with the center of the circle as the apex. What can we get from this? The only thing that comes to my mind is that it makes it easier for water to fall off, and I don't think PRESS or a mold could do this subtle finish. Even if it's not obvious at a glance and only the owner knows about it, the attention to detail is what makes it so satisfying. It is hard to say that it is relatively cheap, but it is a part that you will always see while riding, so this product is not too flashy and has a high quality.
I'm thinking of replacing the Cap with a Clear smoke Tank, as the Tank itself is starting to look poor with the high quality of the Cap.
Even if you replace the cap and tank, it is much cheaper than the all aluminum branded tank kit. Well, if you think about it, you might be able to say that the cost is not so bad. View detail

AELLA

21 Jun 2021

Titanium Washer (for Brake Mount)

Japanese Webike user

4/5

To remove the Reflector.

I used this to remove the Reflector from the Front brake caliper on my Panigale V2.
By the way, if you use Titanium for Bolt, the rigidity of Caliper is supposed to be improved, but it is expensive and not for circuit use.
If you look closely, you can see that it is a Washer with a stylish R processing.
The price is expensive, but given supply and demand, it's subtle.
It seems to be a standard product for those who want to take Reflector in V2. View detail

AELLA

27 Jan 2021

Tank Cap for BREMBO Round 2-screw

Fits: DUCATI Sportclassic, DUCATI PANIGALE V4, DUCATI Multistrada 1260, DUCATI MONSTER1100/S, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI HYPERMOTARD821, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD1100/S, DUCATI Hypermotard 1000, DUCATI 959Panigale, DUCATI Sporttouring, DUCATI 916, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 899Panigale, DUCATI SuperSport, DUCATI 1098, TRIUMPH Daytona675

Japanese Webike user

4/5

Great quality.

Replaced with S15Type at the same time.
It is very easy to install, just remove the tank cap of brembo, transplant the packing inside to the tank cap of AELLA, and install it with the bolt of the attachment. brembo is Plus plate screw, AELLA is Hexagon Socket plate screw. You need to be careful about the tool.
The design is sophisticated, so I have no complaints, but Champagne gold is paler than I expected, so I may change to Black soon. View detail

AELLA

26 Dec 2020

Tank Cap for BREMBO S15 Type

Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI 959Panigale, DUCATI Monster 821, DUCATI Monster 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD1100/S, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI Multistrada 1200, DUCATI SuperSport, DUCATI SCRAMBLER 800

Japanese Webike user

4/5

The color is close to the color of Oil tank, so the color will be assimilated

The quality is perfect, Parenthesis is good.
I hesitated between Champagne gold and Black because the car body is Yellow, but I decided to change the impression to Champagne gold because the brembo de fault color is Black.
The result is a little subtle, the color is slightly similar to the color of the Tank (the color of the transparent Oil), and the impression is not clear. I regret a little bit that it might have been better to use a darker Gold.
I'm leaning towards Black and Silver for the other Parts, so I may switch to Black after using it for a while. View detail

AELLA

05 Dec 2020

Titanium Washer (for Brake Mount)

Japanese Webike user

4/5

I have a feeling it's not to be underestimated.

The Bracket of Fork of the GSX-R1000 L7 Fork does not have a boss (I think the Tokico Caliper-equipped car had one), and there is a little bit of rattling to tighten the Bolt that secures the Caliper, and I always felt a little frustrated when I tightened it. I was skeptical to buy it to solve the problem.

I was anxious to see if it would fit the so-called "Suzumbo", but it was able to be used with no problems.
The BoltHead side of the BoltHead has an escape, so even OEM Bolts are safe.

When you put it on, the feel of the brake lever is slightly different from before.
It may have the effect of creating a center, but the Self Alignment makes the clearance between the Caliper bolt and the Caliper Body less, and the image is the force that makes the Piston work to slide the Caliper. It is like the force that is originally required for the disc brake to pinch the Brake Disc.

