Reviews
The construction is a bit ….
As others have said, the base of the wiring screw interferes with the installation screw, so you have to avoid it or it will come off. 。 I was able to wriggle out with a single shot. View detail
GALE SPEED Rear brake master cylinder
I was disappointed that Attachment was not included in the package.
The response was good, as they returned Gold immediately after I told them about the situation.
I purchased the PartsShop exhibit in time for my scheduled Touring, and I felt that the Rear brake was easier to operate with more Stroke than the NORMAL.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA XSR900
TYPE-SB1 Rear Aluminum forged Wheel
Ordered 3 months ago and was cancelled by itself due to lack of stock 3 months ago View detail
Even with all this.
I bought them together for my GALE SPEED Radial pump master, but after the order was placed, only the master was cancelled due to an undetermined delivery date, even though it was available for purchase on the product screen.
What should we do if they sell so much without MASTERBody?
View detail
even with all this
I bought them together for my GALE SPEED Radial pump master, but after the order was placed, only the master was cancelled due to an undetermined delivery date, even though it was available for purchase on the product screen.
What should we do if they sell so much without MASTERBody?
View detail
It breaks easily.
It breaks easily.
It breaks easily.
It breaks easily.
View detail
Don't turn off the We-Big! It breaks easily.
I write imprements and they erase them!
Collusion? If you're going to erase bad reviews, don't ask for imprements in the first place!
It breaks easily.
I bought two of them and both broke right away.
Even if you contact Manufacturer "Body issues." He said.
Bad item and bad response!
View detail
It breaks easily.
It breaks easily.
I contacted Manufacturer and they said it was a problem with the car body.
Poor product and poor response.
View detail
Useless.
Gail's Radipon (both Brake and Clutch) Purchase at the same time as
Ruptured in less than 2 years!
I bought the same one without Objection processing etc., thinking I had accidentally pulled a HaGap, but it broke again in a year and a half!
Contact Active, but It's not a good match for the body of the vehicle." He said that it was the responsibility of the buyer.
If it's a big single, but if it breaks in a parallel 4-cylinder, it's not for sale, is it?
I will never buy again, nor will I buy Active products. I will use a different Manufacturer's product for my current one as it is updated.
No trust in Active products!
View detail
Improvement desired
I bought the same Switch Wiring I had been using because it had come off the base.
Easy to install, yet does not fit well...
Looking closely, one of the two screw holes was gapped by 3mm.
I had no choice but to widen the hole with a File and finally install it.
However, this time, the wiring came off from the soldered part, and I had to re-solder it.
I had to use it for half a day just to replace the Brake switch.
The Master Cylinder is good enough, but I think the Switch that comes with it is very poor.
Since I went through the trouble of buying it, I installed it, but I'm not sure how long it will last.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI ZX-25R, KAWASAKI Ninja250, KAWASAKI ZX-25R
It didn't take long...
The thing looks good and I liked the shape, but after using it for about half a year, it started to shatter with Inner wear.
InnerSingle ItemSince I heard that they don't sell InnerSingle Item, I have to throw it away even if it is not decreasing Outer.
It's expensive. ・・・・
When I look at SUNSTAR's HP, it seems to be doing Repair, so I'm switching.
It's been a long time since I've been disappointed.
View detail
Weak Wiring Joints
The MASTER from GALE SPEED is very good, but the Wiring joint from this Switch is not.
I used them on my previous Motorcycle and they didn't come off then.
This time the Wiring came off the Switch after about a year. I feel that there is a quality gap in this product. I hope you can improve the wiring joint because it may cause a rear-end collision. 1
View detail
Fragile and delicate, with many problems.
A thin wire is stretched from a small SwitchBody with solder.
I broke it when I installed it, so I took it apart, but there are a bunch of problems
? Wiring of the solder is delicate and the structure is to pass Screw under the wire.
This makes it necessary to bend the root of the soldered wire, which puts a lot of load on the delicate root part. At least, the wire should be soldered diagonally to avoid Screw. When it bends, the root is already wobbly and it is likely to be torn.
The Switch box's black casing is made of plastic coated with a steel-like finish.
When you tighten the Banjo adapter or Hose, if you put Spanner etc. on it, it will be cracked.
? No water resistance.
The Handlebar part gets wet in the rain or when you wash your car, but it is a normal electronic switch that is not water resistant. If you are not careful, the inside will rust soon.
As mentioned above, the root of the wire is very delicate and fragile, so it's best to hold the wire completely in place when attaching the terminals to the wire; working with the SwitchBody will definitely tear the wire.
I'm buying an additional one because I broke mine and it's a Gale MASTER exclusive, but I don't want to buy this one if I can help it. I'm not surprised that it has a bad reputation when I buy it.
View detail
Minor change required
Installation is super easy with Bolt and Nut. The problem is quality.
Isn't the connection between Body and Wiring too poor?
MASTER and Quantity:It's a Set product, but the drop in quality is terrible.
I don't think it's a product of the same company.
View detail
It rusts, breaks, delays the delivery date.
It rusted bright red the next day after installation.
When I contacted them, I was told that it was a significant Gold amount and that they would repair it for a fee but it would rust again soon.
I had no choice but to use it and before I knew it, the Lever Adjustment Screw had broken off and was gone.
I'm making a warranty inquiry, but it's taking quite a while.
View detail
Breakdown after less than 1000km
Garage storage, 1000k miles on the road and it's probably defective.????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? View detail
Since GALE-SPEED correspondence has only Colet at OEM of AFAM, it purchases. Since it is a Sticker and needlessness, I want you to cut down the cost more.
Since GALE-SPEED correspondence has only Colet at OEM of AFAM, it purchases. Since it is a Sticker and needlessness, I want you to cut down the cost more. View detail