Reviews
hang is there, but no problem.
Chain to Quantity:There is no problem with the functionality, although a hang is required to align the pins when setting. View detail
Heart breaker!
First and foremost, we must note that the BALI in the cutting process is quite bad, and honestly, it is the Level that causes injury.
If it is a FOR JAPAN MODEL product, I think it is a hesitant Level to ship the product as it is.
And it is not very good as accuracy, and the Center axis is also blurred.
However, it does not mean that it cannot be used at all. If BALI is removed sesse-sese-sese and military gloves are used, it is not impossible to use it.
However, we do not anticipate that the product will be used many times, and we hope that you will consider it as a disposable level for this time.
Personally, I would urge everyone to choose a more solid product when considering it as a tool.
well ♪ Hyakkety-yak ♪ It is possible for people who understand the concept of "Level" to purchase the product.
View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
Buy at Wash for Vehicle:!!!!!
[How is it used?
I bought it in a wash-for-vehicle.
Was the one you received as per Image?
It is a micro fiber that is neither too soft nor too soft. It is used for various purposes, such as rubbing after washing a car and applying coating.
How was your experience with it?
Gold amount is cheap, so you can buy Large amount and Stock.
View detail
I removed the OEM Product to check the inside diameter.
The handlebar inner diameter of X FORCE is 17.5mm.
For products with a corresponding inner diameter of 13mm or larger, the Bolt must be tightened considerably to secure it in place. Some products with a corresponding inner diameter of 18mm or larger can be installed, but require some effort.
A little force is required to remove the Grip end of OEM Product.
It can be removed either by wearing non-slip gloves and relying on grip strength to turn it, or by grabbing it with pliersetc. to turn it.
The direction of rotation can be in either direction, as the Screw is not cut off.:Pair (for Left and Right) The connector can be removed by pulling it while turning it to "1".
View detail
It was as expected.
I used it for wipes.
As expected, yellow-colored fibers remained on the car body.
It's easy to tell when the car body is dry.
If you want to buy it by any means, how many quantities of washing and drying in water when you get it in your hands?:Set or repeat, and then use it, I think it will be somewhat better.
Might be good for wiping off Wax
It's not cut and dried, but it looks like it.
View detail
Fits: HONDA CUB90
For the price, it's good enough.
One Side's Mirror was broken and I was looking for something close to it.:Pair (for Left and Right) I bought it when I found it. I didn't expect much for the price, but it was better than I expected.
The plating treatment on the screw threads makes it difficult to bite the first screw, but once the screw starts to rotate, there is no problem to fix it with Smooth. The mirror surface has no noticeable distortion and I am satisfied with it.
View detail
They absorb water well.
I was looking for a Towel with good absorbency at an inexpensive price.
I am satisfied because it is larger than I expected and also absorbs water well.
View detail
Large size can be used a lot.
[How is it used?
I bought this to have something to use under my PCX Seat for now. I use it when it is a little dirty or wet from rain.
Was the one you received as per Image?
I was pleasantly surprised that the size was larger than the Image. It absorbs water well! I'll put it under Seat for now.:I am satisfied as 1 pc.
How was your experience with it?
I wipe Seat down on a rainy day and it soaks it right up! I've also wiped pollen stained areas with Permanent Cleaner and this thing cleans it right up! It is a common Microfiber Towel, but I recommend it because it is convenient to have.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Chain cut is ready!
I purchased this product because it can cut a 530 chain from a 420. I tried several times because I did not know how to use it well, but I was able to cut the chain successfully. If there is an instruction manual, I think I can use it without hesitation. If you press the tip of the Pin against the Pin of the Chain Piece without tightening the Guide, the tip of the Pin will be distorted by the force. Pin tip was distorted by the force. Although the Pin tip is a little distorted, it is working fine so far. If you are a first time user, please work with caution.
The low price made the BALI and Screw parts sore from the beginning, but it was acceptable.
View detail
Effective when riding in a way that keeps the rpm high.
Recommended for those who run 70-80km/h Bypass roads at or above the maximum horsepower generating RPM and are using oil cooleretc. to prevent heat buildup. 。 We are installing it on a CUB. 。 The difference is about 1/3 of the change from Oil that has run 1000 km to new Oil. View detail
Cheap and bastard
Overall, the accuracy is poor.
Defective threads in press-fit Bolt.
I managed to turn it by eyeballing it.
Insufficient strength of Crimp pin.
Probably raw iron. It does not appear to have been quenched and tempered.
After Crimp, Pin swelled up and could not be removed from press-fit Bolt.
In the end, I had to repurchase a Brand item. I threw it away.
Study fee.
View detail
Elimination of long-standing problems
Product Name
MirrorOffsetHolder for 10mm
Item Number
27292419
Vehicles
Grom (JC61)
Number of man-hours
Around 20 minutes
Required Tools
Torque wrench, Hexagonal socket, Combination wrench, Pliers system
Why did you choose this product?
There were other products that extend the length horizontally, but this was the only one that also extends the height. Also, it was available in black and looked luxurious. Also, I had a feeling of trust in the product because Grom's name was mentioned in the Impression section.
Was the one you received as per Image?
It was just as shown in the Image. It looks good with a sense of luxury.
