Reviews
I failed
If you process Wiring, you do not have to have a Switch, but I'm afraid when it comes to starting even if I do not hold it, so buy a Switch for Clutch with the idea that Switch is better.
I think that the shape changed more than Switch of the previous Gail MASTER and it improved with SMART.
Mounting Easy.
Compared to Nisshin 's Switch, it was truly uneasy with this indeed, but there are no problems due to difficulties in moving, but nothing. OEM so it's natural.
For Clutch's Switch found for KAWASAKI separately after purchase.
I only failed with. It is not a burden of doing Large (Lol)
View detail
It seemed unlikely Bracket
I used it to divert Kawasaki H2 Reserver tank. This and POSH's H Type Rubber (http : / / www. webike. net / sd / 1257302 / ) Is used.
It is exactly the same as Length, but it is a difficult point that you can not adjust the angle. Pliers were sandwiched between Dustcloths and the angle was adjusted so as not to be scratched. Because it is Aluminum you will hear what you say easily and easily. If it solves it, Bracket that does not claim is felt nice.
View detail
Exchange
When I exchanged Tank Bracket from a thing attached to MASTER to a thing outside the company, I lost the length of Hose and replaced it with this Hose. Because there is room in Length it is good to be able to use Cut after matching with Tank Bracket. View detail
Fits: KAWASAKI ZX-14R HIGH GRADE, KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI ZX-6R 636, KAWASAKI ZX-10R, KAWASAKI ZX-14R
Because nobody is wearing it
SUNSTAR when saying disc.
Everyone told me that I made him Gail from Tsumannai.
The result is good.
Changing to Beringer's Caliper, the squeal that occurred changed to this disc and it fell down.
Good appearance.
Although not conspicuous, among those who caught himself by Beringer's Caliper, several people "It's not SUNSTAR! What is this disc?" It will be fun to be.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-6RR, KAWASAKI ZX-6R
Large people feel
14R's OEMWheel was a little Mischief feeling and I disliked it because I disliked it.
The result is very satisfied as the Large man is overwhelmed.
Because it got lighter, running became light.
However, the straight running stability has fallen.
I had to use my mind on a rough road surface.
I think that addition of Steering damper or Axle Shaft is better together.
Among the Aluminum Wheels I examined, the second lightest product.
(By the way, No. 1 is OZrACING)
No more light products will be a weapon in Circuit, but I think that it is unsuitable for me to use Touring for Main.
View detail
It is still nice..
Foil is always installing GALE SPEED. For this price, I think that Cost performance is very high. There are other Wheels, but the price is high! I think that it is natural that good things are expensive, but the price is Reasonable and the price is a good thing for this product. I am very satisfied..
I think that we will install even after changing the car model after this.
View detail
Since it leaked, I got it for Repair
There were countless Cracks in separate Tank of NISSINBrake attached since the time of purchase of second-hand KLX so I leaked it so I bought it for Repair
The reason for choosing Gail this time seemed to be able to install anything (The type of Brake now is unknown, too)
Installation was easy if direction and direction of Hose were matched (Tank rotation is still good)
View detail
I purchased GALE SPEED
I purchased GALE SPEEDType R so purchase this Sprocket together.
ZEPHYR 750 Final is OEM 36 Ding, but there is no Size of 525 - 36 dolls except for Gail.
There was also a tea called 520 Conversion, but this time we will go with 525.
It's a bit expensive but I like the Bronze's astringency quite a bit.
View detail
Design is the best!
It is an inseparable edge on the GALE SPEED wheel. There is no choice but to buy it
Do not hesitate in the reputation that Steel will last long Here purchase,
Ultimate meat extraction emphasizes Wheel.
Will not it be more affordable just for the price.
View detail
To Hub bearing
I used it for Hub bearing of Rear of GROM.
It is safe because it is same Both SidesSeal as OEM.
Accuracy etc. There was no problem either..
As compared with OEM, it seems that there is no difference in Large ...
View detail
GALE SPEEDGALE SPEED Sprocket
I replaced it from Aluminum to a durable Steel.
I think that it is good for design because it has so many meat punctures.
However, it is heavy even if we extract the meat up to that point. (It is clearly different even if you bring it with your hands. It is about twice)
It is not recommended for people who place importance on weight reduction.
It is recommended for those who like durability like me.
View detail
GALE SPEEDGALE SPEED Oil tank
I am using it for RCS.
I hope for the first time with Small.
I bought this, not the brembo OEM, I got it.
I liked handling well as well.
When bleeding out, this Small stuff is troublesome
View detail
Trial and error 2
I bought it as Master Cylinder Bracket of Clutch & Brake attached to Bar handle.
This product is MASTER and attached to Linder Bolt and Washer are accompanied by the place is kind, but I think that it is an expensive part as a Bracket kind Single Body.