Similarly in the direction of Brake Disc rotation, I wonder if the Fork can catch the force that the disc is trying to rotate the Caliper? I considered this.
Perhaps there is a Brush-bo effect as well.

I don't think it's the kind of part that will change the braking power itself, but the Touch will certainly change. If you're looking for a solid touch, this is a good one. View detail

AELLA

29 Feb 2020

Titanium Caliper Bolt (BMW)

Fits: BMW R1200GS, BMW R1200RS, BMW R1200R, BMW R1200RT, BMW S1000R, BMW S1000XR, BMW R1200, BMW 1250GS, BMW S1000R, BMW S1000RR, BMW RnineT, BMW 1250GSA, BMW S1000RR, BMW R1200GSA, BMW 1250RS, BMW 1250R, BMW 1250RT, BMW R1200RT(Water-cooled MODEL), BMW 1250RT(Water-cooling MODEL)

Japan User(translated)

4/5

I'm also glad to see Torque printed on it

It is used for the Caliper bolt on the S1000RR
Compared to the OEMBolt, it's really my personal opinion that Brake is tightly I felt like I did
It is true that the strength is increased, and with the OEM Caliper bolt, where it is tightened with 38N, this The Titaniumium Bolt is tightened with 43N
It may be because the Bolt is able to tighten with a higher torque than the OEM, or it may be because the Brake did you tighten it up? I don't know, but I got a sense of that
I'm also happy to note that the Torque is printed on the Bolt I have to remember this because I often take it off and put it on..
But I think it's a good point because you can save yourself the trouble of looking it up on the Net or looking at the manual every time I think View detail

AELLA

13 Jan 2019

Titanium Caliper Bolt (BMW)

Japan User(translated)

4/5

Luxury TitaniumParts

AELLA AELLA Titaniumium caliper bolt
Titaniumium washer (AT-W0001) Optional
It's overspecifications for everyday use, but it's a good choice for the race track Parts developed to improve marginal performance is a great functional beauty

http://www.aella.jp View detail

AELLA

01 May 2013

Tank Cap (for Brembo S15 Type)

Fits: DUCATI Multistrada 1200, DUCATI Monster 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI HYPERMOTARD821, DUCATI Monster 1200, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100/S, DUCATI 1198, DUCATI 1098, DUCATI 848, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI Sports touring, DUCATI 959Panigale, DUCATI Sports classic, DUCATI Multistrada 1200, DUCATI SCRAMBLER 800, DUCATI Multistrada 1260, DUCATI PANIGALE V4

Japan User(translated)

4/5

Since he did not want to change a pure atmosphere, the thing which is such a Simple was looked for. Very much satisfied, although it is small parts.

Since he did not want to change a pure atmosphere, the thing which is such a Simple was looked for.
Very much satisfied, although it is small parts. View detail

AELLA

14 Feb 2011

Tank Cap (for Brembo S15 Type)

Japan User(translated)

4/5

DUCATI: Equip a street fighter.
Since [ with it ], it also exchanges rear sides for the occasion which exchanged the master cylinder tank cap of the front. [ appropriate for / although normal is goods of Mr. brembo under the sun / in fiber reinforced plastics (!?) / Yasu ]
Although the same white as a front was chosen, silver is the touch which became somewhat whitish.
Moreover, it is aluminum shaving and a thing high grade feeling is the presence which is not in the thing of very much others.
It is only the easy exchange which turns attachment and it attaches.
Or [ that it is slightly weak to a theft ].
Although it may see rapidly and he may not notice then so, a feeling of a fashion comes out.
A detailed report is a diary DOZOhttp://imp.webike.net/commu/diary/0032830/ View detail

AELLA

14 Feb 2011

Master Cylinder Tank Cap (DUCATI)

Fits: DUCATI GT1000, DUCATI ST3, DUCATI ST4s, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER848, DUCATI MULTISTRADA 1000

Japan User(translated)

4/5