Was the installation difficult?
It was easy:just remove the screw, select the size screw that fits the screw hole, and install it.
How was your experience with it?
The long-standing problem of not being able to see Mirror has been resolved. I was worried about not being able to see what was going on behind me, and I felt it was a hassle to bend my elbows every time I had to do it. It was also very easy to install the pons without changing the position of the wiring such as throttle wire.
[Included Parts:were they on?
There were some things written on the documents etc., such as screws.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Installed on a JC75 Grom. Long-standing problem of not being able to see the back well has been resolved.
Many of you may have had a near-miss with the poor rearward visibility that seems to apply to most moped models.
Since the handlebar width is narrow due to the small size of the vehicle, the OEMMirror is too far inward to see the back of the vehicle due to the obstruction of one's arms and shoulders.
Depending on the shape of the Mirror, it can be much better, but still, your body will be slightly reflected in the Mirror.
This product can be attached to the base of Mirror to offset Mirror to the outside for rearward visibility.
Material:It's Aluminum and lightweight, so it doesn't affect handling.
Bolts of M8 and M10 are included and can be installed on most motorcycles. Some models may require an Opposite Thread Screw Adapter.
My impression of the installation is that my arms used to appear in Mirror, but now only the back of the camera is completely visible.
It is ridiculous that I have had to put up with this for three years now.
Of course, the Mirror is Offset to the outside, which will affect the slip-through. You are on your own in this area.
It is considered a good product with excellent cost performance.
View detail
(There is a slight effect at 6k to 10k rpm.
I bought it a while ago and installed it because of the cooler temperatures.
There is a slight effect at 6k to 10k rpm, but few people may be able to experience it. 。
If the RPMs drop on an uphill climb, the drop will be slightly less.
It is similar to the performance difference of replacing the Plug with a NORMAL??Windshield IRIDIUM, so there is probably only about a 1% difference? The difference is only about 1%.
The specific Merit is when you are on a Corner with a bumpy uphill gradient etc. and you are wondering whether to pull in 3rd gear or 4th gear.
A Stainless Steel Band is included, but when maintenance is a top priority, the Gold Stainless Steel needles are more convenient in some areas.
This is especially recommended for SmallEngine Displacement Volume.
View detail
Brush was quite firm.
[How is it used?
Motorcycle, I bought it to see if I could clean up the Emblem area of my car.
Was the one you received as per Image?
Brush is quite firm, although I thought it would be a little softer.
How was your experience with it?
As the name suggests, it is more of a Brush than a brush, so it takes courage to use it on painted surfaces.
I am glad I used it because it got rid of the dirt around the Emblem.
I don't know about the hairs, as I have only used them on Cowl so far, but they seemed less likely to fall out.
[Points to note]
It might scratch depending on the car body or paint color, so it might be better to try it on an inconspicuous place before using it.
I think it is for footwear and such in the first place.
You might want to write down what Brush is for or something. I was thinking of doing a tepla or something.
How did it compare to other products?
A wide variety of numbers and thicknesses are available and inexpensive.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It fits with Plating and gives it a luxurious look!
[How is it used?
NORMAL hose guide is rusting and Material:I purchased this one from Aluminum.
Was the one you received as per Image?
The size seemed smaller than the Image.
The texture is not bad and gives a sense of luxury.
Was the installation difficult?
I just need to replace the NORMAL Guide so I can tighten the Bolt and Nut. wdisc needs two of them, so I use one flipped over and inverted.
How was your experience with it?
I have driven several hundred kilometers without any problems.
However, I am concerned about the strength of the Arm section, as it is thin and has been stripped of its meat.
I think it will break eventually.
[Included Parts:were they on?
Body and Clamp Quantity:No other than Set.
[Was there anything that disappointed you?
The hose hole was too narrow to accommodate the mesh hose, so the mesh hose was quite limiting.
Material because there is very little Clearance:Rubber protective cover will not fit.
I use Emon's plastic hose cover for protection.
I don't think Normal hose would be the first place to enter.
I was torn between the ▼Titanium color and the Silver.
Considering the balance with the Titanium color bremboCaliper and the planned Titanium color NITRON suspension, Titanium might have been a good choice.
View detail
Very ordinary Mirror, but great cost performance!
I purchased this product because the Gold Frame Mirror that came with my current Motorcycle when I purchased it has rusted away.
The texture is THE NORMAL" It is so extremely normal.
It is not outstanding, but it is not bad either.
There are no complicated adjustment functions, so you can adjust the field of view with one hand while waiting at a traffic light.
The field of view is better than that of other brand products with more unusual designs, but it is not as good as products that claim to have a high field of view.
This is also quite normal.
The target buyers are those who do not want to spend a lot of money, those who are satisfied with NORMAL products, and those who dislike complicated adjustment functions.
As a general comment, I think it is an ordinary product with no flaws at all.
View detail
Fits: HONDA CUB90
I bought this for my SUPER CUB.
Maybe I'm not putting it on the right way.
Unable to install
I put it in the shed as it was…
View detail
Fits: HONDA CUB90
If you're not particular about it, it's a push.
Normal look, and cheap anyway!
It may not suit fashionable CUB riders, but it has good rearward visibility and no complaints for me.
View detail