I bought it for Clutch & Brake's Master Cylinder Bracket, but actually it was possible to install Hose in only the Clutch side or adjust the angle and install it in a proper shape, but the shape on the Brake side is incompatible with this product It was. I planned to use it by bending it but it is a hard part Pliersetc. Then, it was not possible to process as I thought.
I think that it is good if the shape fits well because it is a strong part.
View detail
It is necessary to arrive at GALESPEED.
I bought it for GALESPEED installation.
When consulting with Manufacturer's Active, "Recommended to replace every 5000 kilometers" It is said that.
Although the result of wearing is a comparison with OEMAluminum, vibration of Shift change increases, and it comes from Seat.
Looking at this product itself in hand, I understand it is a very reliable structure in JAPAN.
Postscript
Image is not after installation but before replacement.
View detail
I've bought front and rear for my ZRX1200DAEG.I've chosen white.I felt it reliable, because I had been using the same type for my GSX1400. But actually, things like the shape of the attachment had been remodeled a bit, and I felt the change.Al
I've bought front and rear for my ZRX1200DAEG.
I've chosen white.
I felt it reliable, because I had been using the same type for my GSX1400. But actually, things like the shape of the attachment had been remodeled a bit, and I felt the change.
Also, I liked it because it came with this cut-out air valve which was not attached to the ones for GSX1400.
I heard that the rear wheel of ZRX was out of alignment. But since my bike had titanium full exhaust system, I judged that mine had a good balance. And so I chose 0 for the off-set amount.
That itself was good, no problem. But to make the off-set amount to 0, I needed to flip back the drive sprocket and install it. And I had a bit of trouble purchasing this special socket required for detaching its square fixing bolt.
But on the whole, I am satisfied with it, for it has good design and worth its price.
View detail
I was thinking of a major change replacing my wheels and decided to chose GALE SPEED. At first they felt so light it worried me. My worries didn't last long but the stability when riding on the highway still bothers me. There is no blurring so it must
I was thinking of a major change replacing my wheels and decided to chose GALE SPEED. At first they felt so light it worried me. My worries didn't last long but the stability when riding on the highway still bothers me.
There is no blurring so it must be caused by balancing. It has changed the appearance of my motorcycle, more than I had expected. But you'll need to polish it every now and then to keep it shining.
View detail
It is a Switch ordinarily.When a Clutch is grasped in the state where it is always [ ] pushing, it is a Type which the portion which is pushing the Switch separates and is set to ON.When the Switch was pushed and it was set to ON, when it was the Honda
It is a Switch ordinarily.When a Clutch is grasped in the state where it is always [ ] pushing, it is a Type which the portion which is pushing the Switch separates and is set to ON.When the Switch was pushed and it was set to ON, when it was the Honda and CBR1000RR and the Clutch switch of VFR800 were grasped, but investigating using the Checker, it was natural, but the same action was carried out.
In short, this product is an exclusive Clutch switch of a correspondence MASTER.Although many things were tried with whether the Switch of
VFR and CBR1000RR is attached somehow or other,It did not go very much well but became exclusive elegance after all. -- How about referring [ those who do not want to surely buy it ] to it, since there are those who are using the GALE SPEED and who has carried out pure appropriation?
View detail
He wanted to put N into a GSX1300R HAYABUSA, and I got the Active to surely make. It is felt more obediently [ a gentle Handling ] and light. Six of straight shape are simple too.
He wanted to put N into a GSX1300R HAYABUSA, and I got the Active to surely make.
It is felt more obediently [ a gentle Handling ] and light.
Six of straight shape are simple too.
View detail
Also after attachment, I can move a Tank and think that it is very good. A Fluid merely hides in a belt portion by the cause, and quantity is incomprehensible.Although it is not that the amount of Fluids decreases so ...
Also after attachment, I can move a Tank and think that it is very good.
A Fluid merely hides in a belt portion by the cause, and quantity is incomprehensible.Although it is not that the amount of
Fluids decreases so ...
View detail
Begin Gayle's Sprocket exchange this time. 46 dishes are chosen last time and 48 dishes of normal are chosen this time. The Size of 520 is considering the elegance only for , and it is satisfied with it. Even if it checks removal article, there
Begin Gayle's Sprocket exchange this time.
46 dishes are chosen last time and 48 dishes of normal are chosen this time.
The Size of 520 is considering the elegance only for
, and it is satisfied with it.
Even if it checks
removal article, there is no so intense decrease and durability is not bad.
In the case of
, however Gayle, when wear and consumption of a Hub damper, and
and also a Drive Bolt are themselveses violently, it has that it must be careful, and it is at
of 12~18 months, and the time.
Or [ that it is a problem of the intensity of the whole hub of the
Wheel ] ..
It is an improvement Point required.
The
Sprocket itself does not have a problem.
I think that they will be good goods if even
Maintenance Cycle is protected.
View detail